On 30/05/14 10:49, eynstyn...@gmail.com wrote:
Ok, the driver is compiled now.
loads without force modprobe.
It creates an input device, but after:
i2c state isn't idle (0xf8)
STOP failed!
incomplete xfer (0xff)
reset_chip: gsl_ts_write 1 fail!
init_chip: reset_chip fail: -70
gslx680 1-0040: init_chip failed
The incomplete xfer is not 0x20 so the twi_id is 1 and adapter address correct.
Not sure what the 0xf8 / 0xff codes are but
I'm guessing something is being read sequentially from START. I think it wants
early suspend in the kernel source so the touchscreen is idle in low powered
state.
Still trying.
Can you give me the dmesg?
Joe
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
