Hi Stephen, i only see my hardrive if i additionally load the usb1.1 driver (usb-ohci) with only the ehci support enabled nothing shows up in /dev/usb/devices. But the strange thing the usb-keyboard and mouse work...(the mouse isn't mounted to /dev/usbmouse/) And with ehci only the usb storage driver wont be touched (dmesg)
Thx for any further help, xDAMNx On Wednesday 24 September 2003 02:52, you wrote: > What's in /proc/bus/usb/devices? How can you test the speed of something > that doesn't show up? > > On Wed, 24 Sep 2003, Matthias Mantel wrote: > > Hi everyone, > > > > got following problem under 2.4.22 aswell as under 2.6.test5: > > > > the usb2 driver for my chipset (SiS 7XXX) seem to load successful: > > > > Code: > > dmesg | grep ehci > > ehci_hcd 0000:00:03.3: EHCI Host Controller > > ehci_hcd 0000:00:03.3: irq 5, pci mem e090d000 > > ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 > > ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 > > > > > > my usb keyboard and usb mouse work well, but when the usb2 harddrive is > > plugged in nothing happens. no message in dmesg that a new devices was > > detected....nothing.... so the usb-storage module can't load... > > > > my current lsmod: > > Code: > > lsmod > > Module Size Used by > > fglrx 192580 9 > > sis_agp 3584 1 > > agpgart 26696 1 sis_agp > > rtc 10920 0 > > usb_storage 23936 0 > > hid 23424 0 > > ehci_hcd 21888 0 > > sr_mod 13216 0 > > > > PS: this is the last thing to be working to get me using linux > > completely...erm i got my hardrive working with the usb1.1 support, but > > this is sl0w as hell... > > > > i've done following steps: > > > > loaded following modules: > > Code: > > > > ehci_hcd (for the usb2.0 support) > > ohci_hcd (for the usb1.1 support) > > usb_storage (storage support ;) > > > > > > everything works but a > > > > hdparm -Tt /dev/sda1 > > > > reveals a speed of 1MB/s > > Code: > > > > # hdparm -Tt /dev/sda1 > > > > /dev/sda1: > > Timing buffer-cache reads: 1080 MB in 2.00 seconds = 539.54 MB/sec > > Timing buffered disk reads: 4 MB in 3.90 seconds = 1.03 MB/sec > > > > > > but the kernel msges still say that usb 2.0 is enabled..... > > > > > > > > Any tips would be great, big thx in advance > > > > xDAMNx > > > > > > > > ------------------------------------------------------- > > This sf.net email is sponsored by:ThinkGeek > > Welcome to geek heaven. > > http://thinkgeek.com/sf > > _______________________________________________ > > [EMAIL PROTECTED] > > To unsubscribe, use the last form field at: > > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > > -- > /------------------------------------+-------------------------\ > > |Stephen J. Gowdy | SLAC, MailStop 34, | > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | > |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | > |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | > > \------------------------------------+-------------------------/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
