On Mon, 20 May 2002, Greg KH wrote: > What does /proc/bus/usb/devices look like with the device plugged in? > Are there strings associated with the device that usbview does not > display?
Looks like not. This is all I get: T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1 P: Vendor=041e ProdID=1002 Rev= 1.00 C:* #Ifs= 1 Cfg#= 1 Atr=60 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl= 10ms E: Ad=01(O) Atr=03(Int.) MxPS= 16 Ivl= 10ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms So I guess there is no way to have it. :( I should write Creative to add this to their firmware. Best Regards, Jacek _______________________________________________________________ Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
