uhci_hcd 0000:00:1f.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: irq 10, io base 0000ef80
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: detected 2 ports
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: default language 0x0409
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.7-1.492custom uhci_hcd
usb usb1: SerialNumber: 0000:00:1f.2
usb usb1: hotplug
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 2ms
hub 1-0:1.0: local power source is good
uhci_hcd 0000:00:1f.2: port 1 portsc 01a3
hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
usb 1-1: new low speed USB device using address 2
usb 1-1: skipped 1 descriptor after interface
usb 1-1: new device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-1: default language 0x0409
usb 1-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 1-1: Manufacturer: Microsoft
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug
usbhid 1-1:1.0: usb_probe_interface
usbhid 1-1:1.0: usb_probe_interface - got id
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1f.2-1
uhci_hcd 0000:00:1f.2: port 2 portsc 0093
hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
usb 1-2: new full speed USB device using address 3
usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: default language 0x0409
usb 1-2: Product: FHD-Classic
usb 1-2: Manufacturer: Freecom Technologies
usb 1-2: SerialNumber: 100000000000000002927
usb 1-2: hotplug
usb 1-2: adding 1-2:1.0 (config #1, interface 0)
usb 1-2:1.0: hotplug
Adding 1020088k swap on /dev/hdb1. Priority:-1 extents:1
Adding 409616k swap on /dev/hda5. Priority:-2 extents:1
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usb-storage 1-2:1.0: usb_probe_interface
usb-storage 1-2:1.0: usb_probe_interface - got id
usb-storage: USB Mass Storage device detected
usb-storage: altsetting is 0, id_index is 122
usb-storage: -- associate_dev
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-2: control timeout on ep0in
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[18f02240] link (16f021e2) element (172f3180)
0: [192f3180] link (172f31c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=16cb04a0)
1: [192f31c0] link (172f3200) e3 SPD Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2d80)
2: [192f3200] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[18f02270] link (16f021e2) element (172f3000)
0: [192f3000] link (172f3040) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=16cb04a0)
1: [192f3040] link (172f3080) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2d80)
2: [192f3080] link (172f30c0) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2dc0)
3: [192f30c0] link (172f3100) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2e00)
4: [192f3100] link (172f3140) e3 SPD Active Length=0 MaxLen=3e DT0 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2e40)
5: [192f3140] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[18f02240] link (16f021e2) element (172f3180)
0: [192f3180] link (172f31c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=16cb04a0)
1: [192f31c0] link (172f3200) e3 SPD Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2d80)
2: [192f3200] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[18f02270] link (16f021e2) element (172f3000)
0: [192f3000] link (172f3040) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=16cb04a0)
1: [192f3040] link (172f3080) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2d80)
2: [192f3080] link (172f30c0) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2dc0)
3: [192f30c0] link (172f3100) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2e00)
4: [192f3100] link (172f3140) e3 SPD Active Length=0 MaxLen=3e DT0 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2e40)
5: [192f3140] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[18f02240] link (16f021e2) element (172f3180)
0: [192f3180] link (172f31c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=16cb04a0)
1: [192f31c0] link (172f3200) e3 SPD Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2d80)
2: [192f3200] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: Endpoints: In: 0x18865d34 Out: 0x18865d20 Int: 0x00000000 (Period 0)
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[18f02270] link (16f021e2) element (172f3000)
0: [192f3000] link (172f3040) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=16fd9040)
1: [192f3040] link (172f3080) e3 SPD Active Length=0 MaxLen=0 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=1732f180)
2: [192f3080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
usb-storage: GetMaxLUN command result is -71, data is 0 usb-storage: storage_probe() failed usb-storage: -- usb_stor_release_resources usb-storage: -- dissociate_dev usb-storage: probe of 1-2:1.0 failed with error -1 usbcore: registered new driver usb-storage USB Mass Storage support registered.
