Got this from Ingo at RedHat.
Most kind regards,
Kristian Bjoernskov, <mailto:[EMAIL PROTECTED]>
Novo Nordisk IT, TCC Network - internet.
Phone: +45 4442 3299. Fax: +45 4442 6061
-----Original Message-----
From: Ingo Molnar [mailto:[EMAIL PROTECTED]]
Sent: 21. juni 1999 16:44
To: KRBJ (Kristian Bj�rnskov)
Subject: Re: RedHat on a Compaq Proleant
hi Kristian,
if you have no other problems with your system, apart from the debugging
message, i'd suggest you to not use the noapic option. We print out the
'unexpected IO-APIC' message only to identify new versions of hardware -
but it does not mean there is or will be any problem with that box. In the
next kernel version we'll remove that message. Thanks for letting me know
(and of course if you _have_ problems with that box, let me know as well),
Ingo
On Mon, 21 Jun 1999, [iso-8859-1] KRBJ (Kristian Bj�rnskov) wrote:
>
> Hi Ingo,
>
> I have a little problem which I beleve you can solve for me. I have a
Compaq
> Proleant 1850 with 2 PIII 500 MHz CPU's. When I boot with the smp kernel
in
> RedHat 6.0, I get the first of the dmesg below. I tried to boot with
noapic
> and got the second dmesg. This looked fine, but my NIC and SCSI controllor
> did not work after that.
>
> I contacted [EMAIL PROTECTED], and they said you possible could
> help me.
>
> Thanks in advantige.
>
> Most kind regards,
> Kristian Bjoernskov, <mailto:[EMAIL PROTECTED]>
> Novo Nordisk IT, TCC Network - internet.
> Phone: +45 4442 3299. Fax: +45 4442 6061
>
> -----------
> Using: vmlinuz-2.2.5-15smp:
> l Wire compatibility mode.
> OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
> Processor #1 Pentium(tm) Pro APIC version 16
> Processor #0 Pentium(tm) Pro APIC version 16
> I/O APIC #8 Version 17 at 0xFEC00000.
> Processors: 2
> mapped APIC to ffffe000 (fee00000)
> mapped IOAPIC to ffffd000 (fec00000)
> Detected 498502310 Hz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 496.44 BogoMIPS
> Memory: 387192k/393216k available (1044k kernel code, 416k reserved, 4184k
> data, 68k init)
> VFS: Diskquotas version dquot_6.4.0 initialized
> Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.26 (19981001) Richard Gooch ([EMAIL PROTECTED])
> per-CPU timeslice cutoff: 100.10 usecs.
> CPU1: Intel 00/07 stepping 02
> calibrating APIC timer ...
> ..... CPU clock speed is 498.4903 MHz.
> ..... system bus clock speed is 99.6979 MHz.
> Booting processor 0 eip 2000
> Calibrating delay loop... 498.07 BogoMIPS
> OK.
> CPU0: Intel 00/07 stepping 02
> Total of 2 processors activated (994.51 BogoMIPS).
> enabling symmetric IO mode... ...done.
> ENABLING IO-APIC IRQs
> init IO_APIC IRQs
> IO-APIC pin 0, 5, 10, 11, 15, 24, 25, 26, 27, 32, 33, 34 not connected.
> number of MP IRQ sources: 32.
> number of IO-APIC registers: 35.
> testing the IO APIC.......................
