Hi,
On 19-12-14 19:17, Maxime Ripard wrote:
Hi,
On Thu, Dec 18, 2014 at 09:50:26AM +0100, Hans de Goede wrote:
Hi,
On 18-12-14 03:48, Chen-Yu Tsai wrote:
Hi,
On Thu, Dec 18, 2014 at 1:18 AM, Hans de Goede <hdego...@redhat.com> wrote:
On sun6i the cir block is attached to the reset controller, add support
for de-asserting the reset if a reset controller is specified in dt.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
Acked-by: Mauro Carvalho Chehab <mche...@osg.samsung.com>
Acked-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---
.../devicetree/bindings/media/sunxi-ir.txt | 2 ++
drivers/media/rc/sunxi-cir.c | 25 ++++++++++++++++++++--
2 files changed, 25 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt
b/Documentation/devicetree/bindings/media/sunxi-ir.txt
index 23dd5ad..6b70b9b 100644
--- a/Documentation/devicetree/bindings/media/sunxi-ir.txt
+++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt
@@ -10,6 +10,7 @@ Required properties:
Optional properties:
- linux,rc-map-name : Remote control map name.
+- resets : phandle + reset specifier pair
Should it be optional? Or should we use a sun6i compatible with
a mandatory reset phandle? I mean, the driver/hardware is not
going to work with the reset missing on sun6i.
Seems we are doing it one way for some of our drivers, and
the other (optional) way for more generic ones, like USB.
I do not believe that we should add a new compatible just because
the reset line of a block is hooked up differently. It is the
exact same ip-block. Only now the reset is not controlled
through the apb-gate, but controlled separately.
He has a point though. Your driver might very well probe nicely and
everything, but still wouldn't be functional at all because the reset
line wouldn't have been specified in the DT.
Right, just like other drivers we've, see e.g.:
Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
Which is dealing with this in the same way.
The easiest way to deal with that would be in the bindings doc to
update it with a compatible for the A31, and mentionning that the
reset property is mandatory there.
No the easiest way to deal with this is to expect people writing
the dts to know what they are doing, just like we do for a lot
of the other blocks in sun6i.
Maybe put a generic note somewhere that sun6i has a reset controller,
and that for all the blocks with optional resets property it should
be considered mandatory on sun6i ?
I'm sorry but I'm not going to make this change for the ir bindings
given that we've the same situation in a lot of other places.
Consistency is important. Moreover I believe that having a sun6i
specific compatible string is just wrong, since it is the exact
same hardware block as on sun5i, just with its reset line routed
differently, just like e.g. the mmc controller, the uarts or the gmac
all of which also do not have a sun6i specific compatible to enforce
reset controller usage.
Regards,
Hans
Note that the code itself might not change at all though. I'd just
like to avoid any potential breaking of the DT bindings themselves. If
we further want to refine the code, we can do that however we want.
I have a slight preference for a clean error if reset is missing, but
I won't get in the way just for that.
Maxime
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