uhci_hcd 0000:00:1f.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: irq 10, io base 0000ef80
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: detected 2 ports
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: default language 0x0409
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.7-1.492custom uhci_hcd
usb usb1: SerialNumber: 0000:00:1f.2
usb usb1: hotplug
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 2ms
hub 1-0:1.0: local power source is good
uhci_hcd 0000:00:1f.2: port 1 portsc 01a3
hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
usb 1-1: new low speed USB device using address 2
usb 1-1: skipped 1 descriptor after interface
usb 1-1: new device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-1: default language 0x0409
usb 1-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 1-1: Manufacturer: Microsoft
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug
usbhid 1-1:1.0: usb_probe_interface
usbhid 1-1:1.0: usb_probe_interface - got id
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1f.2-1
uhci_hcd 0000:00:1f.2: port 2 portsc 0093
hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
usb 1-2: new full speed USB device using address 3
usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: default language 0x0409
usb 1-2: Product: FHD-Classic
usb 1-2: Manufacturer: Freecom Technologies
usb 1-2: SerialNumber: 100000000000000002927
usb 1-2: hotplug
usb 1-2: adding 1-2:1.0 (config #1, interface 0)
usb 1-2:1.0: hotplug
Adding 1020088k swap on /dev/hdb1. Priority:-1 extents:1
Adding 409616k swap on /dev/hda5. Priority:-2 extents:1
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usb-storage 1-2:1.0: usb_probe_interface
usb-storage 1-2:1.0: usb_probe_interface - got id
usb-storage: USB Mass Storage device detected
usb-storage: altsetting is 0, id_index is 122
usb-storage: -- associate_dev
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-2: control timeout on ep0in
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[18f02240] link (16f021e2) element (172f3180)
0: [192f3180] link (172f31c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=16cb04a0)
1: [192f31c0] link (172f3200) e3 SPD Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2d80)
2: [192f3200] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[18f02270] link (16f021e2) element (172f3000)
0: [192f3000] link (172f3040) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=16cb04a0)
1: [192f3040] link (172f3080) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2d80)
2: [192f3080] link (172f30c0) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2dc0)
3: [192f30c0] link (172f3100) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2e00)
4: [192f3100] link (172f3140) e3 SPD Active Length=0 MaxLen=3e DT0 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2e40)
5: [192f3140] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[18f02240] link (16f021e2) element (172f3180)
0: [192f3180] link (172f31c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=16cb04a0)
1: [192f31c0] link (172f3200) e3 SPD Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2d80)
2: [192f3200] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[18f02270] link (16f021e2) element (172f3000)
0: [192f3000] link (172f3040) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=16cb04a0)
1: [192f3040] link (172f3080) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2d80)
2: [192f3080] link (172f30c0) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2dc0)
3: [192f30c0] link (172f3100) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2e00)
4: [192f3100] link (172f3140) e3 SPD Active Length=0 MaxLen=3e DT0 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2e40)
5: [192f3140] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[18f02240] link (16f021e2) element (172f3180)
0: [192f3180] link (172f31c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=16cb04a0)
1: [192f31c0] link (172f3200) e3 SPD Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=17fa2d80)
2: [192f3200] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: Endpoints: In: 0x18865d34 Out: 0x18865d20 Int: 0x00000000 (Period 0)
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[18f02270] link (16f021e2) element (172f3000)
0: [192f3000] link (172f3040) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=16fd9040)
1: [192f3040] link (172f3080) e3 SPD Active Length=0 MaxLen=0 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=1732f180)
2: [192f3080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)
usb-storage: GetMaxLUN command result is -71, data is 0 usb-storage: storage_probe() failed usb-storage: -- usb_stor_release_resources usb-storage: -- dissociate_dev usb-storage: probe of 1-2:1.0 failed with error -1 usbcore: registered new driver usb-storage USB Mass Storage support registered.
------------------------------------------------------- This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools! Get your free copy of BEA WebLogic Workshop 8.1 today. http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
