Starting in 2.6.5-rc1-mm2, and present in 2.6.5-rc2-mm1 (the last kernel
i tried before that I believe was 2.6.4-rc1-m2, and it worked fine),
I've been having some major problems with USB mice and an Intel Centrino
chipset with uhci/ehci. If a USB mouse is connected at startup before
all of the USB modules are loaded, it doesn't work (no activity from
/dev/input/mice) but it shows up in the USB devices list. If I
disconnect the mouse, it isn't removed from the devices list. If I try
to remove any of the usb modules, the rmmod process will just hang and I
can't kill it. If I connect a USB mouse after the system has fully
started, it will work fine. But if I then disconnect it, the same
problems as above happen, e.g. it isn't removed from the devices list,
and I can't remove any of the USB modules.
If i try to reconnect the mouse after it's been disconnected, it doesn't
work at all.
I'm not seeing any kernel oopses, just lots of weird behavior.
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
