Am Samstag, 11. Juni 2005 14:52 schrieb Wakko Warner:
> Oliver Neukum wrote:
> > Am Samstag, 11. Juni 2005 06:11 schrieb Wakko Warner:
> > > Oliver Neukum wrote:
> > > > Sorry, I should be more specific. It will print out the error codes
> > > > internal to the USB layer which are meaningful even if interrupts are
> > > > shared.
> > > > Also, are you seeing tx errors in the error count?
> > >
> > > Unless I did something wrong, it's apparently not in the USB subsystem.
> > >
> > > I have 2.6.12-rc3 and rc4 compiled. Same config file on a test system.
> > > again, rc3 works, rc4 does not. I booted rc3 and force loaded the usb
> > > modules from rc4 into rc3. It tainted the kernel, but it worked.
> > >
> > > I booted into rc4. I do have ACPI compiled so I added acpi=off. This did
> > > not work, same problem as before. I left a ping running, the usb
> > > controller
> > > was on IRQ 9. The test system is an old NEC notebook with an Intel
> > > chipset
> > > (thus uhci-hcd usb1.1). I plugged in a Belkin USB2.0 cardbus card (USB1.1
> > > is serviced by ohci-hcd) and plugged the ethernet adapter into that. Same
> > > problem.
> >
> > Do you see tx errors?
>
> No. Oh oops I forgot to say the ping caused the interrupts to increase.
> ifconfig showed 1 packet sent but never went up.
This might very well indicate that the queue is not reenabled.
The interrupt handler should do that. If you enable debug in kaweth.c,
you'll learn more. If it doesn't help, I'll send you a patch which produces
more output.
Regards
Oliver
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput
a projector? How fast can you ride your desk chair down the office luge track?
If you want to score the big prize, get to know the little guy.
Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
