[Linux-usb-users] Problem with USB

[Gustavo Puche Rodr�guez]

I have a Debian 3.0 Woody Linux installed with the kernel 2.4.18 and i have problems with the USB. In the boot messages apears this:

usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xe08b7000, IRQ 9
usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 1
usb-ohci.c: USB OHCI at membase 0xe08b9000, IRQ 5
usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 2
usb.c: registered new driver usblp
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=2 (error=-110)
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=3 (error=-110)

I have tried with the 2.4.16 kernel and i have obtained the same problem. In adition to this the devices conected to the system are:

PCI devices found:
Bus 0, device 0, function 0:
Host bridge: PCI device 1039:0745 (Silicon Integrated Systems [SiS]) (rev 1).
Master Capable. Latency=32. Non-prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
Bus 0, device 1, function 0:
PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (rev 0).
Master Capable. Latency=99. Min Gnt=14.
Bus 0, device 2, function 0:
ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 0).
Bus 0, device 2, function 2:
USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 7).
IRQ 9.
Master Capable. Latency=32. Max Lat=80.
Non-prefetchable 32 bit memory at 0xe8000000 [0xe8000fff].
Bus 0, device 2, function 3:
USB Controller: Silicon Integrated Systems [SiS] 7001 (#2) (rev 7).
IRQ 5.
Master Capable. Latency=32. Max Lat=80.
Non-prefetchable 32 bit memory at 0xe8001000 [0xe8001fff].
Bus 0, device 2, function 5:
IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 208).
Master Capable. Latency=16. I/O at 0x4000 [0x400f].
Bus 0, device 2, function 7:
Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev 160).
IRQ 11.
Master Capable. Latency=32. Min Gnt=52.Max Lat=11.
I/O at 0xe800 [0xe8ff].
I/O at 0xec00 [0xec3f].
Bus 1, device 0, function 0:
VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 21).
Master Capable. Latency=32. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xe6000000 [0xe6ffffff].
Prefetchable 32 bit memory at 0xe4000000 [0xe5ffffff].

I have changed same values in the BIOS because the IRQ of the VGA card and the IRQ of one of the USB port where the same, but i have not obtained any result.

The USB port is unusable. Can anybody help me?

Gus.





-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing your web site with SSL, click here to get a FREE TRIAL of a Thawte Server Certificate: http://www.gothawte.com/rd524.html
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users