On the A80 the pins on port B can trigger interrupts, and those are assigned to the second interrupt bank. Having two pins assigned to the same interrupt bank/pin combination does not look healthy (instead more like a copy&paste bug from pins PA14-PA16), so fix the interrupt bank for pins PB14-PB16, which is actually 1.
I don't have any A80 board, so could not test this. Signed-off-by: Andre Przywara <[email protected]> --- drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c index 472ef0d91b99..5553c0eb0f41 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c +++ b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c @@ -145,19 +145,19 @@ static const struct sunxi_desc_pin sun9i_a80_pins[] = { SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), SUNXI_FUNCTION(0x3, "mcsi"), /* MCLK */ - SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 14)), /* PB_EINT14 */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 14)), /* PB_EINT14 */ SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 15), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), SUNXI_FUNCTION(0x3, "mcsi"), /* SCK */ SUNXI_FUNCTION(0x4, "i2c4"), /* SCK */ - SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 15)), /* PB_EINT15 */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 15)), /* PB_EINT15 */ SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 16), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), SUNXI_FUNCTION(0x3, "mcsi"), /* SDA */ SUNXI_FUNCTION(0x4, "i2c4"), /* SDA */ - SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 16)), /* PB_EINT16 */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 16)), /* PB_EINT16 */ /* Hole */ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 0), -- 2.14.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
