The A64 SoC has the same dma engine as the H3 (sun8i), with a reduced amount of physical channels. To allow future reuse of the compatible, leave the channel count etc. in the config data blank and retrieve it from the devicetree.
Signed-off-by: Stefan Brüns <stefan.bru...@rwth-aachen.de> --- drivers/dma/sun6i-dma.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c index b5ecc97a0d5a..118b29bb1eac 100644 --- a/drivers/dma/sun6i-dma.c +++ b/drivers/dma/sun6i-dma.c @@ -1127,6 +1127,28 @@ static struct sun6i_dma_config sun8i_h3_dma_cfg = { BIT(DMA_SLAVE_BUSWIDTH_8_BYTES); }; +/* + * The A64 binding uses the number of dma channels from the + * device tree node. + */ +static struct sun6i_dma_config sun50i_a64_dma_cfg = { + .nr_max_channels = 0, + .nr_max_requests = 0, + .nr_max_vchans = 0, + .clock_autogate_enable = sun6i_enable_clock_autogate_h3; + .set_burst_length = sun6i_set_burst_length_h3; + .src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16); + .dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16); + .src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | + BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | + BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | + BIT(DMA_SLAVE_BUSWIDTH_8_BYTES); + .dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | + BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | + BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | + BIT(DMA_SLAVE_BUSWIDTH_8_BYTES); +}; + /* * The V3s have only 8 physical channels, a maximum DRQ port id of 23, * and a total of 24 usable source and destination endpoints. @@ -1154,6 +1176,7 @@ static const struct of_device_id sun6i_dma_match[] = { { .compatible = "allwinner,sun8i-a83t-dma", .data = &sun8i_a83t_dma_cfg }, { .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg }, { .compatible = "allwinner,sun8i-v3s-dma", .data = &sun8i_v3s_dma_cfg }, + { .compatible = "allwinner,sun50i-a64-dma", .data = &sun50i_a64_dma_cfg }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, sun6i_dma_match); -- 2.14.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.