On Thu, 11 May 2000, Alan Cox wrote:
> > ENABLING IO-APIC IRQs
> > no explicit IRQ entries, using default mptable
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > Unable to handle kernel paging request at virtual address ffffd000
> > current->tss.cr3 = 00101000,%cr3 = 00101000
[...]
> Q1. Does it happen if you boot it with 'noapic'
> Q2. Can you get me the call trace values
>
> The trace looks to me like the intergraph has something unusual in its MP
> setup that we don't handle right
The marked line suggests a default MP configuration is used (i.e. one
specified in an MP floating pointer as opposed to an MP-table).
Unfortunately, 2.2 series kernels do not print which default MP
configuration is used. Addtionally these kernels do not handle some of
such configurations particularly well. I would recommend checking
2.3.99-pre6 on this machine, too.
--
+ Maciej W. Rozycki, Technical University of Gdansk, Poland +
+--------------------------------------------------------------+
+ e-mail: [EMAIL PROTECTED], PGP key available +
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/dmentre/smp-howto/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
