It should be /dev/sdb1 (or whatever partition you actually have on the card) or /dev/sdc1. Although there should be things telling you this in your logs that I don't see below.
On Sat, 15 Mar 2003, Paul Dickson wrote: > I'm trying to access a Vosonic V-MP3H. It has two slots for reading > several card formats. It has a built in HD for copying the contents of > the cards for later downloading to the PC. > > /etc/hotplug/usb.agent: ... no modules for USB product d7d/310/100 > > Right now, I can only access CF cards through the device. The HD is not > accessible. I can do a "mount /dev/sda1 /mnt/usbhd" and read/write the CF > card. But I can't find the /dev entry for the HD. > > Am I doing something wrong, or is this just not yet supported? What > should be my next step? > > -Paul Dickson > > [EMAIL PROTECTED] hotplug]# cat /proc/scsi/sg/device_hdr /proc/scsi/sg/devices > host chan id lun type opens qdepth busy online > 0 0 0 0 5 0 5 0 1 > 1 0 0 0 0 0 1 0 1 > 1 0 0 1 0 0 1 0 1 > 1 0 0 2 0 0 1 0 1 > > [EMAIL PROTECTED] hotplug]# cat /proc/bus/usb/devices > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI-alt Root Hub > S: SerialNumber=f040 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1 > P: Vendor=0d7d ProdID=0310 Rev= 1.00 > S: Manufacturer= > S: Product=Usb Card Adapter > S: SerialNumber=000140000AA7 > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA > I: If#= 0 Alt= 0 #EPs= 4 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=255ms > E: Ad=01(O) Atr=03(Int.) MxPS= 16 Ivl=255ms > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI-alt Root Hub > S: SerialNumber=f020 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > > [EMAIL PROTECTED] hotplug]# cat /proc/scsi/usb-storage-0/1 > Host scsi1: usb-storage > Vendor: > Product: Usb Card Adapter > Serial Number: 000140000AA7 > Protocol: Transparent SCSI > Transport: Bulk > GUID: 0d7d03100000000140000aa7 > Attached: Yes > > Physically connecting the V-MP3H without a CF card: > > [EMAIL PROTECTED] hotplug]# dmesg > uhci.c: f040: wakeup_hc > uhci.c: root-hub INT complete: port1: 180 port2: 93 data: 4 > hub.c: port 1, portstatus 300, change 0, 1.5 Mb/s > hub.c: port 2, portstatus 101, change 1, 12 Mb/s > hub.c: port 2 connection change > hub.c: port 2, portstatus 101, change 1, 12 Mb/s > hub.c: port 2, portstatus 101, change 0, 12 Mb/s > hub.c: port 2, portstatus 101, change 0, 12 Mb/s > hub.c: port 2, portstatus 101, change 0, 12 Mb/s > hub.c: port 2, portstatus 101, change 0, 12 Mb/s > hub.c: port 2, portstatus 103, change 0, 12 Mb/s > hub.c: new USB device 00:11.3-2, assigned address 3 > uhci.c: uhci_result_control() failed with status 440000 > [df6690c0] link (1f669062) element (1f66a210) > Element != First TD > 0: [df66a1e0] link (1f66a210) e3 Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, > PID=2d(SETUP) (buf=15100be0) > 1: [df66a210] link (00000001) e0 IOC Stalled CRC/Timeo Length=7ff MaxLen=7ff DT1 > EndPt=0 Dev=0, PID=69(IN) (buf=00000000) > > usb.c: USB device not accepting new address=3 (error=-84) > uhci.c: f040: suspend_hc > hub.c: port 2, portstatus 100, change 0, 12 Mb/s > uhci.c: f040: wakeup_hc > uhci.c: root-hub INT complete: port1: 180 port2: 93 data: 4 > hub.c: port 1, portstatus 300, change 0, 1.5 Mb/s > hub.c: port 2, portstatus 101, change 1, 12 Mb/s > hub.c: port 2 connection change > hub.c: port 2, portstatus 101, change 1, 12 Mb/s > hub.c: port 2, portstatus 101, change 0, 12 Mb/s > hub.c: port 2, portstatus 101, change 0, 12 Mb/s > hub.c: port 2, portstatus 101, change 0, 12 Mb/s > hub.c: port 2, portstatus 101, change 0, 12 Mb/s > hub.c: port 2, portstatus 103, change 0, 12 Mb/s > hub.c: new USB device 00:11.3-2, assigned address 4 > usb.c: kmalloc IF d20cce40, numif 1 > usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3 > usb.c: USB device number 4 default language ID 0x409 > Manufacturer: > Product: Usb Card Adapter > SerialNumber: 000140000AA7 > emi26_probe start<7>usbserial.c: none matched > usb-storage: act_altsettting is 0 > usb-storage: id_index calculated to be: 89 > usb-storage: Array length appears to be: 91 > usb-storage: USB Mass Storage device detected > usb-storage: Endpoints: In: 0xd9edd6a0 Out: 0xd9edd6b4 Int: 0xd9edd6dc (Period 255) > usb-storage: Found existing GUID 0d7d03100000000140000aa7 > WARNING: USB Mass Storage data integrity not assured > USB Mass Storage device found at 4 > usb.c: usb-storage driver claimed interface d20cce40 > usb.c: kusbd: /sbin/hotplug add 4 > > The entries is /var/log/messages: > > Mar 15 22:19:47 pink kernel: hub.c: new USB device 00:11.3-2, assigned address 3 > Mar 15 22:19:49 pink kernel: [df6690c0] link (1f669062) element (1f66a210) > Mar 15 22:19:49 pink kernel: Element != First TD > Mar 15 22:19:49 pink kernel: 0: [df66a1e0] link (1f66a210) e3 Length=7 MaxLen=7 > DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=15100be0) > Mar 15 22:19:49 pink kernel: 1: [df66a210] link (00000001) e0 IOC Stalled > CRC/Timeo Length=7ff MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) > Mar 15 22:19:49 pink kernel: > Mar 15 22:19:49 pink kernel: usb.c: USB device not accepting new address=3 > (error=-84) > Mar 15 22:19:50 pink kernel: hub.c: new USB device 00:11.3-2, assigned address 4 > Mar 15 22:19:50 pink kernel: Manufacturer: > Mar 15 22:19:50 pink kernel: Product: Usb Card Adapter > Mar 15 22:19:50 pink kernel: SerialNumber: 000140000AA7 > Mar 15 22:19:50 pink kernel: emi26_probe start<7>usbserial.c: none matched > Mar 15 22:19:51 pink /sbin/hotplug: arguments (usb) env (DEVFS=/proc/bus/usb > OLDPWD=/ PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug SHLVL=1 > HOME=/ DEVICE=/proc/bus/usb/002/004 INTERFACE=8/6/80 PRODUCT=d7d/310/100 TYPE=0/0/0 > DEBUG=kernel _=/bin/env) > Mar 15 22:19:51 pink /sbin/hotplug: invoke /etc/hotplug/usb.agent () > Mar 15 22:19:54 pink /etc/hotplug/usb.agent: ... no modules for USB product > d7d/310/100 > > > -Paul Dickson > > > > ------------------------------------------------------- > This SF.net email is sponsored by:Crypto Challenge is now open! > Get cracking and register here for some mind boggling fun and > the chance of winning an Apple iPod: > http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
