Hi,
On 07/25/2014 10:33 PM, Ian Campbell wrote:
On Thu, 2014-07-24 at 22:54 +0200, Roman Byshko wrote:
Cubietruck has two USB host controllers. This makes them
usable by enabling the EHCI driver for them.
Did you not want to enable for the Cubietruck_FEL config too?
What about other boards with A20 on them? And does this same driver work
for sun4i, sun5i or sun6i?
It should work on sun4i, sun5i and sun7i with one very small modification
(which is actually needed for sun5i and sun7i not for sun4i).
See my reply to the 2nd patch of this series.
The wiki seems to suggest yes for sun4i and sun5i at least. I don't
necessarily expect you will want to add the cfg for boards you can't
test yourself but I'm wondering if I should prod people (well, mainly
Hans so far ;-)) to enable on their boards.
There's a minor conflict with the updated boards.cfg in
u-boot-sunxi.git#next. I can pretty easily resolve it but if you need to
resend the series for some other reason you could save me the trouble
and base it one branch instead of master.
I've already cherry picked this patch for adding it to u-boot-sunxi next
branch, resolving the conflict myself. Unfortunately we cannot take this
patch in sunxi next without also taking the 2nd patch otherwise the build
breaks. See my other reply to the 2nd patch in the series on this.
Regards,
Hans
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
