Hi, On 05/07/2014 11:19 AM, mike.v...@gmail.com wrote: > On Tuesday, May 6, 2014 9:38:23 AM UTC+2, Hans de Goede wrote: >> Hi, >> >> >> >> On 05/06/2014 09:17 AM, Mike wrote: >> >>> On Tuesday, May 6, 2014 8:37:53 AM UTC+2, Hans de Goede wrote: >> >>>> Hi, >> >>>> >> >>>> On 05/05/2014 11:22 PM, hase nase wrote: >> >>>>> Hi, >> >>>>> >> >>>>> is it possible to use an sata multiplier with a A20 ? I tried it on a >> >>>>> cubieboard, but i only got access to sda and no other connected drive >> >>>> >> >>>> The sata silicon in the sunxi chips claims pmp protocol support >> >>> >> >>> Does the IP support NCQ or only FIS? >> >> >> >> It supports full NCQ. > > Apparently I used the wrong terms. > > I should have used: > NCQ (Native Command Queuing)
This is supported, support for it is explicitly enabled by the sunxi_ahci driver (which is just some glue otherwise). > PMP (Port Multiplier Protocol) This may be supported, someone needs to test, AFAIK the hardware advertises it, but it is explicitly disabled by the sunxi_ahci glue. > CBS (Command Based Switching method for PMP) > FBS (FIS Based Switching method for PMP) See above. Regards, Hans -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.