sorry - probably you already answered, but our mail-server dropped several
mails.
I just installed a IBM Netfinity 5500 with 2 Pentium III and IBM Raid
Controller.
Now I see a WARNING: MP table....
Do i have to make a BIOS update?
Do i have to update the RAID-Controller?
Is it safe to Compile the Kernel as a Pentium PRO AND SMP?
This system sould get as stable as possible...
Thanx a lot
Sven
This is DMESG:
******* BEGIN DMESG *******
Linux version 2.2.13-SMP (root@tux) (gcc version egcs-2.91.66
19990314/Linux (egcs-1.1.2 release)) #2 SMP Wed Feb 16 15:23:41 CET 2000
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: IBM ENSW Product ID: Kiowa SMP APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 17
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #14 Version 17 at 0xFEC00000.
Processors: 2
WARNING: MP table in the EBDA can be UNSAFE, contact
[EMAIL PROTECTED] if you experience SMP problems!
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 497790442 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 496.44 BogoMIPS
Memory: 517080k/524224k available (1132k kernel code, 428k reserved, 5516k
data, 68k init, 0k bigmem)
DENTRY hash table entries: 65536 (order: 7, 524288 bytes)
Buffer-cache hash table entries: 524288 (order: 9, 2097152 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
VFS: Diskquotas version dquot_6.4.0 initialized
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
per-CPU timeslice cutoff: 100.15 usecs.
CPU1: Intel Pentium III (Katmai) stepping 03
calibrating APIC timer ...
..... CPU clock speed is 497.7937 MHz.
..... system bus clock speed is 99.5584 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 496.44 BogoMIPS
OK.
CPU0: Intel Pentium III (Katmai) stepping 03
Total of 2 processors activated (992.87 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 15, 20, 21, 22, 23 not connected.
number of MP IRQ sources: 32.
number of IO-APIC registers: 24.
testing the IO APIC.......................
.... register #00: 0E000000
....... : physical APIC id: 0E
.... register #01: 00170011
....... : max redirection entries: 0017
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 0 0 0 0 0 1 1 71
06 000 00 0 0 0 0 0 1 1 79
07 000 00 0 0 0 0 0 1 1 81
08 000 00 0 0 0 0 0 1 1 89
09 0FF 0F 1 1 0 0 0 1 1 91
0a 0FF 0F 1 1 0 0 0 1 1 99
0b 0FF 0F 1 1 0 0 0 1 1 A1
0c 000 00 0 0 0 0 0 1 1 A9
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 B1
0f 000 00 1 0 0 0 0 0 0 00
10 0FF 0F 1 1 0 0 0 1 1 B9
11 0FF 0F 1 1 0 0 0 1 1 C1
12 0FF 0F 1 1 0 0 0 1 1 C9
13 0FF 0F 1 1 0 0 0 1 1 D1
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 5
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 10
IRQ11 -> 11
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ16 -> 16
IRQ17 -> 17
IRQ18 -> 18
IRQ19 -> 19
.................................... done.
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xfd5ec
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI->APIC IRQ transform: (B0,I3,P0) -> 11
PCI->APIC IRQ transform: (B0,I14,P0) -> 10
PCI->APIC IRQ transform: (B0,I15,P0) -> 9
PCI->APIC IRQ transform: (B0,I19,P3) -> 10
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
Uniform Multi-Platform E-IDE driver Revision: 6.20
PIIX4: IDE controller on PCI bus 00 dev 99
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
hda: CRD-8322B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Uniform CDROM driver Revision: 2.56
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
scsi0 : IBM PCI ServeRAID 1.00.00 <ServeRAID on motherboard>
scsi : 1 host.
Vendor: IBM Model: SERVERAID Rev: 1.0
Type: Direct-Access ANSI SCSI revision: 01
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: IBM Model: SERVERAID Rev: 1.0
Type: Direct-Access ANSI SCSI revision: 01
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Vendor: IBM Model: SERVERAID Rev: 1.0
Type: Processor ANSI SCSI revision: 01
Vendor: SEAGATE Model: DAT 06240-XXX Rev: 8040
Type: Sequential-Access ANSI SCSI revision: 03
Detected scsi tape st0 at scsi0, channel 1, id 6, lun 0
scsi : detected 1 SCSI tape 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 408576 [199 MB] [0.2 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 70549504 [34448 MB]
[34.4 GB]
pcnet32.c: PCI bios is present, checking for devices...
Found PCnet/PCI at 0x2180, irq 10.
eth0: PCnet/FAST 79C971 at 0x2180, 00 06 29 38 9b 3f
tx_start_pt(0x0400): 64 bytes, BCR18(9861):BurstWrEn BurstRdEn
NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x0800, assigned IRQ 10.
pcnet32.c:v1.25kf 26.9.1999 [EMAIL PROTECTED]
Partition check:
sda: sda1
sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freed
Adding Swap: 512024k swap-space (priority -1)
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
cdrom: open failed.
VFS: Disk change detected on device ide0(3,0)
parport0: PC-style at 0x378 [SPP]
parport0: no IEEE-1284 device present.
lp0: using parport0 (polling).
st0: Incorrect block size.
VFS: Disk change detected on device ide0(3,0)
ISO 9660 Extensions: RRIP_1991A
VFS: Disk change detected on device ide0(3,0)
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: RRIP_1991A
VFS: Disk change detected on device ide0(3,0)
ISO 9660 Extensions: RRIP_1991A
******* END DMESG *******
******* BEGIN /proc/cpuinfo *******
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 497.790442
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov
pat pse36 mmx osfxsr kni
bogomips : 496.44
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 497.790442
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov
pat pse36 mmx osfxsr kni
bogomips : 496.44
******* END /proc/cpuinfo *******
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/dmentre/smp-howto/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
