Note the boot procedure of Allwinner CPUS: 1. SD Card0 also known as MMC0
2. Internal NAND flash also known as NAND 3. SD Card2 also known as MMC2 4. SPI connected NOR flash also known as SPI 5. If all fails, FEL/USB Boot mode is executed from 0xffff0020 Maybe your emmc isn’t on the right channel? regards Von: linux-sunxi@googlegroups.com [mailto:linux-sunxi@googlegroups.com] Im Auftrag von Rajesh Mallah Gesendet: Sonntag, 19. Jänner 2014 16:20 An: linux-sunxi@googlegroups.com Betreff: Re: [linux-sunxi] Re: uboot for Mele M3 A20 Dear Oliver , the board boots fine using the uboot compiled for a20-olinuxino_micro and placed on the sdcard. I am not able boot using same uboot on the internal eMMC. I do not want to depend on the sdcard for booting. The rootfs is already on the internal eMMC ie on /dev/mmcblk0p2 . on p1 of the device i have put the uImage and other files. can anyone please guide on installing the uboot on eMMC? regds mallah. On Fri, Jan 17, 2014 at 9:41 AM, Rajesh Mallah <mallah.raj...@gmail.com> wrote: Dear Oliver , Thanks for the patience & detailed explanation. I will see to it and report back. regds mallah. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
