I cannot get my compact flash reader recognised. Nothing shows up from a cat /proc/scsi/scsi
I've tried connecting the reader to different ports and get the following output from 'dmesg | grep usb' ============================================================ usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb.c: new USB bus registered, assigned bus number 1 usb.c: new USB bus registered, assigned bus number 2 usb.c: USB device 2 (vend/prod 0x4e6/0x1010) is not claimed by any active driver. usb-uhci.c: $Revision: 1.268 $ time 09:18:52 Dec 19 2001 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.268:USB Universal Host Controller Interface driver usb.c: USB disconnect on device 2 usb.c: USB device 3 (vend/prod 0x4e6/0x1010) is not claimed by any active driver. usb.c: USB disconnect on device 3 usb.c: USB device 4 (vend/prod 0x4e6/0x1010) is not claimed by any active driver. ============================================================= This shows that my actions in plugging the device into different ports is being recognised (by the hotplugging service) but I don't know how to proceed and get the device installed. Please help _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
