Well, it doesn't seem to want to respond to any of the standard transports. I don't think there is much else to do.
Tho, it makes me wonder why there was an entry for this in unusual_devs.h -- tho some of those entries came from Shuttle/SCM and were put there because they said it should work. Matt On Sat, Mar 06, 2004 at 11:44:18PM -0500, Kipp Cannon wrote: > Hi, > > OK, it's been a couple of days but I've done what you asked. Here's > /var/log/messages and dmesg after attching the device. I didn't try to > mount a disk. > > --- begin dmesg --- > : Thermal Zone [THRM] (36 C) > Console: switching to colour frame buffer device 128x96 > pty: 256 Unix98 ptys configured > Real Time Clock Driver v1.12 > Non-volatile memory driver v1.2 > hw_random hardware driver 1.0.0 loaded > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > ICH3M: IDE controller at PCI slot 0000:00:1f.1 > ICH3M: chipset revision 2 > ICH3M: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:DMA, hdd:pio > hda: IC25N030ATCS04-0, ATA DISK drive > Using anticipatory io scheduler > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > hdc: QSI CD-RW/DVD-ROM SBW-161, ATAPI CD/DVD-ROM drive > ide1 at 0x170-0x177,0x376 on irq 15 > hda: max request size: 128KiB > hda: 58605120 sectors (30005 MB) w/1768KiB Cache, CHS=58140/16/63, UDMA(100) > hda: hda1 hda2 > Console: switching to colour frame buffer device 128x96 > mice: PS/2 mouse device common for all mice > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > input: AT Translated Set 2 keyboard on isa0060/serio0 > NET: Registered protocol family 2 > IP: routing cache hash table of 2048 buckets, 16Kbytes > TCP: Hash tables configured (established 16384 bind 32768) > NET: Registered protocol family 1 > NET: Registered protocol family 17 > ACPI: (supports S0 S3 S4 S5) > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 140k freed > Adding 2096472k swap on /dev/hda2. Priority:-1 extents:1 > EXT3 FS on hda1, internal journal > Linux Kernel Card Services > options: [pci] [cardbus] [pm] > Yenta: CardBus bridge found at 0000:01:05.0 [107b:1450] > Yenta: ISA IRQ mask 0x0898, PCI irq 10 > Socket status: 30000007 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > inserting floppy driver for 2.6.3 > Floppy drive(s): fd0 is 1.44M > FDC 0 is a National Semiconductor PC87306 > Linux agpgart interface v0.100 (c) Dave Jones > agpgart: Detected an Intel 830M Chipset. > agpgart: Maximum main memory to use for agp memory: 202M > agpgart: Detected 892K stolen memory. > agpgart: AGP aperture is 128M @ 0xe8000000 > mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x80000 > [drm] Initialized i830 1.3.2 20021108 on minor 0 > parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] > parport0: irq 7 detected > parport0: cpp_daisy: aa5500ff(38) > parport0: assign_addrs: aa5500ff(38) > parport0: cpp_daisy: aa5500ff(38) > parport0: assign_addrs: aa5500ff(38) > lp0: using parport0 (polling). > Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled > ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > PCI: Enabling device 0000:00:1f.6 (0000 -> 0001) > input: PS/2 Generic Mouse on isa0060/serio1 > input: PC Speaker > PCI: Setting latency timer of device 0000:01:03.0 to 64 > Intel(R) PRO/100 Network Driver - version 2.3.36-k1 > Copyright (c) 2003 Intel Corporation > > PCI: Setting latency timer of device 0000:01:08.0 to 64 > e100: selftest OK. > e100: eth0: Intel(R) PRO/100 Network Connection > Hardware receive checksums enabled > > drivers/usb/core/usb.c: registered new driver usbfs > drivers/usb/core/usb.c: registered new driver hub > drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: irq 10, io base 00001840 > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 > drivers/usb/host/uhci-hcd.c: detected 2 ports > uhci_hcd 0000:00:1d.0: root hub device address 1 > usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 > drivers/usb/core/message.c: USB device number 1 default language ID 0x409 > usb usb1: Product: UHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.3 uhci_hcd > usb usb1: SerialNumber: 0000:00:1d.0 > drivers/usb/core/usb.c: usb_hotplug > usb usb1: registering 1-0:1.0 (config #1, interface 0) > drivers/usb/core/usb.c: usb_hotplug > hub 1-0:1.0: usb_probe_interface > hub 1-0:1.0: usb_probe_interface - got id > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > hub 1-0:1.0: standalone hub > hub 1-0:1.0: ganged power switching > hub 1-0:1.0: global over-current protection > hub 1-0:1.0: Port indicators are not supported > hub 1-0:1.0: power on to power good time: 2ms > hub 1-0:1.0: hub controller current requirement: 0mA > hub 1-0:1.0: local power source is good > hub 1-0:1.0: no over-current condition exists > hub 1-0:1.0: enabling power on all ports > uhci_hcd 0000:00:1d.1: UHCI Host Controller > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: irq 10, io base 00001860 > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 > drivers/usb/host/uhci-hcd.c: detected 2 ports > uhci_hcd 0000:00:1d.1: root hub device address 1 > usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 > drivers/usb/core/message.c: USB device number 1 default language ID 0x409 > usb usb2: Product: UHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.3 uhci_hcd > usb usb2: SerialNumber: 0000:00:1d.1 > drivers/usb/core/usb.c: usb_hotplug > usb usb2: registering 2-0:1.0 (config #1, interface 0) > drivers/usb/core/usb.c: usb_hotplug > hub 2-0:1.0: usb_probe_interface > hub 2-0:1.0: usb_probe_interface - got id > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > hub 2-0:1.0: standalone hub > hub 2-0:1.0: ganged power switching > hub 2-0:1.0: global over-current protection > hub 2-0:1.0: Port indicators are not supported > hub 2-0:1.0: power on to power good time: 2ms > hub 2-0:1.0: hub controller current requirement: 0mA > hub 2-0:1.0: local power source is