On Thu, Feb 24, 2005 at 10:36:31AM -0500, Dan Streetman wrote: > > On Thu, 24 Feb 2005, Vojtech Pavlik wrote: > > >This will break setups where someone is using a non-calibrated > >touchscreen with the current driver, right? I don't think I can merge it > >at least until there is a way to set the hardware calibration to sane > >values. > > I don't think it should. This should have the same effect as the previous > move from calibrated values to raw values (2.6.6 to 2.6.7), i.e. anyone > using software calibration will just have to re-run their calibration > program. And using the calibrated coordinates is what the driver did up > to the 2.6.7 kernel. > > However, if you think passing the raw values is still needed, would a > module parameter that selects raw or hw-calibrated be better?
That'd be a conflict-less solution, indeed. -- Vojtech Pavlik SuSE Labs, SuSE CR ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel