On Tue, 2024-10-01 at 15:20 +0200, Jan Kara wrote:
> On Tue 01-10-24 06:58:56, Jeff Layton wrote:
> > The VFS has always used coarse-grained timestamps when updating the
> > ctime and mtime after a change. This has the benefit of allowing
> > filesystems to optimize away a lot metadata updates, down to around 1
> > per jiffy, even when a file is under heavy writes.
> >
> > Unfortunately, this has always been an issue when we're exporting via
> > NFSv3, which relies on timestamps to validate caches. A lot of changes
> > can happen in a jiffy, so timestamps aren't sufficient to help the
> > client decide when to invalidate the cache. Even with NFSv4, a lot of
> > exported filesystems don't properly support a change attribute and are
> > subject to the same problems with timestamp granularity. Other
> > applications have similar issues with timestamps (e.g backup
> > applications).
> >
> > If we were to always use fine-grained timestamps, that would improve the
> > situation, but that becomes rather expensive, as the underlying
> > filesystem would have to log a lot more metadata updates.
> >
> > What we need is a way to only use fine-grained timestamps when they are
> > being actively queried. Use the (unused) top bit in inode->i_ctime_nsec
> > as a flag that indicates whether the current timestamps have been
> > queried via stat() or the like. When it's set, we allow the kernel to
> > use a fine-grained timestamp iff it's necessary to make the ctime show
> > a different value.
> >
> > This solves the problem of being able to distinguish the timestamp
> > between updates, but introduces a new problem: it's now possible for a
> > file being changed to get a fine-grained timestamp. A file that is
> > altered just a bit later can then get a coarse-grained one that appears
> > older than the earlier fine-grained time. This violates timestamp
> > ordering guarantees.
> >
> > To remedy this, keep a global monotonic atomic64_t value that acts as a
> > timestamp floor. When we go to stamp a file, we first get the latter of
> > the current floor value and the current coarse-grained time. If the
> > inode ctime hasn't been queried then we just attempt to stamp it with
> > that value.
> >
> > If it has been queried, then first see whether the current coarse time
> > is later than the existing ctime. If it is, then we accept that value.
> > If it isn't, then we get a fine-grained timestamp.
> >
> > Filesystems can opt into this by setting the FS_MGTIME fstype flag.
> > Others should be unaffected (other than being subject to the same floor
> > value as multigrain filesystems).
> >
> > Tested-by: Randy Dunlap <rdun...@infradead.org> # documentation bits
> > Signed-off-by: Jeff Layton <jlay...@kernel.org>
>
> Mostly looks good. Some smaller comments below.
>
> > +/**
> > + * current_time - Return FS time (possibly fine-grained)
> > + * @inode: inode.
> > + *
> > + * Return the current time truncated to the time granularity supported by
> > + * the fs, as suitable for a ctime/mtime change. If the ctime is flagged
> > + * as having been QUERIED, get a fine-grained timestamp, but don't update
> > + * the floor.
> > + *
> > + * For a multigrain inode, this is effectively an estimate of the timestamp
> > + * that a file would receive. An actual update must go through
> > + * inode_set_ctime_current().
> > + */
> > +struct timespec64 current_time(struct inode *inode)
> > +{
> > + struct timespec64 now;
> > + u32 cns;
> > +
> > + ktime_get_coarse_real_ts64_mg(&now);
> > +
> > + if (!is_mgtime(inode))
> > + goto out;
> > +
> > + /* If nothing has queried it, then coarse time is fine */
> > + cns = smp_load_acquire(&inode->i_ctime_nsec);
> > + if (cns & I_CTIME_QUERIED) {
> > + /*
> > + * If there is no apparent change, then get a fine-grained
> > + * timestamp.
> > + */
> > + if (now.tv_nsec == (cns & ~I_CTIME_QUERIED))
> > + ktime_get_real_ts64(&now);
> > + }
> > +out:
> > + return timestamp_truncate(now, inode);
> > +}
> > +EXPORT_SYMBOL(current_time);
> > +
> > static int inode_needs_update_time(struct inode *inode)
> > {
> > + struct timespec64 now, ts;
> > int sync_it = 0;
> > - struct timespec64 now = current_time(inode);
> > - struct timespec64 ts;
> >
> > /* First try to exhaust all avenues to not sync */
> > if (IS_NOCMTIME(inode))
> > return 0;
> >
> > + now = current_time(inode);
> > +
> > ts = inode_get_mtime(inode);
> > if (!timespec64_equal(&ts, &now))
> > - sync_it = S_MTIME;
> > + sync_it |= S_MTIME;
> >
> > ts = inode_get_ctime(inode);
> > if (!timespec64_equal(&ts, &now))
> > @@ -2598,6 +2637,15 @@ void inode_nohighmem(struct inode *inode)
> > }
> > EXPORT_SYMBOL(inode_nohighmem);
> >
> > +struct timespec64 inode_set_ctime_to_ts(struct inode *inode, struct
> > timespec64 ts)
> > +{
> > + set_normalized_timespec64(&ts, ts.tv_sec, ts.tv_nsec);
> > + inode->i_ctime_sec = ts.tv_sec;
> > + inode->i_ctime_nsec = ts.tv_nsec;
> > + return ts;
> > +}
> > +EXPORT_SYMBOL(inode_set_ctime_to_ts);
> > +
> > /**
> > * timestamp_truncate - Truncate timespec to a granularity
> > * @t: Timespec
> > @@ -2630,36 +2678,75 @@ struct timespec64 timestamp_truncate(struct
> > timespec64 t, struct inode *inode)
> > EXPORT_SYMBOL(timestamp_truncate);
> >
> > /**
> > - * current_time - Return FS time
> > - * @inode: inode.
