On Sun, Sep 17, 2017 at 05:19:52AM +0200, Stefan Brüns wrote: > The A64 is register compatible with the H3, but has a different number > of dma channels and request ports. > > Attach additional properties to the node to allow future reuse of the > compatible for controllers with different number of channels/requests. > > If dma-requests is not specified, the register layout defined maximum > of 32 is used. > > Signed-off-by: Stefan Brüns <stefan.bru...@rwth-aachen.de> > --- > .../devicetree/bindings/dma/sun6i-dma.txt | 26 > ++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt > b/Documentation/devicetree/bindings/dma/sun6i-dma.txt > index 98fbe1a5c6dd..6ebc79f95202 100644 > --- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt > +++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt > @@ -27,6 +27,32 @@ Example: > #dma-cells = <1>; > }; > > +------------------------------------------------------------------------------ > +For A64 DMA controller: > + > +Required properties: > +- compatible: "allwinner,sun50i-a64-dma" > +- dma-channels: Number of DMA channels supported by the controller. > + Refer to Documentation/devicetree/bindings/dma/dma.txt > +- all properties above, i.e. reg, interrupts, clocks, resets and #dma-cells > + > +Optional properties: > +- dma-requests: Number of DMA request signals supported by the controller. > + Refer to Documentation/devicetree/bindings/dma/dma.txt > + > +Example: > + dma: dma-controller@01c02000 {
Drop the leading 0. Building dtbs with W=2 will tell you this. With that, Acked-by: Rob Herring <r...@kernel.org> > + compatible = "allwinner,sun50i-a64-dma"; > + reg = <0x01c02000 0x1000>; > + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&ccu CLK_BUS_DMA>; > + dma-channels = <8>; > + dma-requests = <27>; > + resets = <&ccu RST_BUS_DMA>; > + #dma-cells = <1>; > + }; > +------------------------------------------------------------------------------ > + > Clients: > > DMA clients connected to the A31 DMA controller must use the format > -- > 2.14.1 > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.