have you loaded up smartstart and specified the os???? if you haven't, do so
and select "unixware 7". lemme know if it works....
The opinions expressed herein are the authors own, and do not
necessarily represent the opinions of any sane being.
Chris Cull
Compaq Computer Corp.
Americas Communications, Manager
-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GCS/CC/IT d- s: a C++++$ UL++>$S P+ L++ E? W+ N+ o? K? w--- O M-- V--
PS+ PE+ Y+ PGP t++@ 5+ X R* tv b+++ DI+ D++ G++ e* h---- r+++ y++++
-----END GEEK CODE BLOCK-----
-----Original Message-----
From: Stuart Hardy [mailto:[EMAIL PROTECTED]]
Sent: Monday, November 01, 1999 3:20 PM
To: [EMAIL PROTECTED]
Subject: SMP on a Beowulf cluster
Hello,
I have four Compaq Proliant 5500 quad PPro boxes that I am using to build a
Beowulf cluster. They each have 4 512K PPro 200s installed.
The cluster part is working fine, all machines see each other etc. When I
do a cat /proc/cpuinfo, the results only show one processor, so I am
assuming the problem is with the SMP.
I ran make xconfig to turn SMP on and set the CPU type to 686. I then did
make dep , make clean, make bzImage etc. But, I still show only processor.
Any help would be appreciated.
All the best,
Stuart.
-
Linux SMP list: FIRST see FAQ at
http://www.irisa.fr/prive/dmentre/smp-howto/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/dmentre/smp-howto/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
