Hi,
On 02/14/14 16:01, Zoltan HERPAI wrote:
http://wiki.openwrt.org/toh/cubietech/cubieboard
http://wiki.openwrt.org/doc/hardware/soc/soc.allwinner.sunxi#installation.process
Just a note, going over this list I noticed that the boot partition was
required to be fat on an SD card, that is not true, u-boot happily boots
from ext[234].
If the installation medium is on NAND, the allwinner bootloaders
boot0/boot1 does scan only for the first fat partition.
Olliver
Of course, you'll need to use the relevant u-boot image built - you can
select it in the menuconfig under Boot loaders.
Regards,
-w-
On Fri, 14 Feb 2014, kelvinh...@gmail.com wrote:
Hi,
How does install to A10 cubieboard?
Thanks,
Kelvin
On Wednesday, November 6, 2013 5:06:16 PM UTC+8, Benjamin Henrion wrote:
Hi,
I compiled the trunk version of openwrt for the cubie a10 here:
http://filez.zoobab.com/openwrt/sunxi/
Gonna make other builds for A20 and the rest.
--
Benjamin Henrion <bhenrion at ffii.org>
FFII Brussels - +32-484-566109 - +32-2-4148403
"In July 2005, after several failed attempts to legalise software
patents in Europe, the patent establishment changed its strategy.
Instead of explicitly seeking to sanction the patentability of
software, they are now seeking to create a central European patent
court, which would establish and enforce patentability rules in their
favor, without any possibility of correction by competing courts or
democratically elected legislators."
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.