Hi,
I can't get my hp 3420 recognised as a usb2 device (it does work fine as
usb1). Should this work? I'm using 2.4.21-rc2. Nb. My usb2 scanner works
fine as usb2 (but it hasn't had a lot of testing as I only got this new
mb today :)
this is what dmesg gives when the printer is plugged in.
hub.c: new USB device 00:10.1-2, assigned address 3
usb.c: USB device 3 (vend/prod 0x3f0/0x7104) is not claimed by any
active driver.
usb.c: registered new driver usblp
printer.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2
vid 0x03F0 pid 0x7104
printer.c: v0.11: USB Printer Device Class driver
this is what usbview tells me
deskjet 3420
Manufacturer: hp
Serial Number: HU28S1R3BR1J
Speed: 12Mb/s (full)
USB Version: 2.00
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 03f0
Product Id: 7104
Revision Number: 1.00
Config Number: 1
Number of Interfaces: 1
Attributes: c0
MaxPower Needed: 2mA
Interface Number: 0
Name: usblp
Alternate Number: 0
Class: 07(print)
Sub Class: 1
Protocol: 2
Number of Endpoints: 2
Endpoint Address: 81
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 02
Direction: out
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Any ideas?
thanks
--
rob <[EMAIL PROTECTED]>
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
