linux-spi  

Messages by Thread

• • Re: [PATCH v1 0/2] spi: fsl-dspi: better approximation for baudrate Aaron Brice
  • Re: [PATCH v1 0/2] spi: fsl-dspi: better approximation for baudrate Andy Shevchenko
  • Re: [PATCH v1 0/2] spi: fsl-dspi: better approximation for baudrate Aaron Brice
  • Re: [PATCH v1 0/2] spi: fsl-dspi: better approximation for baudrate Mark Brown
• [PATCH] spi: spi-bfin5xx: Initialize cr_width in bfin_spi_pump_transfers() Chen Gang
  • Re: [PATCH] spi: spi-bfin5xx: Initialize cr_width in bfin_spi_pump_transfers() Mark Brown
• [PATCH] spi: imx: read back the RX/TX watermark levels earlier Lucas Stach
  • Re: [PATCH] spi: imx: read back the RX/TX watermark levels earlier Mark Brown
  • Re: [PATCH] spi: imx: read back the RX/TX watermark levels earlier Mark Brown
• [PATCH v5] spi: Add SPI driver for Mikrotik RB4xx series boards Bert Vermeulen
• Using gpio_keys with regmapped gpio? Thor Thayer
  • Re: Using gpio_keys with regmapped gpio? Mark Brown
  • Re: Using gpio_keys with regmapped gpio? Dmitry Torokhov
  • Re: Using gpio_keys with regmapped gpio? Thor Thayer
  • Re: Using gpio_keys with regmapped gpio? Dmitry Torokhov
  • Re: Using gpio_keys with regmapped gpio? Dmitry Torokhov
  • Re: Using gpio_keys with regmapped gpio? Geert Uytterhoeven
• [PATCH v4] spi: Add SPI driver for Mikrotik RB4xx series boards Bert Vermeulen
  • Re: [PATCH v4] spi: Add SPI driver for Mikrotik RB4xx series boards Andy Shevchenko
  • Re: [PATCH v4] spi: Add SPI driver for Mikrotik RB4xx series boards Jonas Gorski
• [PATCH v3] spi: Add SPI driver for Mikrotik RB4xx series boards Bert Vermeulen
  • Re: [PATCH v3] spi: Add SPI driver for Mikrotik RB4xx series boards Andy Shevchenko
• [PATCH] spi: bitbang: only toggle bitchanges Michael Grzeschik
  • Re: [PATCH] spi: bitbang: only toggle bitchanges Mark Brown
  • [PATCH v2] spi: bitbang: only toggle bitchanges Michael Grzeschik
  • Re: [PATCH v2] spi: bitbang: only toggle bitchanges Mark Brown
  • Re: [PATCH v2] spi: bitbang: only toggle bitchanges Jonas Gorski
  • Re: [PATCH v2] spi: bitbang: only toggle bitchanges Michael Grzeschik
  • Re: [PATCH v2] spi: bitbang: only toggle bitchanges Mark Brown
  • [PATCH v3] spi: bitbang: only toggle bitchanges Michael Grzeschik
  • Re: [PATCH v3] spi: bitbang: only toggle bitchanges Mark Brown
  • Re: [PATCH v3] spi: bitbang: only toggle bitchanges Marc Kleine-Budde
  • Re: [PATCH v3] spi: bitbang: only toggle bitchanges Mark Brown
• [PATCH v2 1/1] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div() Andy Shevchenko
  • Re: [PATCH v2 1/1] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div() Dan Carpenter
  • Re: [PATCH v2 1/1] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div() Mark Brown
• spi-altera in mainline Pelle Nilsson
• Re: [PATCH v3 1/1] spi: Using Trigger number to transmit/receive data Mark Brown
  • Re: [PATCH v3 1/1] spi: Using Trigger number to transmit/receive data Cao Minh Hiep
  • Re: [PATCH v3 1/1] spi: Using Trigger number to transmit/receive data Geert Uytterhoeven
  • Re: [PATCH v3 1/1] spi: Using Trigger number to transmit/receive data Cao Minh Hiep
• [PATCH v2 0/1] spi: Add driver for Routerboard RB4xx boards Bert Vermeulen
  • [PATCH v2 1/1] spi: Add SPI driver for Mikrotik RB4xx series boards Bert Vermeulen
  • Re: [PATCH v2 1/1] spi: Add SPI driver for Mikrotik RB4xx series boards Andy Shevchenko
  • Re: [PATCH v2 0/1] spi: Add driver for Routerboard RB4xx boards Mark Brown
  • Re: [PATCH v2 0/1] spi: Add driver for Routerboard RB4xx boards Ralf Baechle
• [PATCH v2 0/2] spi: fsl-dspi (vf610) clock fixes Aaron Brice
  • [PATCH v2 1/2] spi: fsl-dspi: Fix clock rate scale values Aaron Brice
  • Re: [PATCH v2 1/2] spi: fsl-dspi: Fix clock rate scale values Mark Brown
  • [PATCH v2 2/2] spi: fsl-dspi: Add ~50ns delay between cs and sck Aaron Brice
  • Re: [PATCH v2 2/2] spi: fsl-dspi: Add ~50ns delay between cs and sck Stefan Agner
