Yada kurtulabilirmi?
Merhabalar,
Bir arkadaşım 30GB kapasiteli SanDisk marka USB çubuğunu bir
şekilde "Read-Only" haline getirmiş. Bunun nasıl olduğuna
dair bir bilgisi yok. Benden formatlamamı istedi. Fakat ne
yaptımsa diske yazamadım. Aşağıda kullandığım komutların bir
özeti var.
Acaba önerisi olan varmı?
Çok teşekkürler.
Zeki
---------------------------------------------------------------------------------------------------------------------------------
root@kitaplik3:~# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/sdc1 vfat 30G 29G 1.5G 96%
/media/zeki/8AEA-A806
---------------------------------------------------------------------------------------------------------------------------------
zeki@kitaplik3:~$ sudo mount /dev/sdc1 /mnt/usbstick/
mount: /dev/sdc1 is write-protected, mounting read-only
---------------------------------------------------------------------------------------------------------------------------------
root@kitaplik3:~# dosfsck -a /dev/sdc1
fsck.fat 3.0.27 (2014-11-12)
open: Read-only file system
---------------------------------------------------------------------------------------------------------------------------------
root@kitaplik3:~# dosfsck -b /dev/sdc1
fsck.fat 3.0.27 (2014-11-12)
0x41: Dirty bit is set. Fs was not properly unmounted and
some data may be corrupt.
Automatically removing dirty bit.
Leaving filesystem unchanged.
---------------------------------------------------------------------------------------------------------------------------------
root@kitaplik3:~# mkfs.vfat /dev/sdc1
mkfs.fat 3.0.27 (2014-11-12)
mkfs.vfat: unable to open /dev/sdc1: Read-only file system
---------------------------------------------------------------------------------------------------------------------------------
root@kitaplik3:~# mount -t vfat -o uid=500,gid=500,umask=033
/dev/sdc1 /mnt/usbstick/
mount: /dev/sdc1 is write-protected, mounting read-only
---------------------------------------------------------------------------------------------------------------------------------
root@kitaplik3:~# fsck -n /dev/sdc1
fsck from util-linux 2.25.2
fsck.fat 3.0.27 (2014-11-12)
0x41: Dirty bit is set. Fs was not properly unmounted and
some data may be corrupt.
Automatically removing dirty bit.
Free cluster summary wrong (466464 vs. really 95924)
Auto-correcting.
Leaving filesystem unchanged.
/dev/sdc1: 4965 files, 1857133/1953057 clusters
---------------------------------------------------------------------------------------------------------------------------------
root@kitaplik3:~# hdparm -r0 /dev/sdc
/dev/sdc:
setting readonly to 0 (off)
readonly = 0 (off)
---------------------------------------------------------------------------------------------------------------------------------
root@kitaplik3:~# mkfs.vfat /dev/sdc1
mkfs.fat 3.0.27 (2014-11-12)
mkfs.vfat: unable to open /dev/sdc1: Read-only file system
---------------------------------------------------------------------------------------------------------------------------------
root@kitaplik3:~# fdisk /dev/sdc
Welcome to fdisk (util-linux 2.25.2).
Changes will remain in memory only, until you decide to
write them.
Be careful before using the write command.
fdisk: cannot open /dev/sdc: Read-only file system
---------------------------------------------------------------------------------------------------------------------------------
root@kitaplik3:~# dd if=/dev/zero of=/dev/sdc bs=1M
dd: failed to open ‘/dev/sdc’: Read-only file system
---------------------------------------------------------------------------------------------------------------------------------
--
Zeki Çelikbaş
Kütüphaneci
İTÜ Uçak ve Uzay Bilimleri Fakültesi
34469 Maslak İstanbul
+90 212 2853101-131 celik...@itu.edu.tr