good > hub 2-0:1.0: no over-current condition exists > hub 2-0:1.0: enabling power on all ports > hub 1-0:1.0: port 2, status 301, change 1, 1.5 Mb/s > hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x301 > usb 1-2: new low speed USB device using address 2 > usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 > drivers/usb/core/message.c: USB device number 2 default language ID 0x409 > usb 1-2: Product: USB-PS/2 Optical Mouse > usb 1-2: Manufacturer: Logitech > drivers/usb/core/usb.c: usb_hotplug > usb 1-2: registering 1-2:1.0 (config #1, interface 0) > drivers/usb/core/usb.c: usb_hotplug > drivers/usb/host/uhci-hcd.c: 1860: suspend_hc > e100: eth0 NIC Link is Up 10 Mbps Half duplex > cs: IO port probe 0x0c00-0x0cff: clean. > cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x80f > cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x4d0-0x4d7 > cs: IO port probe 0x0a00-0x0aff: clean. > drivers/usb/core/usb.c: registered new driver hiddev > hid 1-2:1.0: usb_probe_interface > hid 1-2:1.0: usb_probe_interface - got id > input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2 > drivers/usb/core/usb.c: registered new driver hid > drivers/usb/input/hid-core.c: v2.0:USB HID core driver > NET: Registered protocol family 10 > Disabled Privacy Extensions on device c02f7fe0(lo) > IPv6 over IPv4 tunneling driver > mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x80000 > eth0: no IPv6 routers present > atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). > atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. > atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). > atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. > mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x80000 > atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). > atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. > atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). > atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. > mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x80000 > atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). > atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. > atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). > atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. > hub 1-0:1.0: port 1, status 101, change 1, 12 Mb/s > hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 > usb 1-1: new full speed USB device using address 3 > usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 > drivers/usb/core/message.c: USB device number 3 default language ID 0x409 > usb 1-1: Product: eUSB ATA / ATAPI Adapter > usb 1-1: Manufacturer: SCM Microsystems Inc. > drivers/usb/core/usb.c: usb_hotplug > usb 1-1: registering 1-1:1.0 (config #1, interface 0) > drivers/usb/core/usb.c: usb_hotplug > SCSI subsystem initialized > Initializing USB Mass Storage driver... > usb-storage 1-1:1.0: usb_probe_interface > usb-storage 1-1:1.0: usb_probe_interface - got id > usb-storage: USB Mass Storage device detected > usb-storage: act_altsetting is 0, id_index is 27 > usb-storage: -- associate_dev > usb-storage: Vendor: Shuttle > usb-storage: Product: CD-RW Device > usb-storage: Transport: Bulk > usb-storage: Protocol: 8020i > usb-storage: Endpoints: In: 0xc9c30874 Out: 0xc9c30860 Int: 0xc9c30888 (Period 32) > usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1 > usb-storage: GetMaxLUN command result is -32, data is 0 > usb-storage: *** thread sleeping. > scsi0 : SCSI emulation for USB Mass Storage devices > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Command INQUIRY (6 bytes) > usb-storage: 12 00 00 00 24 00 > usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 12 > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > usb-storage: Status code -32; transferred 31/31 > usb-storage: clearing endpoint halt for pipe 0xc0008300 > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=01 len=0 > drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000 > [cf3a92a0] link (0f3a91e2) element (0f82e0c0) > 0: [cf82e0c0] link (0f82e100) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 > Dev=3, PID=2d(SETUP) (buf=0f1d10a0) > 1: [cf82e100] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, > PID=69(IN) (buf=00000000) > > usb-storage: usb_stor_clear_halt: result = -110 > usb-storage: Bulk command transfer result=4 > usb-storage: -- transport indicates error, resetting > usb-storage: usb_stor_Bulk_reset called > usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 > drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000 > [cf3a9270] link (0f3a91e2) element (0f82e080) > 0: [cf82e080] link (0f82e140) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 > Dev=3, PID=2d(SETUP) (buf=0f1d10a0) > 1: [cf82e140] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, > PID=69(IN) (buf=00000000) > > usb-storage: Soft reset failed: -110 > usb-storage: scsi cmd done, result=0x70000 > usb-storage: *** thread sleeping. > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Command INQUIRY (6 bytes) > usb-storage: 12 00 00 00 24 00 > usb-storage: Bulk Command S 0x43425355 T 0x2 L 36 F 128 Trg 0 LUN 0 CL 12 > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > usb-storage: Status code -32; transferred 31/31 > usb-storage: clearing endpoint halt for pipe 0xc0008300 > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=01 len=0 > drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000 > [cf3a9270] link (0f3a91e2) element (0f82e080) > 0: [cf82e080] link (0f82e100) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 > Dev=3, PID=2d(SETUP) (buf=0f1d10a0) > 1: [cf82e100] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, > PID=69(IN) (buf=00000000) > > usb-storage: usb_stor_clear_halt: result = -110 > usb-storage: Bulk command transfer result=4 > usb-storage: -- transport indicates error, resetting > usb-storage: usb_stor_Bulk_reset called > usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 > drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000 > [cf3a92a0] link (0f3a91e2) element (0f82e0c0) > 0: [cf82e0c0] link (0f82e140) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 > Dev=3, PID=2d(SETUP) (buf=0f1d10a0) > 1: [cf82e140] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, > PID=69(IN) (buf=00000000) > > usb-storage: Soft reset failed: -110 > usb-storage: scsi cmd done, result=0x70000 > usb-storage: *** thread sleeping. > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Command INQUIRY (6 bytes) > usb-storage: 12 00 00 00 24 00 > usb-storage: Bulk Command S 0x43425355 T 0x3 L 36 F 128 Trg 0 LUN 0 CL 12 > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > usb-storage: Status code -32; transferred 31/31 > usb-storage: clearing endpoint halt for pipe 0xc0008300 > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=01 len=0 > drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000 > [cf3a92a0] link (0f3a91e2) element (0f82e0c0) > 0: [cf82e0c0] link (0f82e100) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 > Dev=3, PID=2d(SETUP) (buf=0f1d10a0) > 1: [cf82e100] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, > PID=69(IN) (buf=00000000) > > usb-storage: usb_stor_clear_halt: result = -110 > usb-storage: Bulk command transfer result=4 > usb-storage: -- transport indicates error, resetting > usb-storage: usb_stor_Bulk_reset called > usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 > drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000 > [cf3a9270] link (0f3a91e2) element (0f82e080) > 0: [cf82e080] link (0f82e140) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 > Dev=3, PID=2d(SETUP) (buf=0f1d10a0) > 1: [cf82e140] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, > PID=69(IN) (buf=00000000) > > usb-storage: Soft reset failed: -110 > usb-storage: scsi cmd done, result=0x70000 > usb-storage: *** thread sleeping. > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Bad target number (1:0) > usb-storage: scsi cmd done, result=0x40000 > usb-storage: *** thread sleeping. > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Bad target number (2:0) > usb-storage: scsi cmd done, result=0x40000 > usb-storage: *** thread sleeping. > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Bad target number (3:0) > usb-storage: scsi cmd done, result=0x40000 > usb-storage: *** thread sleeping. > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Bad target number (4:0) > usb-storage: scsi cmd done, result=0x40000 > usb-storage: *** thread sleeping. > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Bad target number (5:0) > usb-storage: scsi cmd done, result=0x40000 > usb-storage: *** thread sleeping. > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Bad target number (6:0) > usb-storage: scsi cmd done, result=0x40000 > usb-storage: *** thread sleeping. > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Bad target number (7:0) > usb-storage: scsi cmd done, result=0x40000 > usb-storage: *** thread sleeping. > WARNING: USB Mass Storage data integrity not assured > USB Mass Storage device found at 3 > drivers/usb/core/usb.c: registered new driver usb-storage > USB Mass Storage support registered. > --- end dmesg --- > > --- begin /var/log/messages --- > Mar 6 13:07:46 localhost kernel: atkbd.c: Unknown key released (translated set 2, > code 0x7a on isa0060/serio0). > Mar 6 13:07:46 localhost kernel: atkbd.c: This is an XFree86 bug. It shouldn't > access hardware directly. > Mar 6 13:07:46 localhost kernel: atkbd.c: Unknown key released (translated set 2, > code 0x7a on isa0060/serio0). > Mar 6 13:07:46 localhost kernel: atkbd.c: This is an XFree86 bug. It shouldn't > access hardware directly. > Mar 6 13:09:10 localhost gconfd (kipp-1625): GConf server is not in use, shutting > down. > Mar 6 13:09:10 localhost gconfd (kipp-1625): Exiting > Mar 6 13:09:50 localhost gconfd (kipp-1812): starting (version 2.4.0.1), pid 1812 > user 'kipp' > Mar 6 13:09:50 localhost gconfd (kipp-1812): Resolved address > "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only config source at > position 0 > Mar 6 13:09:50 localhost gconfd (kipp-1812): Resolved address > "xml:readwrite:/home/kipp/.gconf" to a writable config source at position 1 > Mar 6 13:09:50 localhost gconfd (kipp-1812): Resolved address > "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only config source at > position 2 > Mar 6 13:10:21 localhost kernel: usb 1-1: new full speed USB device using address 3 > Mar 6 13:10:21 localhost kernel: usb 1-1: Product: eUSB ATA / ATAPI Adapter > Mar 6 13:10:21 localhost kernel: usb 1-1: Manufacturer: SCM Microsystems Inc. > Mar 6 13:10:22 localhost kernel: SCSI subsystem initialized > Mar 6 13:10:22 localhost kernel: Initializing USB Mass Storage driver... > Mar 6 13:10:22 localhost kernel: scsi0 : SCSI emulation for USB Mass Storage devices > Mar 6 13:10:22 localhost kernel: [cf3a92a0] link (0f3a91e2) element (0f82e0c0) > Mar 6 13:10:22 localhost kernel: 0: [cf82e0c0] link (0f82e100) e0 Stalled > CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=0f1d10a0) > Mar 6 13:10:22 localhost kernel: 1: [cf82e100] link (00000001) e3 IOC Active > Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=69(IN) (buf=00000000) > Mar 6 13:10:22 localhost kernel: > Mar 6 13:10:22 localhost kernel: [cf3a9270] link (0f3a91e2) element (0f82e080) > Mar 6 13:10:22 localhost kernel: 0: [cf82e080] link (0f82e140) e0 Stalled > CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=0f1d10a0) > Mar 6 13:10:22 localhost kernel: 1: [cf82e140] link (00000001) e3 IOC Active > Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=69(IN) (buf=00000000) > Mar 6 13:10:22 localhost kernel: > Mar 6 13:10:22 localhost kernel: [cf3a9270] link (0f3a91e2) element (0f82e080) > Mar 6 