  • Re: [PATCH v2 2/2] spi: fsl-dspi: Add ~50ns delay between cs and sck Aaron Brice
• [patch] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div() Dan Carpenter
  • Re: [patch] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div() Andy Shevchenko
  • Re: [patch] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div() Mark Brown
• [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Martin Sperl
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Mark Brown
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Stephen Warren
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Mark Brown
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Stephen Warren
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Mark Brown
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Martin Sperl
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Martin Sperl
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Stephen Warren
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Mark Brown
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Martin Sperl
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Martin Sperl
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Mark Brown
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Martin Sperl
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Mark Brown
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Martin Sperl
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Stephen Warren
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Martin Sperl
  • Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to Martin Sperl
• [PATCH 2/6] spi: bcm2835: fix code formatting issue Martin Sperl
  • Re: [PATCH 2/6] spi: bcm2835: fix code formatting issue Mark Brown
• [PATCH 4/6] spi: bcm2835: warn about native-chip-selects being used Martin Sperl
  • Re: [PATCH 4/6] spi: bcm2835: warn about native-chip-selects being used Mark Brown
  • Re: [PATCH 4/6] spi: bcm2835: warn about native-chip-selects being used Martin Sperl
  • Re: [PATCH 4/6] spi: bcm2835: warn about native-chip-selects being used Stephen Warren
  • Re: [PATCH 4/6] spi: bcm2835: warn about native-chip-selects being used Stephen Warren
• [PATCH/RFC 6/6] spi: bcm2835: set gpio-cs to high state prior to any Martin Sperl
  • Re: [PATCH/RFC 6/6] spi: bcm2835: set gpio-cs to high state prior to any Mark Brown
  • Re: [PATCH/RFC 6/6] spi: bcm2835: set gpio-cs to high state prior to any Martin Sperl
  • Re: [PATCH/RFC 6/6] spi: bcm2835: set gpio-cs to high state prior to any Stephen Warren
  • Re: [PATCH/RFC 6/6] spi: bcm2835: set gpio-cs to high state prior to any Martin Sperl
• [PATCH 5/6] spi: bcm2835: add polling mode for transfers below 30us Martin Sperl
  • Re: [PATCH 5/6] spi: bcm2835: add polling mode for transfers below 30us Mark Brown
  • Re: [PATCH 5/6] spi: bcm2835: add polling mode for transfers below 30us Stephen Warren
  • Re: [PATCH 5/6] spi: bcm2835: add polling mode for transfers below 30us Martin Sperl
  • Re: [PATCH 5/6] spi: bcm2835: add polling mode for transfers below 30us Stephen Warren
• [PATCH 1/6] spi: bcm2835: remove dependency on handle_err which is Martin Sperl
  • Re: [PATCH 1/6] spi: bcm2835: remove dependency on handle_err which is Mark Brown
  • Re: [PATCH 1/6] spi: bcm2835: remove dependency on handle_err which is Martin Sperl
  • Re: [PATCH 1/6] spi: bcm2835: remove dependency on handle_err which is Mark Brown
  • Re: [PATCH 1/6] spi: bcm2835: remove dependency on handle_err which is Stephen Warren
• [PATCH 0/6] spi: bcm2835: collection of driver-optimizations Martin Sperl
• spi: bcm2835: strange observation with cs_gpios low after reboot Martin Sperl
• [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev" Mark Brown
  • Re: [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev" Martin Sperl
  • Re: [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev" Geert Uytterhoeven
