Hi,
I got this generic VIA USB2/Firewire combo card (according to the FAQ,
these have some issues). With 2.6.12.1, when I insert the card
everything seems to be setup okay, but inserting a bus-powered device
triggers no event and the device is not powered on. Inserting a hub and
then connecting the device to the hub, the "active" light on the hub
remains in the "inactive" state. Included with the card was a
USB->power plug which I believe is intended to supply power from a hub
to the card, but inserting or removing it makes no difference.
I have attached the dmesg. The card was inserted at boot, then the
device (a SM reader) inserted, then I manually inserted usb-storage, and
then having no effect, I removed the card generating strange messages but
leaving me with a usable system at least, and then inserted a 16-bit ethernet
card which I'm using to post this. The 'nobody cared' IRQ always
happens when I remove a card, it's a bug in the yenta driver related to
Toshiba as far as I know.
Thanks.
Linux version 2.6.12.1 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian
1:3.3.5-13)) #6 Sat Jul 9 02:24:53 CDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000009020000 (usable)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
144MB LOWMEM available.
On node 0 totalpages: 36896
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 32800 pages, LIFO batch:15
HighMem zone: 0 pages, LIFO batch:1
DMI not present.
ACPI: Unable to locate RSDP
Allocating PCI resources starting at 09100000 (gap: 09020000:f6fc0000)
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro
No local APIC present or hardware disabled
mapped APIC to ffffd000 (01121000)
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 120.032 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 138780k/147584k available (1401k kernel code, 8272k reserved, 795k
data, 228k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 233.47 BogoMIPS (lpj=116736)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 000001bf 00000000 00000000 00000000 00000000
00000000 00000000
CPU: After vendor identify, caps: 000001bf 00000000 00000000 00000000 00000000
00000000 00000000
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After all inits, caps: 000001bf 00000000 00000000 00000000 00000000
00000000 00000000
CPU: Intel Pentium 75 - 200 stepping 0c
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like
an initrd
Freeing initrd memory: 4264k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd50e, last bus=21
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f8dd0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9aa6, dseg 0x0
PnPBIOS: 20 nodes reported by PnP BIOS; 20 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:04.0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 8
NET: Registered protocol family 20
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4264KiB [1 disk] into ram disk...
|/-\|/-\|/-\|/-\|/-<6>input: AT Translated Set 2 keyboard on
isa0060/serio0
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 228k freed
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: FUJITSU MHH2048AT, ATA DISK drive
Probing IDE interface ide1...
hdc: TOSHIBA CD-ROM XM-1502BN, ATAPI CD/DVD-ROM drive
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 9514260 sectors (4871 MB) w/512KiB Cache, CHS=10068/15/63
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 130532
ext3_orphan_cleanup: deleting unreferenced inode 130506
EXT3-fs: hda1: 2 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 460204k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
hdc: ATAPI 10X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
Real Time Clock Driver v1.12
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
Toshiba System Managment Mode driver v1.11 26/9/2001
register_blkdev: cannot get major 31 for mtdblock
Unable to register mtdblock block device on major 31: -16
