On Fri, Apr 12, 2019 at 8:07 PM megous via linux-sunxi <linux-sunxi@googlegroups.com> wrote: > > From: Ondrej Jirman <meg...@megous.com> > > RTC on H6 is mostly the same as on H5 and H3. It has slight differences > mostly in features that are not yet supported by this driver. > > Some differences are already stated in the comments in existing code. > One other difference is that H6 has extra bit in LOSC_CTRL_REG, called > EXT_LOSC_EN to enable/disable external low speed crystal oscillator. > > It also has bit EXT_LOSC_STA in LOSC_AUTO_SWT_STA_REG, to check whether > external low speed oscillator is working correctly. > > This patch adds support for enabling LOSC when necessary: > > - during reparenting > - when probing the clock > > H6 also has capacbility to automatically reparent RTC clock from > external crystal oscillator, to internal RC oscillator, if external > oscillator fails. This is enabled by default. Disable it during > probe. > > Signed-off-by: Ondrej Jirman <meg...@megous.com> > --- > drivers/rtc/rtc-sun6i.c | 40 ++++++++++++++++++++++++++++++++++++++-- > 1 file changed, 38 insertions(+), 2 deletions(-) > > diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c > index 11f56de52179..7375a530c565 100644 > --- a/drivers/rtc/rtc-sun6i.c > +++ b/drivers/rtc/rtc-sun6i.c > @@ -41,9 +41,11 @@ > /* Control register */ > #define SUN6I_LOSC_CTRL 0x0000 > #define SUN6I_LOSC_CTRL_KEY (0x16aa << 16) > +#define SUN6I_LOSC_CTRL_AUTO_SWT_BYPASS BIT(15)
Manual says bit 14? Or is this different from LOSC_AUTO_SWT_EN? The rest looks ok. ChenYu -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/CAGb2v675j-aCLMgPJOzr9yx1XxsUvHRr_K7VnL%3Dp8mSdwpu2jw%40mail.gmail.com.
