On Monday 05 March 2007, Gene Heskett wrote: Repost, slight edit. No one has any comments on this lack of usb connectivity?
I have a new F6C1500 Belkin UPS, which when I plug in a pl2303 cable, becomes /dev/ttyUSB0 and Belkins own monitor soft works about 99%. Its found by the kernel and an lsusb if I plug a usb cable in directly, but no device is made by udev when I do. dmesg sees this: Mar 5 20:07:59 coyote kernel: usb 3-3.4.4: new low speed USB device using ehci_hcd and address 9 Mar 5 20:07:59 coyote kernel: usb 3-3.4.4: configuration #1 chosen from 1 choice Mar 5 20:08:00 coyote kernel: hiddev96: USB HID v1.11 Device [Belkin Belkin UPS] on usb-0000:00:02.2-3.4.4 And two new devices /dev/usbdev-hub.address_ep00 and _ep80 are created but cat can't find them to test if any data is coming out. Greg K-H:You can't cat those files, that doesn't do anything. Shouldn't I see a /dev/ttyUSB2 created since there are already 2 pl2303 cable's there now? FC6, uptodate, homebrewed kernel so I could be missing a module. Greg K-H:Can you provide the output of /proc/bus/usb/devices? And this should be on the linux-usb-devel list, not linux-hotplug-devel, as it doesn't have anything to do with udev. Gene:Thank you, Greg. I've unplugged the pl2303 and plugged a usb cable in direct, here is the cat of /proc/bus/usb/devices: T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 4, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.20-rds ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.2 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0409 ProdID=0059 Rev= 1.00 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms T: Bus=03 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 5 Spd=480 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0409 ProdID=0059 Rev= 1.00 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms T: Bus=03 Lev=03 Prnt=05 Port=00 Cnt=01 Dev#= 9 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=050d ProdID=0751 Rev= 0.01 S: Manufacturer=Belkin S: Product=Belkin UPS C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 20mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=248ms T: Bus=03 Lev=03 Prnt=05 Port=01 Cnt=02 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=070e Rev=93.17 S: Product=USB Storage S: SerialNumber=000000009317 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=03 Lev=03 Prnt=05 Port=02 Cnt=03 Dev#= 7 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=046d ProdID=c510 Rev=34.10 S: Manufacturer=Logitech S: Product=USB Receiver C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 50mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 0/900 us ( 0%), #Int= 1, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.20-rds ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.1 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0451 ProdID=2046 Rev= 1.25 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.20-rds ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04b8 ProdID=0005 Rev= 1.00 S: Manufacturer=EPSON S: Product=USB Printer S: SerialNumber=RL0200301161041200 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I obviously have too many hubs... Is there no chance of making a direct usb connection work to this device? Cheers, Gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Try the Moo Shu Pork. It is especially good today. ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