13:10:22 localhost kernel: 0: [cf82e080] link (0f82e100) e0 Stalled > CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=0f1d10a0) > Mar 6 13:10:22 localhost kernel: 1: [cf82e100] link (00000001) e3 IOC Active > Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=69(IN) (buf=00000000) > Mar 6 13:10:22 localhost kernel: > Mar 6 13:10:22 localhost kernel: [cf3a92a0] link (0f3a91e2) element (0f82e0c0) > Mar 6 13:10:22 localhost kernel: 0: [cf82e0c0] link (0f82e140) e0 Stalled > CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=0f1d10a0) > Mar 6 13:10:22 localhost kernel: 1: [cf82e140] link (00000001) e3 IOC Active > Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=69(IN) (buf=00000000) > Mar 6 13:10:22 localhost kernel: > Mar 6 13:10:22 localhost kernel: [cf3a92a0] link (0f3a91e2) element (0f82e0c0) > Mar 6 13:10:22 localhost kernel: 0: [cf82e0c0] link (0f82e100) e0 Stalled > CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=0f1d10a0) > Mar 6 13:10:22 localhost kernel: 1: [cf82e100] link (00000001) e3 IOC Active > Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=69(IN) (buf=00000000) > Mar 6 13:10:22 localhost kernel: > Mar 6 13:10:22 localhost kernel: [cf3a9270] link (0f3a91e2) element (0f82e080) > Mar 6 13:10:22 localhost kernel: 0: [cf82e080] link (0f82e140) e0 Stalled > CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=0f1d10a0) > Mar 6 13:10:22 localhost kernel: 1: [cf82e140] link (00000001) e3 IOC Active > Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=69(IN) (buf=00000000) > Mar 6 13:10:22 localhost kernel: > Mar 6 13:10:22 localhost kernel: drivers/usb/core/usb.c: registered new driver > usb-storage > Mar 6 13:10:22 localhost kernel: USB Mass Storage support registered. > --- end /var/log/messages --- > > > On Wed, 3 Mar 2004, Matthew Dharm wrote: > > > About the only thing I can suggest is this: > > > > Located the entry for 0x4e6/0x0101 in drivers/usb/storage/unusual_devs.h > > and change the US_PR_CB to US_PR_BULK and see if that makes a difference. > > > > Other than that, I don't know what else to say... > > > > Matt > > > > On Tue, Mar 02, 2004 at 10:50:42PM -0500, Kipp Cannon wrote: > > > Oooo... sounds bad :-P. Here's /proc/usb/devices > > > > > > -Kipp > > > > > > --- begin devices --- > > > > > > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > > > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > > > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > > P: Vendor=0000 ProdID=0000 Rev= 2.06 > > > S: Manufacturer=Linux 2.6.3 uhci_hcd > > > S: Product=UHCI Host Controller > > > S: SerialNumber=0000:00:1d.1 > > > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > > > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > > > > > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > > > B: Alloc= 93/900 us (10%), #Int= 1, #Iso= 0 > > > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > > P: Vendor=0000 ProdID=0000 Rev= 2.06 > > > S: Manufacturer=Linux 2.6.3 uhci_hcd > > > S: Product=UHCI Host Controller > > > S: SerialNumber=0000:00:1d.0 > > > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > > > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > > > > > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 > > > D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > > > P: Vendor=04e6 ProdID=0101 Rev= 2.00 > > > S: Manufacturer=SCM Microsystems Inc. > > > S: Product=eUSB ATA / ATAPI Adapter > > > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > > > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb-storage > > > E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=32ms > > > > > > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 2 Spd=1.5 MxCh= 0 > > > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > > P: Vendor=046d ProdID=c00e Rev=11.10 > > > S: Manufacturer=Logitech > > > S: Product=USB-PS/2 Optical Mouse > > > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid > > > E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms > > > --- end devices --- > > > > > > On Tue, 2 Mar 2004, Matthew Dharm wrote: > > > > > > > Wow... there isn't a single command in here which actually worked. > > > > > > > > Tho, it's nice to see that the code we've got is pretty bulletproof with > > > > really bogus devices (many thanks to Alan Stern who really worked on a lot > > > > of that). > > > > > > > > What does /proc/bus/usb/devices show when the unit is attached? > > > > > > > > Matt > > > > > > > > On Tue, Mar 02, 2004 at 01:24:04PM -0500, Kipp Cannon wrote: > > > > > Hi, > > > > > > > > > > OK, I've recompiled with verbose debugging enabled, rebooted the system, > > > > > plugged in the drive and attempted to mount the disk that's in it. The > > > > > following is the entire output of dmesg following the (failed) mount > > > > > attempt. I decided not to second guess what it is that you need from > > > > > this, so I've just included the whole thing. (/var/log/messages has the > > > > > same stuff as before in it) > > > > > > > > > > -Kipp > > > > > > > > > > --- begin dmesg.log --- > > > > > TCP: Hash tables configured (established 16384 bind 32768) > > > > > NET: Registered protocol family 1 > > > > > NET: Registered protocol family 17 > > > > > ACPI: (supports S0 S3 S4 S5) > > > > > kjournald starting. Commit interval 5 seconds > > > > > EXT3-fs: mounted filesystem with ordered data mode. > > > > > VFS: Mounted root (ext3 filesystem) readonly. > > > > > Freeing unused kernel memory: 140k freed > > > > > Adding 2096472k swap on /dev/hda2. Priority:-1 extents:1 > > > > > EXT3 FS on hda1, internal journal > > > > > Linux Kernel Card Services > > > > > options: [pci] [cardbus] [pm] > > > > > Yenta: CardBus bridge found at 0000:01:05.0 [107b:1450] > > > > > Yenta: ISA IRQ mask 0x0898, PCI irq 10 > > > > > Socket status: 30000007 > > > > > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) > > > > > Uniform