Hello,
Alan Stern wrote:
> Yes, that's what I meant. The examples you posted from your log show
> everything working correctly. You need to find a part of the log that was
> made when the tape drive stopped working.
I got it after running the test for 35 hours! I provide the core
part of the log below and attach more logs to this email as ZIP
archives. I hope this helps us much.
Could you advise me where to proceed next? I am keeping the test
machines as is, so that I can provide other logs. Also, if I should
enable other debug options, I will try it happily.
-------- begin "dmesg" --------
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command WRITE_6 (6 bytes)
usb-storage: 0a 01 00 00 40 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x6e738 Trg 0 LUN 0 L 32768 F 0
CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 32768 bytes
usb-storage: command_abort() called
usb-storage: usb_stor_bulk_msg() returned -104 xferred 0/32768
usb-storage: usb_stor_transfer_partial(): transfer aborted
usb-storage: Bulk data transfer result 0x3
usb-storage: -- transport indicates command was aborted
usb-storage: Bulk reset requested
usb-storage: usb_stor_clear_halt: result=0
usb-storage: usb_stor_clear_halt: result=0
usb-storage: Bulk soft reset completed
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x6e739 Trg 0 LUN 0 L 0 F 0 CL
6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x6e739 R 0 Stat 0x2
usb-storage: -- transport indicates error, resetting
usb-storage: Bulk reset requested
usb-storage: usb_stor_clear_halt: result=0
usb-storage: usb_stor_clear_halt: result=0
usb-storage: Bulk soft reset completed
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: device_reset() called
usb-storage: Bulk reset requested
usb-storage: usb_stor_clear_halt: result=0
usb-storage: usb_stor_clear_halt: result=0
usb-storage: Bulk soft reset completed
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x6e73a Trg 0 LUN 0 L 0 F 0 CL
6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x6e73a R 0 Stat 0x2
usb-storage: -- transport indicates error, resetting
usb-storage: Bulk reset requested
usb-storage: usb_stor_clear_halt: result=0
usb-storage: usb_stor_clear_halt: result=0
usb-storage: Bulk soft reset completed
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: bus_reset() called
usb-storage: Examinging driver usb-storage...skipping ourselves.
usb-storage: bus_reset() complete
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x6e73b Trg 0 LUN 0 L 0 F 0 CL
6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x6e73b R 0 Stat 0x2
usb-storage: -- transport indicates error, resetting
usb-storage: Bulk reset requested
usb-storage: usb_stor_clear_halt: result=0
usb-storage: usb_stor_clear_halt: result=0
usb-storage: Bulk soft reset completed
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
scsi: device set offline - not ready or command retry failed after bus
reset: host 1 channel 0 id 0 lun 0
st0: Error 70000 (sugg. bt 0x0, driver bt 0x0, host bt 0x7).
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command WRITE_FILEMARKS (6 bytes)
usb-storage: 10 00 00 00 01 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x6e73c Trg 0 LUN 0 L 0 F 0 CL
6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x6e73c R 0 Stat 0x2
usb-storage: -- transport indicates error, resetting
usb-storage: Bulk reset requested
usb-storage: usb_stor_clear_halt: result=0
usb-storage: usb_stor_clear_halt: result=0
usb-storage: Bulk soft reset completed
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
st0: Error 70000 (sugg. bt 0x0, driver bt 0x0, host bt 0x7).
st0: Error on write filemark.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command REZERO_UNIT (6 bytes)
usb-storage: 01 00 00 00 00 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x6e73d Trg 0 LUN 0 L 0 F 0 CL
6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x6e73d R 0 Stat 0x2
usb-storage: -- transport indicates error, resetting
usb-storage: Bulk reset requested
usb-storage: usb_stor_clear_halt: result=0
usb-storage: usb_stor_clear_halt: result=0
usb-storage: Bulk soft reset completed
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
st0: Error 70000 (sugg. bt 0x0, driver bt 0x0, host bt 0x7).
-------- end "dmesg" --------
-------- begin "shell script tested" --------
#!/bin/sh
while true; do
echo `date`: tar...
tar cf /dev/st0 -C / lib
if [ $? != 0 ]
then
echo "tar failed"
exit 1
fi
echo `date`: sleep 5 minutes...
sleep 300
echo `date`: mt...
mt -f /dev/st0 status
if [ $? != 0 ]
then
echo "mt failed"
exit 2
fi
echo `date`: sleep 10 minutes...
sleep 600
done
-------- end "shell script tested" --------
-------- begin "log from test script" --------
Fri Jul 23 00:45:11 JST 2004: sleep 10 minutes...
Fri Jul 23 00:55:11 JST 2004: tar...
Fri Jul 23 00:57:15 JST 2004: sleep 5 minutes...
Fri Jul 23 01:02:15 JST 2004: mt...
SCSI 2 tape drive:
File number=0, block number=0, partition=0.
Tape block size 512 bytes. Density code 0x30 (AIT-1 or MLR3).
Soft error count since last status=0
General status bits on (41010000):
BOT ONLINE IM_REP_EN
Fri Jul 23 01:02:15 JST 2004: sleep 10 minutes...
Fri Jul 23 01:12:15 JST 2004: tar...
tar: /dev/st0: Wrote only 0 of 10240 bytes
tar: Error is not recoverable: exiting now
tar failed
-------- end "log from test script" --------
Regards,
Takashi Yoshida
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