slram: devname=ram_uncached, devstart=0x4000000, devlength=0x5000000
slram: ioremap failed
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Enabling device 0000:00:02.0 (0004 -> 0006)
Yenta: CardBus bridge found at 0000:00:02.0 [0000:0000]
Yenta: ISA IRQ mask 0x0000, PCI irq 11
Socket status: 30000006
PCI: Enabling device 0000:00:02.1 (0004 -> 0006)
Yenta: CardBus bridge found at 0000:00:02.1 [0000:0000]
Yenta: ISA IRQ mask 0x0000, PCI irq 11
Socket status: 30000020
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Enabling device 0000:05:00.2 (0000 -> 0002)
ehci_hcd 0000:05:00.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:05:00.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:05:00.2: irq 11, io mem 0x0a000a00
ehci_hcd 0000:05:00.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.2
PCI: Enabling device 0000:05:00.0 (0000 -> 0003)
uhci_hcd 0000:05:00.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:05:00.0: irq 11, io base 0x00004880
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Enabling device 0000:05:00.1 (0000 -> 0003)
uhci_hcd 0000:05:00.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(#2)
uhci_hcd 0000:05:00.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:05:00.1: irq 11, io base 0x000048a0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1250 $ Ben Collins <[EMAIL PROTECTED]>
PCI: Enabling device 0000:05:00.3 (0080 -> 0083)
PCI: Setting latency timer of device 0000:05:00.3 to 64
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[a000000-a0007ff] Max
Packet=[1024]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011060000003280]
eth1394: $Rev: 1247 $ Ben Collins <[EMAIL PROTECTED]>
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
NET: Registered protocol family 17
input: PC Speaker
input: PS/2 Generic Mouse on isa0060/serio1
ts: Compaq touchscreen protocol output
mice: PS/2 mouse device common for all mice
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
irda_init()
NET: Registered protocol family 23
NET: Registered protocol family 4
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xef
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xe3
cs: IO port probe 0x100-0x4ff: excluding 0x120-0x127 0x220-0x22f 0x388-0x38f 0x4
80-0x48f 0x4d0-0x4d7
cs: IO port probe 0x100-0x4ff: excluding 0x120-0x127 0x220-0x22f 0x388-0x38f 0x4
80-0x48f 0x4d0-0x4d7
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02f1480(lo)
IPv6 over IPv4 tunneling driver
Disabled Privacy Extensions on device c1352000(sit0)
openafs: module license 'unspecified' taints kernel.
openafs: no version for "sys_close" found: kernel tainted.
Found system call table at 0xc02a293c (pattern scan)
Starting AFS cache scan...old style would have needed 1064000 contiguous bytes
found 24 non-empty cache files (0%).
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ehci_hcd 0000:05:00.2: HC died; cleaning up
uhci_hcd 0000:05:00.0: host system error, PCI problems?
uhci_hcd 0000:05:00.0: host controller process error, something bad happened!
uhci_hcd 0000:05:00.1: host system error, PCI problems?
uhci_hcd 0000:05:00.1: host controller process error, something bad happened!
uhci_hcd 0000:05:00.0: remove, state 1
usb usb2: USB disconnect, address 1
hub 3-0:1.0: over-current change on port 1
uhci_hcd 0000:05:00.0: USB bus 2 deregistered
uhci_hcd 0000:05:00.1: remove, state 1
hub 3-0:1.0: hub_port_status failed (err = -19)
hub 3-0:1.0: connect-debounce failed, port 1 disabled
hub 3-0:1.0: cannot disable port 1 (err = -19)
hub 3-0:1.0: hub_port_status failed (err = -19)
usb usb3: USB disconnect, address 1
uhci_hcd 0000:05:00.1: USB bus 3 deregistered
ehci_hcd 0000:05:00.2: remove, state 0
usb usb1: USB disconnect, address 1
ehci_hcd 0000:05:00.2: USB bus 1 deregistered
ieee1394: Node removed: ID:BUS[0-00:1023] GUID[0011060000003280]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
cs: memory probe 0x0d0000-0x0dffff: clean.
irq 11: nobody cared!
