Hi,
    I'm actually running SMP on linux RedHat with kernel 2.3.99-pre9.
And i'm getting some errors like "ERROR on CPU|0 ACPI, this error should
never happen".  I can give you full detail on this error if needed.  Is
it a problem with my board who can be in the blacklist or is it a kernel
problem ?

This is a cat of interrupts in proc dir

           CPU0       CPU1
  0:   12595283   12294547    IO-APIC-edge  timer
  1:          5          5                  IO-APIC-edge  keyboard
  2:          0          0                  XT-PIC  cascade
  9:          0          0                  IO-APIC-edge  acpi
 10:    3525795    3524358     IO-APIC-level  eth0
 11:      12518      16685         IO-APIC-level  ide2, ide3
 12:          0          0                 IO-APIC-level  PS/2 Mouse
 13:          1          0                 XT-PIC  fpu
 14:    5778534    5757557     IO-APIC-edge  ide0
 15:       3620       2621           IO-APIC-edge  ide1
NMI:   24889752   24889752
LOC:   24889709   24889733
ERR:          9        <-----  It's not normal

Here, it's a cat of pci

PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
(rev 3).
      Master Capable.  Latency=32.
      Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
  Bus  0, device   1, function  0:
    PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev
3).
      Master Capable.  Latency=64.  Min Gnt=128.
  Bus  0, device   7, function  0:
    ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 2).
  Bus  0, device   7, function  1:
    IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 1).
      Master Capable.  Latency=32.
      I/O at 0xf000 [0xf00f].
  Bus  0, device   7, function  2:
    USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 1).
      IRQ 12.
      Master Capable.  Latency=32.
      I/O at 0xa000 [0xa01f].
  Bus  0, device   7, function  3:
    Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 2).
  Bus  0, device  13, function  0:
    Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
(rev 0).
      IRQ 10.
      I/O at 0xa400 [0xa41f].
  Bus  0, device  15, function  0:
    VGA compatible controller: ATI Technologies Inc 3D Rage I/II 215GT
[Mach64 GT] (rev 65).
      Master Capable.  Latency=32.  Min Gnt=8.
      Non-prefetchable 32 bit memory at 0xe4000000 [0xe4ffffff].
      I/O at 0xa800 [0xa8ff].
      Non-prefetchable 32 bit memory at 0xe7000000 [0xe7000fff].
  Bus  0, device  19, function  0:
    Unknown mass storage controller: Triones Technologies, Inc. HPT366
(rev 1).
      IRQ 11.
      Master Capable.  Latency=120.  Min Gnt=8.Max Lat=8.
      I/O at 0xac00 [0xac07].
      I/O at 0xb000 [0xb003].
      I/O at 0xb400 [0xb4ff].
  Bus  0, device  19, function  1:
    Unknown mass storage controller: Triones Technologies, Inc. HPT366
(#2) (rev 1).
      IRQ 11.
      Master Capable.  Latency=120.  Min Gnt=8.Max Lat=8.
      I/O at 0xb800 [0xb807].
      I/O at 0xbc00 [0xbc03].
      I/O at 0xc000 [0xc0ff].

Have a nice day, I wish I'll get some feedback on that.

--

Francois Beaudoin
junior systems administrator, up2 technologies
[EMAIL PROTECTED]


-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/dmentre/smp-howto/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]

Reply via email to