As you suggest in the kernel message here my logs
Because this system is running a cobol application, and it's very businnes
critical machine should I be worry this messages
Compaq proliant 3000
2X450 pentiumII
Smart2 raid controller
Thanks a lot for you help and greetings from Italy
Andrea
dmesg output:
Linux version 2.2.5 (root@zero9) (gcc version egcs-2.91.66 19990314
(egcs-1.1.2 release)) #5 SMP Tue Jul 6 15:31:31 MEST 1999
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 16
Processor #0 Pentium(tm) Pro APIC version 16
I/O APIC #8 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 448966615 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 447.28 BogoMIPS
Memory: 127776k/131072k available (1236k kernel code, 420k reserved, 1588k
data, 52k init)
VFS: Diskquotas version dquot_6.4.0 initialized
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.26 (19981001) Richard Gooch ([EMAIL PROTECTED])
per-CPU timeslice cutoff: 100.21 usecs.
CPU1: Intel Pentium II (Deschutes) stepping 02
calibrating APIC timer ...
..... CPU clock speed is 448.9737 MHz.
..... system bus clock speed is 99.7716 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 447.28 BogoMIPS
OK.
CPU0: Intel Pentium II (Deschutes) stepping 02
Total of 2 processors activated (894.57 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30,
31, 32, 33, 34 not connected.
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer as ExtINT... .. (found pin 0) ... works.
number of MP IRQ sources: 16.
number of IO-APIC registers: 35.
testing the IO APIC.......................
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 00220011
....... : max redirection entries: 0022
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 001 01 0 0 0 0 0 0 7 51
01 000 00 0 0 0 0 0 1 1 59
02 000 00 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 0FF 0F 1 1 0 1 0 1 1 71
06 000 00 0 0 0 0 0 1 1 79
07 000 00 0 0 0 0 0 1 1 81
08 000 00 0 0 0 0 0 1 1 89
09 0FF 0F 1 1 0 1 0 1 1 91
0a 0FF 0F 1 1 0 1 0 1 1 99
0b 0FF 0F 1 1 0 1 0 1 1 A1
0c 000 00 0 0 0 0 0 1 1 A9
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 B1
0f 0FF 0F 1 1 0 1 0 1 1 B9
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
18 000 00 1 0 0 0 0 0 0 00
19 000 00 1 0 0 0 0 0 0 00
1a 000 00 1 0 0 0 0 0 0 00
1b 000 00 1 0 0 0 0 0 0 00
1c 000 00 1 0 0 0 0 0 0 00
1d 000 00 1 0 0 0 0 0 0 00
1e 000 00 1 0 0 0 0 0 0 00
1f 000 00 1 0 0 0 0 0 0 00
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 5
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 10
IRQ11 -> 11
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
.................................... done.
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xf0080
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered primary peer bus 01
PCI: Device 00:00 not found by BIOS
PCI: Device 00:01 not found by BIOS
PCI: Device 00:78 not found by BIOS
PCI: Device 00:88 not found by BIOS
PCI: Device 00:89 not found by BIOS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 20480K size
hdb: COMPAQ CR-589, ATAPI CDROM drive
ide0: unexpected interrupt, status=0x00, count=1
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdb: ATAPI 32X CD-ROM drive, 512kB Cache
Uniform CDROM driver Revision: 2.54
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
scsi : 0 hosts.
scsi : detected total.
Compaq SMART2 Driver (v 0.9.9)
Found 1 controller(s)
Finding drives on ida0 (SMART-3200)
ida/c0d0: blksz=512 nr_blks=8380320
ida/c0d1: blksz=512 nr_blks=35536800
Partition check:
ida/c0d0: p1 < p5 p6 > p3
ida/c0d1: p1
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 52k freed
Adding Swap: 265180k swap-space (priority -1)
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
3c59x.c:v0.99H 11/17/98 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c905 Boomerang 100baseTx at 0x3800, 00:60:08:95:67:61, IRQ 5
8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
Media override to transceiver type 0 (10baseT).
Enabling bus-master transmits and whole-frame receives.
eth1: 3Com 3c905B Cyclone 100baseTx at 0x3880, 00:10:4b:6b:21:ea, IRQ 9
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 786d.
MII transceiver found at address 0, status 786d.
Enabling bus-master transmits and whole-frame receives.
cat: /etc/procinfo: No such file or directory
zero9:~ # cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : 2
cpu MHz : 448.966615
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx osfxsr
bogomips : 447.28
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : 2
cpu MHz : 448.966615
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx osfxsr
bogomips : 447.28
zero9:~ # cat /proc/interrupts
CPU0 CPU1
0: 300494 0 XT-PIC timer
1: 2769 2708 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
5: 0 0 IO-APIC-level eth0
8: 1 1 IO-APIC-edge rtc
9: 609 613 IO-APIC-level eth1
12: 13309 13304 IO-APIC-edge PS/2 Mouse
13: 1 0 XT-PIC fpu
14: 4 2 IO-APIC-edge ide0
15: 237846 238466 IO-APIC-level ida0
NMI: 0
ERR: 0
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