> .... register #00: 00000000
> ....... : physical APIC id: 00
> .... register #01: 00220011
> ....... : max redirection entries: 0022
> WARNING: unexpected IO-APIC, please mail
> to [EMAIL PROTECTED]
> ....... : IO APIC version: 0011
> .... register #02: 00000000
> ....... : arbitration: 00
> .... IRQ redirection table:
> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> 00 000 00 1 0 0 0 0 0 0 00
> 01 000 00 0 0 0 0 0 1 1 59
> 02 0FF 0F 0 0 0 0 0 1 1 51
> 03 000 00 0 0 0 0 0 1 1 61
> 04 000 00 0 0 0 0 0 1 1 69
> 05 000 00 1 0 0 0 0 0 0 00
> 06 000 00 0 0 0 0 0 1 1 71
> 07 000 00 0 0 0 0 0 1 1 79
> 08 000 00 0 0 0 0 0 1 1 81
> 09 0FF 0F 1 1 0 0 0 1 1 89
> 0a 000 00 1 0 0 0 0 0 0 00
> 0b 000 00 1 0 0 0 0 0 0 00
> 0c 000 00 0 0 0 0 0 1 1 91
> 0d 000 00 1 0 0 0 0 0 0 00
> 0e 000 00 0 0 0 0 0 1 1 99
> 0f 000 00 1 0 0 0 0 0 0 00
> 10 0FF 0F 1 1 0 1 0 1 1 A1
> 11 0FF 0F 1 1 0 1 0 1 1 A9
> 12 0FF 0F 1 1 0 1 0 1 1 B1
> 13 0FF 0F 1 1 0 1 0 1 1 B9
> 14 0FF 0F 1 1 0 1 0 1 1 C1
> 15 0FF 0F 1 1 0 1 0 1 1 C9
> 16 0FF 0F 1 1 0 1 0 1 1 D1
> 17 0FF 0F 1 1 0 1 0 1 1 D9
> 18 000 00 1 0 0 0 0 0 0 00
> 19 000 00 1 0 0 0 0 0 0 00
> 1a 000 00 1 0 0 0 0 0 0 00
> 1b 000 00 1 0 0 0 0 0 0 00
> 1c 0FF 0F 1 1 0 1 0 1 1 E1
> 1d 0FF 0F 1 1 0 1 0 1 1 E9
> 1e 0FF 0F 1 1 0 1 0 1 1 F1
> 1f 0FF 0F 1 1 0 1 0 1 1 F9
> 20 000 00 1 0 0 0 0 0 0 00
> 21 000 00 1 0 0 0 0 0 0 00
> 22 000 00 1 0 0 0 0 0 0 00
> IRQ to pin mappings:
> IRQ0 -> 2
> IRQ1 -> 1
> IRQ3 -> 3
> IRQ4 -> 4
> IRQ6 -> 6
> IRQ7 -> 7
> IRQ8 -> 8
> IRQ9 -> 9
> IRQ12 -> 12
> IRQ13 -> 13
> IRQ14 -> 14
> IRQ16 -> 16
> IRQ17 -> 17
> IRQ18 -> 18
> IRQ19 -> 19
> IRQ20 -> 20
> IRQ21 -> 21
> IRQ22 -> 22
> IRQ23 -> 23
> IRQ28 -> 28
> IRQ29 -> 29
> IRQ30 -> 30
> IRQ31 -> 31
> .................................... done.
> mtrr: your CPUs had inconsistent fixed MTRR settings
> mtrr: probably your BIOS does not setup all CPUs
> PCI: PCI BIOS revision 2.10 entry at 0xf0084
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> PCI->APIC IRQ transform: (B0,I6,P0) -> 31
> PCI->APIC IRQ transform: (B0,I6,P1) -> 30
> PCI->APIC IRQ transform: (B0,I7,P0) -> 29
> PCI: Assigning I/O space 5800-581f to device 00:a2
> PCI: Enabling I/O for device 00:a2
> PCI: using PPB(B0,I13,P0) to get irq 17
> PCI->APIC IRQ transform: (B1,I0,P0) -> 17
> PCI: Device 00:00 not found by BIOS
> PCI: Device 00:a0 not found by BIOS
> PCI: Device 00:a1 not found by BIOS
> PCI: Device 00:a2 not found by BIOS
> PCI: Device 00:a3 not found by BIOS
> Linux NET4.0 for Linux 2.2
> Based upon Swansea University Computer Society NET3.039
> NET4: Unix domain sockets 1.0 for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> Initializing RT netlink socket
> Starting kswapd v 1.5
> Detected PS/2 Mouse Port.
> Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> pty: 256 Unix98 ptys configured
> Real Time Clock Driver v1.09
> RAM disk driver initialized: 16 RAM disks of 4096K size
> PIIX4: IDE controller on PCI bus 00 dev a1
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xf100-0xf107, BIOS settings: hda:pio, hdb:pio
> hda: CD-224E, ATAPI CDROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: ATAPI 24X CD-ROM drive, 512kB Cache
> Uniform CDROM driver Revision: 2.54
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a National Semiconductor PC87306
> md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
> raid5: measuring checksumming speed
> raid5: using high-speed MMX checksum routine
> pII_mmx : 1189.863 MB/sec
> p5_mmx : 1161.288 MB/sec
> 8regs : 858.774 MB/sec
> 32regs : 616.839 MB/sec
> using fastest function: pII_mmx (1189.863 MB/sec)
> scsi : 0 hosts.
> scsi : detected total.
> md.c: sizeof(mdp_super_t) = 4096
> Partition check:
> RAMDISK: Compressed image found at block 0
> autodetecting RAID arrays
> autorun ...
> ... autorun DONE.
> VFS: Mounted root (ext2 filesystem).
> ncr53c8xx: at PCI bus 0, device 6, function 0
> ncr53c8xx: 53c876 detected
> ncr53c8xx: at PCI bus 0, device 6, function 1
> ncr53c8xx: 53c876 detected
> ncr53c876-0: rev=0x14, base=0xc6efcf00, io_port=0x2000, irq=31
> ncr53c876-0: NCR clock is 40037KHz, 40037KHz
> ncr53c876-0: ID 7, Fast-20, Parity Checking
> ncr53c876-0: on-chip RAM at 0xc6eff000
> ncr53c876-0: restart (scsi reset).
> ncr53c876-0: Downloading SCSI SCRIPTS.
> ncr53c876-1: rev=0x14, base=0xc6efce00, io_port=0x2400, irq=30
> ncr53c876-1: ID 7, Fast-20, Parity Checking
> ncr53c876-1: on-chip RAM at 0xc6efe000
> ncr53c876-1: restart (scsi reset).
> ncr53c876-1: Downloading SCSI SCRIPTS.
> scsi0 : ncr53c8xx - revision 3.1h
> scsi1 : ncr53c8xx - revision 3.1h
> scsi : 2 hosts.
> ncr53c876-1-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 15)
> Vendor: QUANTUM Model: DLT7000 Rev: 2255
> Type: Sequential-Access ANSI SCSI revision: 02
> Detected scsi tape st0 at scsi1, channel 0, id 6, lun 0
> Compaq SMART2 Driver (v 0.9.9)
> Found 1 controller(s)
> Finding drives on ida0 (SMART-221)
> ida/c0d0: blksz=512 nr_blks=53309280
> ida/c0d0: p1 p2 p3 p4 < p5 p6 p7 >
> autodetecting RAID arrays
> autorun ...
> ... autorun DONE.
> VFS: Mounted root (ext2 filesystem) readonly.
> change_root: old root has d_count=1
> Trying to unmount old root ... okay
> Freeing unused kernel memory: 68k freed
> Adding Swap: 514076k swap-space (priority -1)
> TLAN driver, v1.0, (C) 1997-8 Caldera, Inc.
> TLAN: eth0 irq=29 io=2c00, Compaq Netelligent Integrated 10/100 TX UTP,
> Rev. 16
> TLAN: eth0: Starting autonegotiation.
> Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
> nfsd_init: initialized fhcache, entries=256
> TLAN: eth0: Autonegotiation complete.
> TLAN: eth0: Link active.
>
> Using: vmlinuz-2.2.5-15smp with noapic:
> Linux version 2.2.5-15smp ([EMAIL PROTECTED]) (gcc version
> egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 SMP Mon Apr 19
> 22:43:28 EDT 1999
> Intel MultiProcessor Specification v1.4
> Virtual Wire compatibility mode.
> OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
> Processor #1 Pentium(tm) Pro APIC version 16
> Processor #0 Pentium(tm) Pro APIC version 16
> I/O APIC #8 Version 17 at 0xFEC00000.