[<c012aea9>] __report_bad_irq+0x31/0x77
[<c012af53>] note_interrupt+0x4c/0x71
[<c012ab6b>] __do_IRQ+0x84/0xad
[<c0104d41>] do_IRQ+0x19/0x24
[<c0103966>] common_interrupt+0x1a/0x20
[<c0118110>] __do_softirq+0x2c/0x7d
[<c0118183>] do_softirq+0x22/0x26
[<c0104d46>] do_IRQ+0x1e/0x24
[<c0103966>] common_interrupt+0x1a/0x20
[<c019dfd7>] pci_bus_write_config_word+0x32/0x39
[<ca1c1500>] yenta_set_socket+0x154/0x171 [yenta_socket]
[<ca1b5877>] pcmcia_request_configuration+0x12a/0x349 [pcmcia_core]
[<ca2737c5>] pcnet_config+0x2d6/0x5f2 [pcnet_cs]
[<ca0df100>] ext3_get_inode_block+0x61/0xed [ext3]
[<ca0df9d8>] ext3_do_update_inode+0x2d5/0x346 [ext3]
[<ca0dfa1e>] ext3_do_update_inode+0x31b/0x346 [ext3]
[<ca0dfcfd>] ext3_mark_iloc_dirty+0x18/0x22 [ext3]
[<ca0dd33b>] ext3_splice_branch+0x87/0x105 [ext3]
[<ca0a7a18>] do_get_write_access+0x380/0x39f [jbd]
[<c0143960>] __getblk+0x1d/0x35
[<ca0df1df>] __ext3_get_inode_loc+0x53/0x1fe [ext3]
[<ca0df9d8>] ext3_do_update_inode+0x2d5/0x346 [ext3]
[<ca0dfa1e>] ext3_do_update_inode+0x31b/0x346 [ext3]
[<ca0dfcfd>] ext3_mark_iloc_dirty+0x18/0x22 [ext3]
[<ca1b6a90>] follow_link+0xb0/0x176 [pcmcia_core]
[<ca1b6bb9>] pccard_get_next_tuple+0x63/0x1e7 [pcmcia_core]
[<ca1b7081>] parse_vers_1+0x3c/0x41 [pcmcia_core]
[<ca1b6bb9>] pccard_get_next_tuple+0x63/0x1e7 [pcmcia_core]
[<ca1b6d8f>] pccard_get_tuple_data+0x52/0x5d [pcmcia_core]
[<ca1b7e1b>] pccard_read_tuple+0x55/0x89 [pcmcia_core]
[<ca273bd0>] pcnet_event+0x9b/0x164 [pcnet_cs]
[<ca2e3ced>] pcmcia_register_client+0x26c/0x28a [pcmcia]
[<c0111950>] scheduler_tick+0x17/0x2d7
[<c02126ee>] alloc_netdev+0x74/0x87
[<ca27309e>] pcnet_attach+0x9e/0xc3 [pcnet_cs]
[<ca273b35>] pcnet_event+0x0/0x164 [pcnet_cs]
[<c01977ba>] kobject_get+0x12/0x17
[<ca2e3230>] pcmcia_device_probe+0x47/0x9c [pcmcia]
[<c01e917c>] driver_probe_device+0x36/0x54
[<c01e91db>] device_attach+0x41/0x82
[<c01e9670>] bus_rescan_devices_helper+0x15/0x20
[<c01e8fef>] __bus_for_each_dev+0x4f/0x7f
[<c01e96a5>] bus_rescan_devices+0x2a/0x3b
[<c01e965b>] bus_rescan_devices_helper+0x0/0x20
[<ca2e3a27>] bind_request+0x112/0x16c [pcmcia]
[<ca2e4699>] ds_ioctl+0x4d8/0x587 [pcmcia]
[<c014fc5d>] do_ioctl+0x49/0x4f
[<c014feb3>] vfs_ioctl+0x16c/0x179
[<c014ff06>] sys_ioctl+0x46/0x60
[<c0102f31>] syscall_call+0x7/0xb
handlers:
[<ca1c17d3>] (yenta_interrupt+0x0/0x85 [yenta_socket])
[<ca1c17d3>] (yenta_interrupt+0x0/0x85 [yenta_socket])
Disabling IRQ #11
eth%d: resetting 8390
eth0: NE2000 Compatible: io 0x300, irq 11, mem 0xc00d1000, auto xcvr, hw_addr 00
:04:AC:84:59:C0
ttyS2 at I/O 0x3e8 (irq = 11) is a 16550A
eth0: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
--
Ryan Underwood, <[EMAIL PROTECTED]>
-------------------------------------------------------
This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening
July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual
core and dual graphics technology at this free one hour event hosted by HP,
AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
