received this message from stdlog... the message said to send it to this 
address... so i am

the Device is a Concord DuoLcd Digital camera. It works ok, with hotplug and 
all. No issues seen thus far even with this msg quoted below

and oh yes...Running Fedora Core 2 (re-compiled kernel 2.6.5-1.358)
but this shows up on 2.6.7 pristine source too
I am not on this mailing list, maybe i'll join.so if any more details are 
needed pls mail me directly. As soon as time permits, will go thru the src & 
send 
across a patch.

--
usb 1-1: USB disconnect, address 3
usb 1-1: new full speed USB device using address 4
usb 1-1: string descriptor 0 read error: -71
usb 1-1: string descriptor 0 read error: -71
scsi1 : SCSI emulation for USB Mass Storage devices
USB Mass Storage device found at 4
usb 1-1: USB disconnect, address 4
usb 1-1: new full speed USB device using address 5
usb 1-1: control timeout on ep0out
scsi2 : SCSI emulation for USB Mass Storage devices
  Vendor: CONCORD   Model: DIGITAL CAMERA    Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 14528 512-byte hdwr sectors (7 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
 sda: sda1
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
USB Mass Storage device found at 5
usb 1-1: USB disconnect, address 5
usb 1-1: new full speed USB device using address 6
usb-storage: This device (0595,4343,0100 S 00 P 00) has an unneeded Protocol 
entry in unusual_devs.h
   Please send a copy of this message to 
<[EMAIL PROTECTED]>
usb-storage: probe of 1-1:1.0 failed with error -5
usb 1-1: USB disconnect, address 6
--

hope this helps

regards
Erle Pereira
--
ERLEPEREIRA.com
GNU/LINUX "@" work



-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=5047&alloc_id=10808&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to