Hi, Arti! Of course I've tried your overlay. At the moment I have 14 pairs of lines in dmesg (with some my extra output): sun4i_drv_add_endpoints: Adding component /vga-connector sun4i_drv_traverse_endpoints: No output to bind on port, 1, node name: vga-connector, node full name: vga-connector
Searching "No output to bind on port" gives few results (all of them are in Chinese and give unrelated answers). By the way. I have another question: How should I set the rest of graphics output? Should I set cmdline or another OF/DT nodes to set kernel output console to exact video output? If I knew how to set up console output properly, I could start with setting up HDMI (which, I suppose, is much easier). And after setting up HDMI switch back to VGA. On Sunday, 1 May 2022 at 17:03:28 UTC+3 arti...@gmail.com wrote: > On R, 2022-04-29 at 03:58 -0700, Daft Soft wrote: > > Sorry, forgot to mention. My DT settings are: > It maynot help but some time ago I used this Armbian device tree > overlay to get VGA working on A20 Cubietruck > https://gist.github.com/artizirk/636e3fe9320bb0f6af9c419a79157346 > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/43206a28-2a69-43d1-bc94-8d48478cde10n%40googlegroups.com.
