Hi everyone, got following problem under 2.4.22 aswell as under 2.6.test5:
the usb2 driver for my chipset (SiS 7XXX) seem to load successful: Code: dmesg | grep ehci ehci_hcd 0000:00:03.3: EHCI Host Controller ehci_hcd 0000:00:03.3: irq 5, pci mem e090d000 ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 my usb keyboard and usb mouse work well, but when the usb2 harddrive is plugged in nothing happens. no message in dmesg that a new devices was detected....nothing.... so the usb-storage module can't load... my current lsmod: Code: lsmod Module Size Used by fglrx 192580 9 sis_agp 3584 1 agpgart 26696 1 sis_agp rtc 10920 0 usb_storage 23936 0 hid 23424 0 ehci_hcd 21888 0 sr_mod 13216 0 PS: this is the last thing to be working to get me using linux completely...erm i got my hardrive working with the usb1.1 support, but this is sl0w as hell... i've done following steps: loaded following modules: Code: ehci_hcd (for the usb2.0 support) ohci_hcd (for the usb1.1 support) usb_storage (storage support ;) everything works but a hdparm -Tt /dev/sda1 reveals a speed of 1MB/s Code: # hdparm -Tt /dev/sda1 /dev/sda1: Timing buffer-cache reads: 1080 MB in 2.00 seconds = 539.54 MB/sec Timing buffered disk reads: 4 MB in 3.90 seconds = 1.03 MB/sec but the kernel msges still say that usb 2.0 is enabled..... Any tips would be great, big thx in advance xDAMNx ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