CD-ROM driver Revision: 3.20 > > > > > inserting floppy driver for 2.6.3 > > > > > Floppy drive(s): fd0 is 1.44M > > > > > FDC 0 is a National Semiconductor PC87306 > > > > > Linux agpgart interface v0.100 (c) Dave Jones > > > > > agpgart: Detected an Intel 830M Chipset. > > > > > agpgart: Maximum main memory to use for agp memory: 202M > > > > > agpgart: Detected 892K stolen memory. > > > > > agpgart: AGP aperture is 128M @ 0xe8000000 > > > > > mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x80000 > > > > > [drm] Initialized i830 1.3.2 20021108 on minor 0 > > > > > parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] > > > > > parport0: irq 7 detected > > > > > parport0: cpp_daisy: aa5500ff(38) > > > > > parport0: assign_addrs: aa5500ff(38) > > > > > parport0: cpp_daisy: aa5500ff(38) > > > > > parport0: assign_addrs: aa5500ff(38) > > > > > lp0: using parport0 (polling). > > > > > Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled > > > > > ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > > > > > PCI: Enabling device 0000:00:1f.6 (0000 -> 0001) > > > > > input: PS/2 Generic Mouse on isa0060/serio1 > > > > > input: PC Speaker > > > > > PCI: Setting latency timer of device 0000:01:03.0 to 64 > > > > > Intel(R) PRO/100 Network Driver - version 2.3.36-k1 > > > > > Copyright (c) 2003 Intel Corporation > > > > > > > > > > PCI: Setting latency timer of device 0000:01:08.0 to 64 > > > > > e100: selftest OK. > > > > > e100: eth0: Intel(R) PRO/100 Network Connection > > > > > Hardware receive checksums enabled > > > > > > > > > > drivers/usb/core/usb.c: registered new driver usbfs > > > > > drivers/usb/core/usb.c: registered new driver hub > > > > > drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver > > > > > v2.1 > > > > > uhci_hcd 0000:00:1d.0: UHCI Host Controller > > > > > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > > > > > uhci_hcd 0000:00:1d.0: irq 10, io base 00001840 > > > > > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 > > > > > drivers/usb/host/uhci-hcd.c: detected 2 ports > > > > > uhci_hcd 0000:00:1d.0: root hub device address 1 > > > > > usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 > > > > > drivers/usb/core/message.c: USB device number 1 default language ID 0x409 > > > > > usb usb1: Product: UHCI Host Controller > > > > > usb usb1: Manufacturer: Linux 2.6.3 uhci_hcd > > > > > usb usb1: SerialNumber: 0000:00:1d.0 > > > > > drivers/usb/core/usb.c: usb_hotplug > > > > > usb usb1: registering 1-0:1.0 (config #1, interface 0) > > > > > drivers/usb/core/usb.c: usb_hotplug > > > > > hub 1-0:1.0: usb_probe_interface > > > > > hub 1-0:1.0: usb_probe_interface - got id > > > > > hub 1-0:1.0: USB hub found > > > > > hub 1-0:1.0: 2 ports detected > > > > > hub 1-0:1.0: standalone hub > > > > > hub 1-0:1.0: ganged power switching > > > > > hub 1-0:1.0: global over-current protection > > > > > hub 1-0:1.0: Port indicators are not supported > > > > > hub 1-0:1.0: power on to power good time: 2ms > > > > > hub 1-0:1.0: hub controller current requirement: 0mA > > > > > hub 1-0:1.0: local power source is good > > > > > hub 1-0:1.0: no over-current condition exists > > > > > hub 1-0:1.0: enabling power on all ports > > > > > uhci_hcd 0000:00:1d.1: UHCI Host Controller > > > > > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > > > > > uhci_hcd 0000:00:1d.1: irq 10, io base 00001860 > > > > > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 > > > > > drivers/usb/host/uhci-hcd.c: detected 2 ports > > > > > uhci_hcd 0000:00:1d.1: root hub device address 1 > > > > > usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 > > > > > drivers/usb/core/message.c: USB device number 1 default language ID 0x409 > > > > > usb usb2: Product: UHCI Host Controller > > > > > usb usb2: Manufacturer: Linux 2.6.3 uhci_hcd > > > > > usb usb2: SerialNumber: 0000:00:1d.1 > > > > > drivers/usb/core/usb.c: usb_hotplug > > > > > usb usb2: registering 2-0:1.0 (config #1, interface 0) > > > > > drivers/usb/core/usb.c: usb_hotplug > > > > > hub 2-0:1.0: usb_probe_interface > > > > > hub 2-0:1.0: usb_probe_interface - got id > > > > > hub 2-0:1.0: USB hub found > > > > > hub 2-0:1.0: 2 ports detected > > > > > hub 2-0:1.0: standalone hub > > > > > hub 2-0:1.0: ganged power switching > > > > > hub 2-0:1.0: global over-current protection > > > > > hub 2-0:1.0: Port indicators are not supported > > > > > hub 2-0:1.0: power on to power good time: 2ms > > > > > hub 2-0:1.0: hub controller current requirement: 0mA > > > > > hub 2-0:1.0: local power source is good > > > > > hub 2-0:1.0: no over-current condition exists > > > > > hub 2-0:1.0: enabling power on all ports > > > > > hub 1-0:1.0: port 2, status 301, change 1, 1.5 Mb/s > > > > > hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x301 > > > > > usb 1-2: new low speed USB device using address 2 > > > > > usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 > > > > > drivers/usb/core/message.c: USB device number 2 default language ID 0x409 > > > > > usb 1-2: Product: USB-PS/2 Optical Mouse > > > > > usb 1-2: Manufacturer: Logitech > > > > > drivers/usb/core/usb.c: usb_hotplug > > > > > usb 1-2: registering 1-2:1.0 (config #1, interface 0) > > > > > drivers/usb/core/usb.c: usb_hotplug > > > > > drivers/usb/host/uhci-hcd.c: 1860: suspend_hc > > > > > e100: eth0 NIC Link is Up 10 Mbps Half duplex > > > > > cs: IO port probe 0x0c00-0x0cff: clean. > > > > > cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x80f > > > > > cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x4d0-0x4d7 > > > > > cs: IO port probe 0x0a00-0x0aff: clean. > > > > > NET: Registered protocol family 10 > > > > > Disabled Privacy Extensions on device c02f7fe0(lo) > > > > > IPv6 over IPv4 tunneling driver > > > > > drivers/usb/core/usb.c: registered new driver hiddev > > > > > hid 1-2:1.0: usb_probe_interface > > > > > hid 1-2:1.0: usb_probe_interface - got id > > > > > input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on > > > > > usb-0000:00:1d.0-2 > > > > > drivers/usb/core/usb.c: registered new driver hid > > > > > drivers/usb/input/hid-core.c: v2.0:USB HID core driver > > > > > mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x80000 > > > > > atkbd.c: Unknown key released (translated set 2, code 0x7a on > > > > > isa0060/serio0). > > > > > atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. > > > > > atkbd.c: Unknown key released (translated set 2, code 0x7a on > > > > > isa0060/serio0). > > > > > atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. > > > > > eth0: no IPv6 routers present > > > > > hub 1-0:1.0: port 1, status 101, change 1, 12 Mb/s > > > > > hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 > > > > > usb 1-1: new full speed USB device using address 3 > > > > > usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 > > > > > drivers/usb/core/message.c: USB device number 3 default language ID 0x409 > > > > > usb 1-1: Product: eUSB ATA / ATAPI Adapter > > > > > usb 1-1: Manufacturer: SCM Microsystems Inc. > > > > > drivers/usb/core/usb.c: usb_hotplug > > > > > usb 1-1: registering 1-1:1.0 (config #1, interface 0) > > > > > drivers/usb/core/usb.c: usb_hotplug > > > > > SCSI subsystem initialized > > > > > Initializing USB Mass Storage driver... > > > > > usb-storage 1-1:1.0: usb_probe_interface > > > > > usb-storage 1-1:1.0: usb_probe_interface - got id > > > > > usb-storage: USB Mass Storage device detected > > > > > usb-storage: act_altsetting is 0, id_index is 27 > > > > > usb-storage: -- associate_dev > > > > > usb-storage: Vendor: Shuttle > > > > > usb-storage: Product: CD-RW Device > > > > > usb-storage: Transport: Control/Bulk > > > > > usb-storage: Protocol: 8020i > > > > > usb-storage: Endpoints: In: 0xc9d2e8f4 Out: 0xc9d2e8e0 Int: 0xc9d2e908 > > > > > (Period 32) > > > > > usb-storage: *** thread sleeping. > > > > > scsi0 : SCSI emulation for USB Mass Storage devices > > > > > usb-storage: queuecommand called > > > > > usb-storage: *** thread awakened. > > > > > usb-storage: Command INQUIRY (6 bytes) > > > > > usb-storage: 12 00 00 00 24 00 > > > > > usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 > > > > > len=12 > > > > > usb-storage: Status code 0; transferred 12/12 > > > > > usb-storage: -- transfer complete > > > > > usb-storage: Call to usb_stor_ctrl_transfer() returned 0 > > > > > usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes > > > > > usb-storage: Status code -32; transferred 0/36 > > > > > usb-storage: clearing endpoint halt for pipe 0xc0010380 > > > > > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82 len=0 > > > > > usb-storage: usb_stor_clear_halt: result = 0 > > > > > usb-storage: CB data stage result is 0x2 > > > > > usb-storage: -- CB transport device requiring auto-sense > > > > > usb-storage: Issuing auto-REQUEST_SENSE > > > > > usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 > > > > > len=12 > > > > > usb-storage: Status code 0; transferred 12/12 > > > > > usb-storage: -- transfer complete > > > > > usb-storage: Call to usb_stor_ctrl_transfer() returned 0 > > > > > usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes > > > > > usb-storage: Status code -32; transferred 0/18 > > > > > usb-storage: clearing endpoint halt for pipe 0xc0010380 > > > > > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82 len=0 > > > > > usb-storage: usb_stor_clear_halt: result = 0 > > > > > usb-storage: CB data stage result is 0x2 > > > > > usb-storage: -- Result from auto-sense is 0 > > > > > usb-storage: -- code: 0x0, key: 0x0, ASC: 0x0, ASCQ: 0x0 > > > > > usb-storage: (Unknown Key): (unknown ASC/ASCQ) > > > > > usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0 > > > > > usb-storage: scsi cmd done, result=0x0 > > > > > usb-storage: *** thread sleeping. > > > > > Vendor: Model: Rev: > > > > > Type: Direct-Access ANSI SCSI revision: 02 > > > > > usb-storage: queuecommand called > > > > > usb-storage: *** thread awakened. > > > > > usb-storage: Bad LUN (0:1) > > > > > usb-storage: scsi cmd done, result=0x40000 > > > > > usb-storage: *** thread sleeping. > > > > > usb-storage: queuecommand called > > > > > usb-storage: *** thread awakened. > > > > > usb-storage: Bad target number (1:0) > > > > > usb-storage: scsi cmd done, result=0x40000 > > > > > usb-storage: *** thread sleeping. > > > > > usb-storage: queuecommand called > > > > > usb-storage: *** thread awakened. > > > > > usb-storage: Bad target number (2:0) > > > > > usb-storage: scsi cmd done, result=0x40000 > > > > > usb-storage: *** thread sleeping. > > > > > usb-storage: queuecommand called > > > > > usb-storage: *** thread awakened. > > > > > usb-storage: Bad target number (3:0) > > > > > usb-storage: scsi cmd done, result=0x40000 > > > > > usb-storage: *** thread sleeping. > > > > > usb-storage: queuecommand called > > > > > usb-storage: *** thread awakened. > > > > > usb-storage: Bad target number (4:0) > > > > > usb-storage: scsi cmd done, result=0x40000 > > > > > usb-storage: *** thread sleeping. > > > > > usb-storage: queuecommand called > > > > > usb-storage: *** thread awakened. > > > > > usb-storage: Bad target number (5:0) > > > > > usb-storage: scsi cmd done, result=0x40000 > > > > > usb-storage: *** thread sleeping. > > > > > usb-storage: queuecommand called > > > > > usb-storage: *** thread awakened. > > > > > usb-storage: Bad target number (6:0) > > > > > usb-storage: scsi cmd done, result=0x40000 > > > > > usb-storage: *** thread sleeping. > > > > > usb-storage: queuecommand called > > > > > usb-storage: *** thread awakened. > > > > > usb-storage: Bad target number (7:0) > > > > > usb-storage: scsi cmd done, result=0x40000 > > > > > usb-storage: *** thread sleeping. > > > > > WARNING: USB Mass Storage data integrity not assured > > > > > USB Mass Storage device found at 3 > > > > > drivers/usb/core/usb.c: registered new driver usb-storage > > > > > USB Mass Storage support registered. > > > > > usb-storage: queuecommand called > > > > > usb-storage: *** thread awakened. > > > > > usb-storage: Command TEST_UNIT_READY (6 bytes) > > > > > usb-storage: 00 00 00 00 00 00 > > > > > usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 > > > > > len=12 > > > > > usb-storage: Status code 0; transferred 12/12 > > > > > usb-storage: -- transfer complete > > > > > usb-storage: Call to usb_stor_ctrl_transfer() returned 0 > > > > > usb-storage: -- CB transport device requiring auto-sense > > > > > usb-storage: Issuing auto-REQUEST_SENSE > > > > > usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 > > > > > len=12 > > > > > usb-storage: Status code 0; transferred 12/12 > > > > > usb-storage: -- transfer complete > > > > > usb-storage: Call to usb_stor_ctrl_transfer() returned 0 > > > > > usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes > > > > > usb-storage: Status code -32; transferred 0/18 > > > > > usb-storage: clearing endpoint halt for pipe 0xc0010380 > > > > > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82 len=0 > > > > > usb-storage: usb_stor_clear_halt: result = 0 > > > > > usb-storage: CB data stage result is 0x2 > > > > > usb-storage: -- Result from auto-sense is 0 > > > > > usb-storage: -- code: 0x0, key: 0x0, ASC: 0x0, ASCQ: 0x0 > > > > > usb-storage: (Unknown Key): (unknown ASC/ASCQ) > > > > > usb-storage: scsi cmd done, result=0x0 > > > > > usb-storage: *** thread sleeping. > > > > > usb-storage: queuecommand called > > > > > usb-storage: *** thread awakened. > > > > > usb-storage: Command READ_CAPACITY (10 bytes) > > > > > usb-storage: 25 00 00 00 00 00 00 00 00 00 > > > > > usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 > > > > > len=12 > > > > > usb-storage: Status code 0; transferred 12/12 > > > > > usb-storage: -- transfer complete > > > > > usb-storage: Call to usb_stor_ctrl_transfer() returned 0 > > > > > usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes > > > > > usb-storage: Status code -32; transferred 0/8 > > > > > usb-storage: clearing endpoint halt for pipe 0xc0010380 > > > > > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82 len=0 > > > > > usb-storage: usb_stor_clear_halt: result = 0 > > > > > usb-storage: CB data stage result is 0x2 > > > > > usb-storage: -- CB transport device requiring auto-sense > > > > > usb-storage: -- unexpectedly short transfer > > > > > usb-storage: Issuing auto-REQUEST_SENSE > > > > > usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 > > > > > len=12 > > > > > usb-storage: Status code 0; transferred 12/12 > > > > > usb-storage: -- transfer complete > > > > > usb-storage: Call to usb_stor_ctrl_transfer() returned 0 > > > > > usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes > > > > > usb-storage: Status code -32; transferred 0/18 > > > > > usb-storage: clearing endpoint halt for pipe 0xc0010380 > > > > > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82 len=0 > > > > > usb-storage: usb_stor_clear_halt: result = 0 > > > > > usb-storage: CB data stage result is 0x2 > > > > > usb-storage: -- Result from auto-sense is 0 > > > > > usb-storage: -- code: 0x0, key: 0x0, ASC: 0x0, ASCQ: 0x0 > > > > > usb-storage: (Unknown Key): (unknown ASC/ASCQ) > > > > > usb-storage: scsi cmd done, result=0x0 > > > > > usb-storage: *** thread sleeping. > > > > > sda : sector size 0 reported, assuming 512. > > > > > SCSI device sda: 1 512-byte hdwr sectors (0 MB) > > > > > sda: assuming drive cache: write through > > > > > sda:<7>usb-storage: queuecommand called > > > > > usb-storage: *** thread awakened. > > > > > usb-storage: Command READ_10 (10 bytes) > > > > > usb-storage: 28 00 00 00 00 00 00 00 01 00 > > > > > usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 > > > > > len=12 > > > > > usb-storage: Status code 0; transferred 12/12 > > > > > usb-storage: -- transfer complete > > > > > usb-storage: Call to usb_stor_ctrl_transfer() returned 0 > > > > > usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries > > > > > usb-storage: Status code -32; transferred 0/512 > > > > > usb-storage: clearing endpoint halt for pipe 0xc0010380 > > > > > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82 len=0 > > > > > usb-storage: usb_stor_clear_halt: result = 0 > > > > > usb-storage: CB data stage result is 0x2 > > > > > usb-storage: -- CB transport device requiring auto-sense > > > > > usb-storage: -- unexpectedly short transfer > > > > > usb-storage: Issuing auto-REQUEST_SENSE > > > > > usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 > > > > > len=12 > > > > > usb-storage: Status code 0; transferred 12/12 > > > > > usb-storage: -- transfer complete > > > > > usb-storage: Call to usb_stor_ctrl_transfer() returned 0 > > > > > usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes > > > > > usb-storage: Status code -32; transferred 0/18 > > > > > usb-storage: clearing endpoint halt for pipe 0xc0010380 > > > > > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82 len=0 > > > > > usb-storage: usb_stor_clear_halt: result = 0 > > > > > usb-storage: CB data stage result is 0x2 > > > > > usb-storage: -- Result from auto-sense is 0 > > > > > usb-storage: -- code: 0x0, key: 0x0, ASC: 0x0, ASCQ: 0x0 > > > > > usb-storage: (Unknown Key): (unknown ASC/ASCQ) > > > > > usb-storage: scsi cmd done, result=0x0 > > > > > usb-storage: *** thread sleeping. > > > > > unknown partition table > > > > > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 > > > > > attempt to access beyond end of device > > > > > sda: rw=0, want=66, limit=1 > > > > > isofs_fill_super: bread failed, dev=sda, iso_blknum=16, block=32 > > > > > --- end dmesg.log --- > > > > > > > > > > > > > > > On