Hi, i'm using linux 2.4.20 on an underclocked AMD [EMAIL PROTECTED] There is a passive usb hub attached to it's usb port on which two printers are connected. when switching on/off a printer sometimes i get the following debug msgs:
printer.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x043D pid 0x000C hub.c: usb_hub_port_status (2) failed (err = -110) printer.c: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 hub.c: usb_hub_port_status (2) failed (err = -110) hub.c: usb_hub_port_status (2) failed (err = -110) hub.c: usb_hub_port_status (2) failed (err = -110) usb.c: USB disconnect on device 00:01.2-1.1 address 4 printer.c: usblp0: removed hub.c: usb_hub_port_status (2) failed (err = -110) hub.c: usb_hub_port_status (2) failed (err = -110) hub.c: usb_hub_port_status (2) failed (err = -110) printer.c: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x043D pid 0x000C hub.c: usb_hub_port_status (2) failed (err = -110) hub.c: usb_hub_port_status (2) failed (err = -110) hub.c: usb_hub_port_status (2) failed (err = -110) hub.c: usb_hub_port_status (2) failed (err = -110) hub.c: usb_hub_port_status (2) failed (err = -110) usb.c: USB disconnect on device 00:01.2-1.1 address 6 printer.c: usblp0: removed usb.c: USB disconnect on device 00:01.2-1.2 address 5 printer.c: usblp1: removed sometimes the printer is not recognized by the driver and i have no connection to it. is this a driver problem? -- Regards Lars ******************************************************************* * Lars T�uber * Es lebe GNU! * * Berlin, Germany * God save the GNU! * * mailto:[EMAIL PROTECTED] * http://www.gnu.org * ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