> > + * inode_set_ctime_current - set the ctime to current_time
> > + * @inode: inode
> > *
> > - * Return the current time truncated to the time granularity supported by
> > - * the fs.
> > + * Set the inode's ctime to the current value for the inode. Returns the
> > + * current value that was assigned. If this is not a multigrain inode,
> > then we
> > + * set it to the later of the coarse time and floor value.
> > *
> > - * Note that inode and inode->sb cannot be NULL.
> > - * Otherwise, the function warns and returns time without truncation.
> > + * If it is multigrain, then we first see if the coarse-grained timestamp
> > is
> > + * distinct from what we have. If so, then we'll just use that. If we have
> > to
> > + * get a fine-grained timestamp, then do so, and try to swap it into the
> > floor.
> > + * We accept the new floor value regardless of the outcome of the cmpxchg.
> > + * After that, we try to swap the new value into i_ctime_nsec. Again, we
> > take
> > + * the resulting ctime, regardless of the outcome of the swap.
>
> This comment seems outdated now. No floor in this function anymore...
>
True. Will fix.
> > -struct timespec64 current_time(struct inode *inode)
> > +struct timespec64 inode_set_ctime_current(struct inode *inode)
> > {
> > struct timespec64 now;
> > + u32 cns, cur;
> ...
>
> > diff --git a/fs/stat.c b/fs/stat.c
> > index 41e598376d7e..381926fb405f 100644
> > --- a/fs/stat.c
> > +++ b/fs/stat.c
> > @@ -26,6 +26,35 @@
> > #include "internal.h"
> > #include "mount.h"
> >
> > +/**
> > + * fill_mg_cmtime - Fill in the mtime and ctime and flag ctime as QUERIED
> > + * @stat: where to store the resulting values
> > + * @request_mask: STATX_* values requested
> > + * @inode: inode from which to grab the c/mtime
> > + *
> > + * Given @inode, grab the ctime and mtime out if it and store the result
> ^^ of
>
> > + * in @stat. When fetching the value, flag it as QUERIED (if not already)
> > + * so the next write will record a distinct timestamp.
> > + */
> > +void fill_mg_cmtime(struct kstat *stat, u32 request_mask, struct inode
> > *inode)
> > +{
>
> Given how things worked out in the end, it seems this function doesn't need
> to handle mtime at all and we can move mtime handling back to shared generic
> code?
>
I don't think we can. The mtime is effectively derived from the ctime.
If I query only the mtime, I think it's reasonable to expect that it
will change if there is another write, even if I don't query the ctime.
We won't get that unless we can also set the flag in the ctime when
only the mtime is requested.
> > + atomic_t *pcn = (atomic_t *)&inode->i_ctime_nsec;
> > +
> > + /* If neither time was requested, then don't report them */
> > + if (!(request_mask & (STATX_CTIME|STATX_MTIME))) {
> > + stat->result_mask &= ~(STATX_CTIME|STATX_MTIME);
> > + return;
> > + }
> > +
> > + stat->mtime = inode_get_mtime(inode);
> > + stat->ctime.tv_sec = inode->i_ctime_sec;
> > + stat->ctime.tv_nsec = (u32)atomic_read(pcn);
> > + if (!(stat->ctime.tv_nsec & I_CTIME_QUERIED))
> > + stat->ctime.tv_nsec = ((u32)atomic_fetch_or(I_CTIME_QUERIED,
> > pcn));
> > + stat->ctime.tv_nsec &= ~I_CTIME_QUERIED;
> > +}
> > +EXPORT_SYMBOL(fill_mg_cmtime);
> > +
> > /**
> > * generic_fillattr - Fill in the basic attributes from the inode struct
> > * @idmap: idmap of the mount the inode was found from
> > @@ -58,8 +87,14 @@ void generic_fillattr(struct mnt_idmap *idmap, u32
> > request_mask,
> > stat->rdev = inode->i_rdev;
> > stat->size = i_size_read(inode);
> > stat->atime = inode_get_atime(inode);
> > - stat->mtime = inode_get_mtime(inode);
> > - stat->ctime = inode_get_ctime(inode);
> > +
> > + if (is_mgtime(inode)) {
> > + fill_mg_cmtime(stat, request_mask, inode);
> > + } else {
> > + stat->ctime = inode_get_ctime(inode);
> > + stat->mtime = inode_get_mtime(inode);
> > + }
> > +
> > stat->blksize = i_blocksize(inode);
> > stat->blocks = inode->i_blocks;
> >
> > diff --git a/include/linux/fs.h b/include/linux/fs.h
> > index e3c603d01337..23908bad166c 100644
> > --- a/include/linux/fs.h
> > +++ b/include/linux/fs.h
> > @@ -1653,6 +1653,17 @@ static inline struct timespec64
> > inode_set_mtime(struct inode *inode,
> > return inode_set_mtime_to_ts(inode, ts);
> > }
> >
> > +/*
> > + * Multigrain timestamps
> > + *
> > + * Conditionally use fine-grained ctime and mtime timestamps when there
> > + * are users actively observing them via getattr. The primary use-case
> > + * for this is NFS clients that use the ctime to distinguish between
> > + * different states of the file, and that are often fooled by multiple
> > + * operations that occur in the same coarse-grained timer tick.
>
> Again, mtime seems unaffected by mgtime changes now.
>
I still think we need this.
> > + */
> > +#define I_CTIME_QUERIED ((u32)BIT(31))
> > +
>
> Honza
--
Jeff Layton <jlay...@kernel.org>
