From: Olof Johansson <[email protected]> Add the known i2c devices on seaboard to the i2c table.
Also rename the temperature sensor device node, and mark it as a nct1008 instead of an adt7461 (which it is -- the chips are compatible though). Signed-off-by: Olof Johansson <[email protected]> [swarren: Removed isl29018 from patch; it's already there now. Fixed interrupts properties now that Tegra GPIO is an interrupt controller. Moved smart-battery to the correct I2C bus.] Signed-off-by: Stephen Warren <[email protected]> --- arch/arm/boot/dts/tegra-seaboard.dts | 25 +++++++++++++++++++++++-- 1 files changed, 23 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 19db40a..c4d171e 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -282,10 +282,24 @@ interrupt-parent = <&gpio>; interrupts = < 202 0x04 >; /* GPIO PZ2 */ }; + + gyrometer@68 { + compatible = "invn,mpu3050"; + reg = <0x68>; + interrupt-parent = <&gpio>; + interrupts = <204 0x04>; /* gpio PZ4 */ + }; }; i2c@7000c400 { clock-frequency = <100000>; + + smart-battery@b { + compatible = "ti,bq20z75", "smart-battery-1.1"; + reg = <0xb>; + ti,i2c-retry-count = <2>; + ti,poll-retry-count = <10>; + }; }; i2c@7000c500 { @@ -295,10 +309,17 @@ i2c@7000d000 { clock-frequency = <400000>; - adt7461@4c { - compatible = "adt7461"; + temperature-sensor@4c { + compatible = "nct1008"; reg = <0x4c>; }; + + magnetometer@c { + compatible = "ak8975"; + reg = <0xc>; + interrupt-parent = <&gpio>; + interrupts = <109 0x04>; /* gpio PN5 */ + }; }; i2s@70002a00 { -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
