Hi you, at first: thanks for the two answers I got by now. And I have to say: I'm a little confused, but read...
On Tue, Mar 04, 2003 at 01:25:42PM -0800, Stephen J. Gowdy wrote: > What's in /proc/bus/usb/devices? Looks strange that there is no product or > vendor id. it says: # cat /proc/bus/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=bce0 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0dda ProdID=0001 Rev= 2.5b C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl= 10ms and strangely (the only thing changed since last eMail is, the notebook was suspended to ram and resumed) I got plugging in the cable: Mar 4 22:37:13 independence /etc/hotplug/usb.agent: ... no modules for USB product dda/1/25b usbview says "IC1100 V2.5B", and tries to mount /dev/sdb1 mount: No medium found To answer Brians question in that eMail: I have compiled multi LUN support in that kernel using: CONFIG_SCSI_MULTI_LUN=y I can't try a mount on sda, because I don't own a CF or MD .-( I'm really confused... > > Mar 4 20:12:55 independence kernel: Manufacturer: ICSI > > Mar 4 20:12:55 independence kernel: Product: IC1100 V2.5B > > Mar 4 20:12:55 independence kernel: SerialNumber: 000123454229 > > [...] > > Mar 4 20:12:58 independence /etc/hotplug/usb.agent: ... no modules for USB > > product 0/0/0 and now getting: Mar 4 22:37:13 independence /etc/hotplug/usb.agent: ... no modules for USB product dda/1/25b Where can I get a module for the USB product dda/1/25b (which may be my card reader)? TiA -- \o/ Michael Thies --- [EMAIL PROTECTED] "Think! About Your Work" - The Pragmatic Programmer ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