  • Re: [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev" Geert Uytterhoeven
  • Re: [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev" Mark Brown
  • Re: [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev" Martin Sperl
  • Re: [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev" Mark Brown
  • Re: [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev" Martin Sperl
  • Re: [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev" Mark Brown
• [PATCH 0/2] spi: fsl-dspi (vf610) clock fixes Aaron Brice
  • [PATCH 1/2] spi: fsl-dspi: Fix clock rate scale values Aaron Brice
  • Re: [PATCH 1/2] spi: fsl-dspi: Fix clock rate scale values Mark Brown
  • [PATCH 2/2] spi: fsl-dspi: Add ~50ns delay between cs and sck Aaron Brice
• Re: [PATCH] spi: xilinx: Use standard num-cs binding Michal Simek
  • Re: [PATCH] spi: xilinx: Use standard num-cs binding Mark Brown
  • Re: [PATCH] spi: xilinx: Use standard num-cs binding Michal Simek
  • Re: [PATCH] spi: xilinx: Use standard num-cs binding Mark Brown
  • Re: [PATCH] spi: xilinx: Use standard num-cs binding Michal Simek
  • Re: [PATCH] spi: xilinx: Use standard num-cs binding Mark Brown
  • Re: [PATCH] spi: xilinx: Use standard num-cs binding Michal Simek
  • Re: [PATCH] spi: xilinx: Use standard num-cs binding Mark Brown
• [PATCH 1/2] spi/rockchip: Round up clock rate divisor to err on the safe side Julius Werner
  • [PATCH 2/2] spi/rockchip: Add device tree property to configure Rx Sample Delay Julius Werner
  • Re: [PATCH 2/2] spi/rockchip: Add device tree property to configure Rx Sample Delay Doug Anderson
  • Re: [PATCH 1/2] spi/rockchip: Round up clock rate divisor to err on the safe side Doug Anderson
  • Re: [PATCH 1/2] spi/rockchip: Round up clock rate divisor to err on the safe side Mark Brown
• [RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO Ben Dooks
  • Re: [RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO Hans-Christian Egtvedt
  • Re: [RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO Mark Brown
  • Re: [RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO Nicolas Ferre
  • Re: [RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO Mark Brown
  • Re: [RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO Mark Brown
• [RESEND PATCH] spi: of: do explicitly request modules for of-registered devices Dmitry Torokhov
  • Re: [RESEND PATCH] spi: of: do explicitly request modules for of-registered devices Mark Brown
• [PATCH 1/1] spi: dw: fix crash on setup stage Andy Shevchenko
  • Re: [PATCH 1/1] spi: dw: fix crash on setup stage Mark Brown
• [PATCH v2 1/1] spi: pxa2xx: replace ugly table by approximation Andy Shevchenko
  • Re: [PATCH v2 1/1] spi: pxa2xx: replace ugly table by approximation Mark Brown
• Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select Martin Sperl
  • Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select Mark Brown
  • Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select Martin Sperl
  • Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select Mark Brown
  • Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select Martin Sperl
  • Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select Mark Brown
  • Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select Martin Sperl
  • Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select Mark Brown
  • [PATCH] SPI: bcm2835: move to the transfer_one driver model Martin Sperl
  • Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Mark Brown
  • Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Stephen Warren
  • Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Martin Sperl
  • Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Mark Brown
  • Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Stephen Warren
  • Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Martin Sperl
  • Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Stephen Warren
  • Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Martin Sperl
  • Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Martin Sperl
  • Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Martin Sperl
  • Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Stephen Warren
  • Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Martin Sperl
  • Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model Mark Brown
• [GIT PULL] spi fixes for v4.0 Mark Brown
• [PATCH v1 0/2] spi: pxa2xx: allow to set mostly any baudrate for Quark case Andy Shevchenko
  • [PATCH v1 1/2] spi: pxa2xx: shift clk_div in one place Andy Shevchenko
  • Re: [PATCH v1 1/2] spi: pxa2xx: shift clk_div in one place Mark Brown
  • [PATCH v1 2/2] spi: pxa2xx: replace ugly table by approximation Andy Shevchenko
  • Re: [PATCH v1 2/2] spi: pxa2xx: replace ugly table by approximation Mark Brown
  • Re: [PATCH v1 2/2] spi: pxa2xx: replace ugly table by approximation Andy Shevchenko
  • Re: [PATCH v1 2/2] spi: pxa2xx: replace ugly table by approximation Mark Brown
  • Re: [PATCH v1 2/2] spi: pxa2xx: replace ugly table by approximation Andy Shevchenko
  • Re: [PATCH v1 0/2] spi: pxa2xx: allow to set mostly any baudrate for Quark case Mark Brown
  • Re: [PATCH v1 0/2] spi: pxa2xx: allow to set mostly any baudrate for Quark case Andy Shevchenko
  • Re: [PATCH v1 0/2] spi: pxa2xx: allow to set mostly any baudrate for Quark case Mark Brown
• Re: [PATCH] SPI: BCM2835: enable support of 3-wire mode Mark Brown
• [PATCH] spi: spidev: fix possible arithmetic overflow for multi-transfer message Ian Abbott
  • Re: [PATCH] spi: spidev: fix possible arithmetic overflow for multi-transfer message Mark Brown
  • Re: [PATCH] spi: spidev: fix possible arithmetic overflow for multi-transfer message Ian Abbott
  • Re: [PATCH] spi: spidev: fix possible arithmetic overflow for multi-transfer message Mark Brown
• [PATCH] spi: bcm2835: fill/drain SPI-fifo as much as possible during interrupt Martin Sperl
  • Re: [PATCH] spi: bcm2835: fill/drain SPI-fifo as much as possible during interrupt Mark Brown
• re: spi: spidev: only use up TX/RX bounce buffer space when needed Dan Carpenter
  • Re: spi: spidev: only use up TX/RX bounce buffer space when needed Ian Abbott
• [PATCH 1/2] spi: pxa2xx: Remove needless includes Jarkko Nikula
  • [PATCH 2/2] spi: omap-uwire: Remove needless include asm/irq.h Jarkko Nikula
  • Re: [PATCH 1/2] spi: pxa2xx: Remove needless includes Mark Brown
• Re: [PATCH 09/13] spi: atmel: use endian agnostic IO Mark Brown
• Re: [PATCH v2] spi: Ensure that CS line is in non-active state after spi_setup() Ivan T. Ivanov
  • Re: [PATCH v2] spi: Ensure that CS line is in non-active state after spi_setup() Mark Brown
• Re: [PATCH] SPI: BCM2835: clock divider can be a multiple of 2 Noralf Trønnes
  • Re: [PATCH] SPI: BCM2835: clock divider can be a multiple of 2 Mark Brown
• Re: [PATCH] SPI: BCM2835: fix all checkpath --strict messages Mark Brown
  • Re: [PATCH] SPI: BCM2835: fix all checkpath --strict messages Mark Brown
  • [PATCH V2] SPI: BCM2835: fix all checkpath --strict messages Martin Sperl
  • Re: [PATCH V2] SPI: BCM2835: fix all checkpath --strict messages Mark Brown
• Re: [PATCH 2/2] spi: Add driver for the CPLD chip on Mikrotik RB4xx boards Mark Brown
  • Re: [PATCH 2/2] spi: Add driver for the CPLD chip on Mikrotik RB4xx boards Andy Shevchenko
• Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi Peter Ujfalusi
  • Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi Peter Ujfalusi
  • Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi Mark Brown
• Re: [PATCH 1/2] spi: Add SPI driver for Mikrotik RB4xx series boards Mark Brown
  • Re: [PATCH 1/2] spi: Add SPI driver for Mikrotik RB4xx series boards Bert Vermeulen
  • Re: [PATCH 1/2] spi: Add SPI driver for Mikrotik RB4xx series boards Mark Brown
  • Re: [PATCH 1/2] spi: Add SPI driver for Mikrotik RB4xx series boards Andy Shevchenko

• Later messages