On Thu, 4 Nov 2004, Dirk Kosch�tzki wrote: > Hello, > > I have "the usual problem" with a Genesys USB-to-IDE controller. I have an > external case with this controller and a (new) ide hd inside the box. If I > try to copy from the external disk to the internal disks (or /dev/null) > then errors occur. I already tried the tricks from the FAQ and applied a > patch but nothings helps. :-( > > Some more details: > > Setup: Debian with Kernel 2.6.8. > lsusb-output: see attachment > > ERROR (from dmesg): > > SCSI error : <3 0 0 0> return code = 0x8000002 > Current sda: sense key Hardware Error > Additional sense: Data phase error > end_request: I/O error, dev sda, sector 43765808 > Buffer I/O error on device sda, logical block 5470726 > > [ Of course the block differs all the time, therefore a hw defect is > unlikely. I also switched to a different cable with no success. ]
Sorry, but this is not "the usual problem". And a hardware defect is not so unlikely as you think. Andre Steinert has reported this same problem. Follow the thread named "Data phase error not solved in 2.6.9-final" in http://marc.theaimsgroup.com/?t=109800812500001&r=1&w=2 and http://marc.theaimsgroup.com/?t=109809253700003&r=1&w=2 > So: What options are available to get the system working?? Nobody knows. You could try getting in touch with technical support at Genesys Logic. > A (possible) different problem: The system does not boot if the usb device > is > connected. It hangs during booting. I even cannot use the power off > button, only > reset works (no sysreq or num lock). > > Any help is greatly appreciated. Make sure that Legacy USB support is turned off in the computer's BIOS. Try running 2.6.10-rc1. Alan Stern ------------------------------------------------------- This SF.Net email is sponsored by: Sybase ASE Linux Express Edition - download now for FREE LinuxWorld Reader's Choice Award Winner for best database on Linux. http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
