I'm trying to access a Vosonic V-MP3H. It has two slots for reading
several card formats. It has a built in HD for copying the contents of
the cards for later downloading to the PC.
/etc/hotplug/usb.agent: ... no modules for USB product d7d/310/100
Right now, I can only access CF cards through the device. The HD is not
accessible. I can do a "mount /dev/sda1 /mnt/usbhd" and read/write the CF
card. But I can't find the /dev entry for the HD.
Am I doing something wrong, or is this just not yet supported? What
should be my next step?
-Paul Dickson
[EMAIL PROTECTED] hotplug]# cat /proc/scsi/sg/device_hdr /proc/scsi/sg/devices
host chan id lun type opens qdepth busy online
0 0 0 0 5 0 5 0 1
1 0 0 0 0 0 1 0 1
1 0 0 1 0 0 1 0 1
1 0 0 2 0 0 1 0 1
[EMAIL PROTECTED] hotplug]# cat /proc/bus/usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=f040
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
P: Vendor=0d7d ProdID=0310 Rev= 1.00
S: Manufacturer=
S: Product=Usb Card Adapter
S: SerialNumber=000140000AA7
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 4 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=255ms
E: Ad=01(O) Atr=03(Int.) MxPS= 16 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=f020
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
[EMAIL PROTECTED] hotplug]# cat /proc/scsi/usb-storage-0/1
Host scsi1: usb-storage
Vendor:
Product: Usb Card Adapter
Serial Number: 000140000AA7
Protocol: Transparent SCSI
Transport: Bulk
GUID: 0d7d03100000000140000aa7
Attached: Yes
Physically connecting the V-MP3H without a CF card:
[EMAIL PROTECTED] hotplug]# dmesg
uhci.c: f040: wakeup_hc
uhci.c: root-hub INT complete: port1: 180 port2: 93 data: 4
hub.c: port 1, portstatus 300, change 0, 1.5 Mb/s
hub.c: port 2, portstatus 101, change 1, 12 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 101, change 1, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 103, change 0, 12 Mb/s
hub.c: new USB device 00:11.3-2, assigned address 3
uhci.c: uhci_result_control() failed with status 440000
[df6690c0] link (1f669062) element (1f66a210)
Element != First TD
0: [df66a1e0] link (1f66a210) e3 Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP)
(buf=15100be0)
1: [df66a210] link (00000001) e0 IOC Stalled CRC/Timeo Length=7ff MaxLen=7ff DT1
EndPt=0 Dev=0, PID=69(IN) (buf=00000000)
usb.c: USB device not accepting new address=3 (error=-84)
uhci.c: f040: suspend_hc
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
uhci.c: f040: wakeup_hc
uhci.c: root-hub INT complete: port1: 180 port2: 93 data: 4
hub.c: port 1, portstatus 300, change 0, 1.5 Mb/s
hub.c: port 2, portstatus 101, change 1, 12 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 101, change 1, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 103, change 0, 12 Mb/s
hub.c: new USB device 00:11.3-2, assigned address 4
usb.c: kmalloc IF d20cce40, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
usb.c: USB device number 4 default language ID 0x409
Manufacturer:
Product: Usb Card Adapter
SerialNumber: 000140000AA7
emi26_probe start<7>usbserial.c: none matched
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 89
usb-storage: Array length appears to be: 91
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xd9edd6a0 Out: 0xd9edd6b4 Int: 0xd9edd6dc (Period 255)
usb-storage: Found existing GUID 0d7d03100000000140000aa7
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 4
usb.c: usb-storage driver claimed interface d20cce40
usb.c: kusbd: /sbin/hotplug add 4
The entries is /var/log/messages:
Mar 15 22:19:47 pink kernel: hub.c: new USB device 00:11.3-2, assigned address 3
Mar 15 22:19:49 pink kernel: [df6690c0] link (1f669062) element (1f66a210)
Mar 15 22:19:49 pink kernel: Element != First TD
Mar 15 22:19:49 pink kernel: 0: [df66a1e0] link (1f66a210) e3 Length=7 MaxLen=7 DT0
EndPt=0 Dev=0, PID=2d(SETUP) (buf=15100be0)
Mar 15 22:19:49 pink kernel: 1: [df66a210] link (00000001) e0 IOC Stalled CRC/Timeo
Length=7ff MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000)
Mar 15 22:19:49 pink kernel:
Mar 15 22:19:49 pink kernel: usb.c: USB device not accepting new address=3 (error=-84)
Mar 15 22:19:50 pink kernel: hub.c: new USB device 00:11.3-2, assigned address 4
Mar 15 22:19:50 pink kernel: Manufacturer:
Mar 15 22:19:50 pink kernel: Product: Usb Card Adapter
Mar 15 22:19:50 pink kernel: SerialNumber: 000140000AA7
Mar 15 22:19:50 pink kernel: emi26_probe start<7>usbserial.c: none matched
Mar 15 22:19:51 pink /sbin/hotplug: arguments (usb) env (DEVFS=/proc/bus/usb OLDPWD=/
PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug SHLVL=1 HOME=/
DEVICE=/proc/bus/usb/002/004 INTERFACE=8/6/80 PRODUCT=d7d/310/100 TYPE=0/0/0
DEBUG=kernel _=/bin/env)
Mar 15 22:19:51 pink /sbin/hotplug: invoke /etc/hotplug/usb.agent ()
Mar 15 22:19:54 pink /etc/hotplug/usb.agent: ... no modules for USB product d7d/310/100
-Paul Dickson
-------------------------------------------------------
This SF.net email is sponsored by:Crypto Challenge is now open!
Get cracking and register here for some mind boggling fun and
the chance of winning an Apple iPod:
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
