From: Ondrej Jirman <meg...@megous.com> I went through the datasheets for H6 and H5, and compared the differences. RTCs are largely similar, but not entirely compatible. Incompatibilities are in details not yet implemented by the rtc driver though.
I also corrected the clock tree in H6 DTSI. There's a small detail here, that's not described absolutely correctly in DTSI, but the difference is not really that material. ext_osc32k is originally modelled as a fixed clock that feeds into RTC module, but in reality it's the RTC module that implements via its registers enabling and disabling of this oscillator/clock. Though: - there's no other possible user of ext_osc32k than RTC module - there's no other possible external configuration for the crystal circuit that would need to be handled in the dts per board So I guess, while the description is not perfect, this patch series still improves the current situation. Or maybe I'm misunderstanding something, and &ext_osc32k node just describes a fact that there's a crystal on the board. Then, everything is perhaps fine. :) For now, the enable bit for this oscillator is toggled by the re-parenting code automatically, as needed. This patchset is necessary for implementing the WiFi/Bluetooth support on boards using H6 SoC. Please take a look. Thank you and regards, Ondrej Jirman Ondrej Jirman (3): dt-bindings: Add compatible for H6 RTC rtc: sun6i: Add support for H6 RTC arm64: dts: sun50i-h6: Add support for RTC and fix the clock tree .../devicetree/bindings/rtc/sun6i-rtc.txt | 1 + arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 30 +++++++------- drivers/rtc/rtc-sun6i.c | 40 ++++++++++++++++++- 3 files changed, 55 insertions(+), 16 deletions(-) -- 2.21.0 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
