Hi, Icenowy Zheng píše v Út 04. 04. 2017 v 17:50 +0800: > From: Icenowy Zheng <icen...@aosc.xyz> > > Now we have driver for the PRCM CCU, switch to use it instead of > old-style clock nodes for apb0-related clocks in sunxi-h3-h5.dtsi . > > The mux 3 of R_CCU is still the internal oscillator, which is said to be > 16MHz plus minus 30%, and get a measured value of 15MHz~16MHz on my two > H3 boards and one H5 board.
There's issue with the new r_ccu that breaks r_i2c. (no devices can be found on the bus). Reverting this patch fixes the issue with the I2C controller. (everything else being the same) Here's the code I'm using: https://github.com/megous/linux/commits/oran ge-pi-4.12 The last commit is the revert. The issue manifests itself by non-working DVFS, because kernel lacks access to SY8106A regulator, because r_i2c doesn't work with sunxi-ng clock driver (sun8i-r). Relevant difference in registers between working/non-working state is just this (diff -u): 0x01f02400 = 0x00000000 0x01f02404 = 0x00000000 -0x01f02408 = 0x00000091 +0x01f02408 = 0x00000095 DATA register inisde the I2C controller 0x01f0240c = 0x00000044 0x01f02410 = 0x000000f8 -0x01f02414 = 0x00000059 +0x01f02414 = 0x00000000 CLOCK setup register inside the I2C controller 0x01f02418 = 0x00000000 0x01f0241c = 0x00000000 0x01f02420 = 0x0000003a It looks like the new sunxi-ng clock driver causes the I2C driver to not correctly configure the CLOCK register. I don't know why and I'm not sure how to deal with this. Any ideas what can I do next? thank you and regards, o. > Signed-off-by: Icenowy Zheng <icen...@aosc.xyz> > --- > Changes in v4: > - Temporarily dropped the CCU headers. > Changes in v3: > - Change osc32000 to iosc. > > arch/arm/boot/dts/sunxi-h3-h5.dtsi | 45 > ++++++++++++-------------------------- > 1 file changed, 14 insertions(+), 31 deletions(-) > > diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi > b/arch/arm/boot/dts/sunxi-h3-h5.dtsi > index 6640ebfa6419..1aeeacb3a884 100644 > --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi > +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi > @@ -68,31 +68,12 @@ > clock-output-names = "osc32k"; > }; > > - apb0: apb0_clk { > - compatible = "fixed-factor-clock"; > + iosc: internal-osc-clk { > #clock-cells = <0>; > - clock-div = <1>; > - clock-mult = <1>; > - clocks = <&osc24M>; > - clock-output-names = "apb0"; > - }; > - > - apb0_gates: clk@01f01428 { > - compatible = "allwinner,sun8i-h3-apb0-gates-clk", > - "allwinner,sun4i-a10-gates-clk"; > - reg = <0x01f01428 0x4>; > - #clock-cells = <1>; > - clocks = <&apb0>; > - clock-indices = <0>, <1>; > - clock-output-names = "apb0_pio", "apb0_ir"; > - }; > - > - ir_clk: ir_clk@01f01454 { > - compatible = "allwinner,sun4i-a10-mod0-clk"; > - reg = <0x01f01454 0x4>; > - #clock-cells = <0>; > - clocks = <&osc32k>, <&osc24M>; > - clock-output-names = "ir"; > + compatible = "fixed-clock"; > + clock-frequency = <16000000>; > + clock-accuracy = <300000000>; > + clock-output-names = "iosc"; > }; > }; > > @@ -576,9 +557,12 @@ > <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; > }; > > - apb0_reset: reset@01f014b0 { > - reg = <0x01f014b0 0x4>; > - compatible = "allwinner,sun6i-a31-clock-reset"; > + r_ccu: clock@1f01400 { > + compatible = "allwinner,sun50i-a64-r-ccu"; > + reg = <0x01f01400 0x100>; > + clocks = <&osc24M>, <&osc32k>, <&iosc>; > + clock-names = "hosc", "losc", "iosc"; > + #clock-cells = <1>; > #reset-cells = <1>; > }; > > @@ -589,9 +573,9 @@ > > ir: ir@01f02000 { > compatible = "allwinner,sun5i-a13-ir"; > - clocks = <&apb0_gates 1>, <&ir_clk>; > + clocks = <&r_ccu 4>, <&r_ccu 11>; > clock-names = "apb", "ir"; > - resets = <&apb0_reset 1>; > + resets = <&r_ccu 0>; > interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; > reg = <0x01f02000 0x40>; > status = "disabled"; > @@ -601,9 +585,8 @@ > compatible = "allwinner,sun8i-h3-r-pinctrl"; > reg = <0x01f02c00 0x400>; > interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; > + clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>; > clock-names = "apb", "hosc", "losc"; > - resets = <&apb0_reset 0>; > gpio-controller; > #gpio-cells = <3>; > interrupt-controller; > -- > 2.12.2 > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
signature.asc
Description: This is a digitally signed message part