> Processors: 2
> mapped APIC to ffffe000 (fee00000)
> mapped IOAPIC to ffffd000 (fec00000)
> Detected 498497508 Hz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 496.44 BogoMIPS
> Memory: 387220k/393216k available (1044k kernel code, 416k reserved,
> 4184k data, 68k init)
> VFS: Diskquotas version dquot_6.4.0 initialized
> Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.26 (19981001) Richard Gooch ([EMAIL PROTECTED])
> per-CPU timeslice cutoff: 100.09 usecs.
> CPU1: Intel 00/07 stepping 02
> calibrating APIC timer ...
> ..... CPU clock speed is 498.4903 MHz.
> ..... system bus clock speed is 99.6979 MHz.
> Booting processor 0 eip 2000
> Calibrating delay loop... 498.07 BogoMIPS
> OK.
> CPU0: Intel 00/07 stepping 02
> Total of 2 processors activated (994.51 BogoMIPS).
> mtrr: your CPUs had inconsistent fixed MTRR settings
> mtrr: probably your BIOS does not setup all CPUs
> PCI: PCI BIOS revision 2.10 entry at 0xf0084
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> PCI->APIC IRQ transform: (B0,I6,P0) -> 31
> PCI->APIC IRQ transform: (B0,I6,P1) -> 30
> PCI->APIC IRQ transform: (B0,I7,P0) -> 29
> PCI: Assigning I/O space 5800-581f to device 00:a2
> PCI: Enabling I/O for device 00:a2
> PCI: using PPB(B0,I13,P0) to get irq 17
> PCI->APIC IRQ transform: (B1,I0,P0) -> 17
> PCI: Device 00:00 not found by BIOS
> PCI: Device 00:a0 not found by BIOS
> PCI: Device 00:a1 not found by BIOS
> PCI: Device 00:a2 not found by BIOS
> PCI: Device 00:a3 not found by BIOS
> Linux NET4.0 for Linux 2.2
> Based upon Swansea University Computer Society NET3.039
> NET4: Unix domain sockets 1.0 for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> Initializing RT netlink socket
> Starting kswapd v 1.5
> Detected PS/2 Mouse Port.
> Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> pty: 256 Unix98 ptys configured
> Real Time Clock Driver v1.09
> RAM disk driver initialized: 16 RAM disks of 4096K size
> PIIX4: IDE controller on PCI bus 00 dev a1
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xf100-0xf107, BIOS settings: hda:pio, hdb:pio
> hda: CD-224E, ATAPI CDROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: ATAPI 24X CD-ROM drive, 512kB Cache
> Uniform CDROM driver Revision: 2.54
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a National Semiconductor PC87306
> md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
> raid5: measuring checksumming speed
> raid5: using high-speed MMX checksum routine
> pII_mmx : 1188.339 MB/sec
> p5_mmx : 1160.907 MB/sec
> 8regs : 858.774 MB/sec
> 32regs : 616.077 MB/sec
> using fastest function: pII_mmx (1188.339 MB/sec)
> scsi : 0 hosts.
> scsi : detected total.
> md.c: sizeof(mdp_super_t) = 4096
> Partition check:
> RAMDISK: Compressed image found at block 0
> autodetecting RAID arrays
> autorun ...
> ... autorun DONE.
> VFS: Mounted root (ext2 filesystem).
> Compaq SMART2 Driver (v 0.9.9)
> Found 1 controller(s)
> Finding drives on ida0 (SMART-221)
> ida/c0d0: blksz=512 nr_blks=53309280
> ida/c0d0: p1 p2 p3 p4 < p5 p6 p7 >
> autodetecting RAID arrays
> autorun ...
> ... autorun DONE.
> VFS: Mounted root (ext2 filesystem) readonly.
> change_root: old root has d_count=1
> Trying to unmount old root ... okay
> Freeing unused kernel memory: 68k freed
> Adding Swap: 514076k swap-space (priority -1)
> TLAN driver, v1.0, (C) 1997-8 Caldera, Inc.
> TLAN: eth0 irq=29 io=2c00, Compaq Netelligent Integrated 10/100 TX UTP,
> Rev. 16
> TLAN: eth0: Starting autonegotiation.
> Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
> nfsd_init: initialized fhcache, entries=256
> TLAN: eth0: Autonegotiation complete.
> TLAN: eth0: Link active.
>
>
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