Tue, 2 Mar 2004, Matthew Dharm wrote: > > > > > > > > > > > The device is reporting Direct-Access type, when it should be reporting > > > > > > CD-ROM type. > > > > > > > > > > > > Looking at the logs you provided, actually, it looks like it barely can > > > > > > answer an INQUIRY at all. > > > > > > > > > > > > To get something like this working, you'd have to rewrite the INQUIRY > > > > > > response data to set the type to CD-ROM. Before we go down that path, > > > > > > rebuild the driver with USB Mass Storage Verbose Debug turned on so we can > > > > > > see if something is going wrong with the INQUIRY or (more likely) the > > > > > > device is just busted. > > > > > > > > > > > > Matt > > > > > > > > > > > > On Tue, Mar 02, 2004 at 01:18:29AM -0500, Kipp Cannon wrote: > > > > > > > Hi, > > > > > > > > > > > > > > I've got an external cd-rom drive branded a "Microtech MicroCD" that I'm > > > > > > > having trouble getting to work with Linux 2.6.3 (the only version I've > > > > > > > tried it with). The drive attaches to a USB port on the host machine > > > > > > > through a cable that, at the drive end, has what looks like a "VHDCI" > > > > > > > high-density SCSI connector but is only about half the size. > > > > > > > > > > > > > > usbview reports the drive as a "eUSB ATA/ATAPI adapter" manufactured by > > > > > > > "SCM Microsystems Inc." (vendor/product/rev = 04e6/0101/2.00). Some > > > > > > > searching on Google revealed that SCM Microsystems manufactured a > > > > > > > USB-ATAPI bridge cable that has been used to attach various ATAPI drives > > > > > > > to USB ports, in particular the HP 8200e/8210e CD-Writer Plus. > > > > > > > > > > > > > > I suppose that's what I've got: a parallel-port ATAPI drive that's been > > > > > > > retrofitted to work with USB ports. > > > > > > > > > > > > > > Anyway... > > > > > > > > > > > > > > When I plug in the drive, the usb subsystem loads a bunch of stuff and > > > > > > > sets the drive up on /dev/sda with the following being put in > > > > > > > /var/log/messages > > > > > > > > > > > > > > --- begin /var/log/messages --- > > > > > > > Feb 26 19:44:45 localhost kernel: usb 1-1: new full speed USB device > > > > > > > using address 3 > > > > > > > Feb 26 19:44:45 localhost kernel: SCSI subsystem initialized > > > > > > > Feb 26 19:44:45 localhost kernel: Initializing USB Mass Storage driver... > > > > > > > Feb 26 19:44:45 localhost kernel: scsi0 : SCSI emulation for USB Mass > > > > > > > Storage devices > > > > > > > Feb 26 19:44:45 localhost kernel: Vendor: Model: > > > > > > > Rev: > > > > > > > Feb 26 19:44:45 localhost kernel: Type: Direct-Access > > > > > > > ANSI SCSI revision: 02 > > > > > > > Feb 26 19:44:45 localhost kernel: drivers/usb/core/usb.c: registered new > > > > > > > driver usb-storage > > > > > > > Feb 26 19:44:45 localhost kernel: USB Mass Storage support registered. > > > > > > > Feb 26 19:44:45 localhost scsi.agent[4486]: disk at > > > > > > > /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/host0/0:0:0:0 > > > > > > > Feb 26 19:44:45 localhost kernel: sda : sector size 0 reported, assuming > > > > > > > 512. > > > > > > > Feb 26 19:44:45 localhost kernel: SCSI device sda: 1 512-byte hdwr > > > > > > > sectors (0 MB) > > > > > > > Feb 26 19:44:45 localhost kernel: sda:<7>usb-storage: queuecommand > > > > > > > called > > > > > > > Feb 26 19:44:45 localhost kernel: unknown partition table > > > > > > > Feb 26 19:44:45 localhost kernel: Attached scsi disk sda at scsi0, > > > > > > > channel 0, id 0, lun 0 > > > > > > > --- end /var/log/messages --- > > > > > > > > > > > > > > If I place a disk in the drive, when I try to mount it the attempt fails > > > > > > > with the following being placed in /var/log/messages: > > > > > > > > > > > > > > --- begin /var/log/messages --- > > > > > > > Feb 26 19:46:58 localhost kernel: attempt to access beyond end of device > > > > > > > Feb 26 19:46:58 localhost kernel: sda: rw=0, want=66, limit=1 > > > > > > > Feb 26 19:46:58 localhost kernel: isofs_fill_super: bread failed, > > > > > > > dev=sda, iso_blknum=16, block=32 > > > > > > > --- end /var/log/messages --- > > > > > > > > > > > > > > Does somewhat have some idea how to get this drive working? Thanks. > > > > > > > > > > > > > > -Kipp > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > > > > SF.Net is sponsored by: Speed Start Your Linux Apps Now. > > > > > > > Build and deploy apps & Web services for Linux with > > > > > > > a free DVD software kit from IBM. Click Now! > > > > > > > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > > > > > > > _______________________________________________ > > > > > > > [EMAIL PROTECTED] > > > > > > > To unsubscribe, use the last form field at: > > > > > > > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > > > > > > > > > > > > -- > > > > > > Matthew Dharm Home: [EMAIL PROTECTED] > > > > > > Maintainer, Linux USB Mass Storage Driver > > > > > > > > > > > > A: The most ironic oxymoron wins ... > > > > > > DP: "Microsoft Works" > > > > > > A: Uh, okay, you win. > > > > > > -- A.J. & Dust Puppy > > > > > > User Friendly, 1/18/1998 > > > > > > > > > > > > > > -- > > > > Matthew Dharm Home: [EMAIL PROTECTED] > > > > Maintainer, Linux USB Mass Storage Driver > > > > > > > > Okay, this isn't funny anymore! Let me down! I'll tell Bill on you!! > > > > -- Microsoft Salesman > > > > User Friendly, 4/1/1998 > > > > > > > > -- > > Matthew Dharm Home: [EMAIL PROTECTED] > > Maintainer, Linux USB Mass Storage Driver > > > > It's monday. It must be monday. > > -- Greg > > User Friendly, 5/4/1998 > > -- Matthew Dharm Home: [EMAIL PROTECTED] Maintainer, Linux USB Mass Storage Driver G: Let me guess, you started on the 'net with AOL, right? C: WOW! d00d! U r leet! -- Greg and Customer User Friendly, 2/12/1999
pgp00000.pgp
Description: PGP signature
