hello I am using goodix-gt811 ctp 7 inch and i have not problem to use this module but when i modprobe gpio-sunxi , the interrupt of my ctp disable 1- when gt811_ts is intalled and i modprobe gpio-sunxi ,this message shown on Putty the message is : <6>sunxi_gpio driver init ver 1.3 <3>IRQ handler type mismatch for IRQ 60 <3>current handler: Goodix-TS [<c0015340>] (unwind_backtrace+0x0/0x134) from [<c0094b80>] (__setup_irq+0x3b8/0 x404) [<c0094b80>] (__setup_irq+0x3b8/0x404) from [<c0094d04>] (request_threaded_irq+0 xb0/0x138) [<c0094d04>] (request_threaded_irq+0xb0/0x138) from [<bf0d4ca8>] (sunxi_gpio_pro be+0x3e4/0x490 [gpio_sunxi]) [<bf0d4ca8>] (sunxi_gpio_probe+0x3e4/0x490 [gpio_sunxi]) from [<c04bba50>] (driv er_probe_device+0xb4/0x354) [<c04bba50>] (driver_probe_device+0xb4/0x354) from [<c04bbdc0>] (__driver_attach +0x8c/0x90) [<c04bbdc0>] (__driver_attach+0x8c/0x90) from [<c04b9dd0>] (bus_for_each_dev+0x6 0/0x94) [<c04b9dd0>] (bus_for_each_dev+0x60/0x94) from [<c04bb000>] (bus_add_driver+0xd0 /0x28c) [<c04bb000>] (bus_add_driver+0xd0/0x28c) from [<c04bc394>] (driver_register+0x78 /0x13c) [<c04bc394>] (driver_register+0x78/0x13c) from [<c00086c0>] (do_one_initcall+0x1 1c/0x174) [<c00086c0>] (do_one_initcall+0x11c/0x174) from [<c008244c>] (sys_init_module+0x 78/0x19c) [<c008244c>] (sys_init_module+0x78/0x19c) from [<c000ec00>] (ret_fast_syscall+0x 0/0x30) <3>Can't request irq 60 <4>gpio-sunxi: probe of gpio-sunxi failed with error -16
2- when gpio-sunxi is intalled and i modprobe gt811_ts,this message shown on Putty the message is : ===========================goodix_ts_init===================== ctp_fetch_sysconfig_para. ctp_fetch_sysconfig_para: after: ctp_twi_addr is 0x5d, dirty_addr_buf: 0x5d. dirty_addr_buf[1]: 0xfffe ctp_fetch_sysconfig_para: ctp_twi_id is 1. <6>ctp_fetch_sysconfig_para: screen_max_x = 800. <6>ctp_fetch_sysconfig_para: screen_max_y = 480. <6>ctp_fetch_sysconfig_para: revert_x_flag = 0. <6>ctp_fetch_sysconfig_para: revert_y_flag = 0. <6>ctp_fetch_sysconfig_para: exchange_x_y_flag = 0. goodix_ts_init: after fetch_sysconfig_para: normal_i2c: 0x5d. normal_i2c[1]: 0xfffe <4>i2c-core: driver [Goodix-TS] using legacy suspend method <4>i2c-core: driver [Goodix-TS] using legacy resume method incomplete xfer (0x48) <6>ctp_detect: Detected chip Goodix-TS at adapter 1, address 0x5d <6>Goodix-TS 1-005d: Install gt811 driver. <6>Goodix-TS 1-005d: Driver Release Date:2012-02-08 ======goodix_gt811 probe====== ctp_set_irq_mode: config gpio to int mode. <6>ctp_set_irq_mode, 231: gpio_int_info, port = 8, port_num = 15. INTERRUPT CONFIG <6>Goodix-TS 1-005d: GT811 init info:X_MAX=4096,Y_MAX=4096,TRIG_MODE=RISING EDGE <6>input: gt80x as /devices/virtual/input/input4 <3>IRQ handler type mismatch for IRQ 60 <3>current handler: sunxi-gpio [<c0015340>] (unwind_backtrace+0x0/0x134) from [<c0094b80>] (__setup_irq+0x3b8/0x404) [<c0094b80>] (__setup_irq+0x3b8/0x404) from [<c0094d04>] (request_threaded_irq+0xb0/0x138) [<c0094d04>] (request_threaded_irq+0xb0/0x138) from [<bf0e1388>] (goodix_ts_probe+0x480/0x794 [gt811_ts]) [<bf0e1388>] (goodix_ts_probe+0x480/0x794 [gt811_ts]) from [<c05714dc>] (i2c_device_probe+0xb8/0x118) [<c05714dc>] (i2c_device_probe+0xb8/0x118) from [<c04bba50>] (driver_probe_device+0xb4/0x354) [<c04bba50>] (driver_probe_device+0xb4/0x354) from [<c04b9e70>] (bus_for_each_drv+0x58/0x8c) [<c04b9e70>] (bus_for_each_drv+0x58/0x8c) from [<c04bb930>] (device_attach+0x90/0xa4) [<c04bb930>] (device_attach+0x90/0xa4) from [<c04badd4>] (bus_probe_device+0x84/0xa8) [<c04badd4>] (bus_probe_device+0x84/0xa8) from [<c04b9454>] (device_add+0x520/0x60c) [<c04b9454>] (device_add+0x520/0x60c) from [<c0571824>] (i2c_new_device+0x128/0x1c0) [<c0571824>] (i2c_new_device+0x128/0x1c0) from [<c0572d40>] (i2c_do_add_adapter+0x1ac/0x254) [<c0572d40>] (i2c_do_add_adapter+0x1ac/0x254) from [<c04b9dd0>] (bus_for_each_dev+0x60/0x94) [<c04b9dd0>] (bus_for_each_dev+0x60/0x94) from [<c05722fc>] (i2c_for_each_dev+0x34/0x48) [<c05722fc>] (i2c_for_each_dev+0x34/0x48) from [<c0573654>] (i2c_register_driver+0x84/0xe8) [<c0573654>] (i2c_register_driver+0x84/0xe8) from [<c00086c0>] (do_one_initcall+0x11c/0x174) [<c00086c0>] (do_one_initcall+0x11c/0x174) from [<c008244c>] (sys_init_module+0x78/0x19c) [<c008244c>] (sys_init_module+0x78/0x19c) from [<c000ec00>] (ret_fast_syscall+0x0/0x30) <3>Goodix-TS 1-005d: Cannot allocate ts INT!ERRNO:-16 this messages shows both of them use IRQ 60 how can i resolve this problem thanks for your help -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
