Hi @all, i have a Sandisk cruzer micro 1GB Stick (USB2.0) but when i plug it into my Fedora Core 3 Box i is just recognized as an USB 1.1 device. Here the dmesg output:
hub 1-0:1.0: state 5 ports 6 chg 0000 evt 0040 ehci_hcd 0000:00:03.3: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:03.3: port 6 full speed --> companion ehci_hcd 0000:00:03.3: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT hub 3-0:1.0: state 5 ports 3 chg 0000 evt 0008 ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [2] = 0x00010101 CSC PPS CCS hub 3-0:1.0: port 3, status 0101, change 0001, 12 Mb/s hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x101 ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS usb 3-3: new full speed USB device using ohci_hcd and address 3 ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS usb 3-3: ep0 maxpacket = 8 usb 3-3: default language 0x0409 usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-3: Product: Flash Disk usb 3-3: Manufacturer: Generic usb 3-3: SerialNumber: 200511151939 usb 3-3: hotplug usb 3-3: adding 3-3:1.0 (config #1, interface 0) usb 3-3:1.0: hotplug usb-storage 3-3:1.0: usb_probe_interface usb-storage 3-3:1.0: usb_probe_interface - got id scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning drivers/usb/core/inode.c: creating file '003' hub 3-0:1.0: state 5 ports 3 chg 0000 evt 0008 Vendor: SanDisk Model: USB 2.0 Rev: %z!Y Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 2060544 512-byte hdwr sectors (1055 MB) ohci_hcd 0000:00:03.1: urb ebbd89e0 path 3 ep1in 93120000 cc 9 --> status -121 sda: Write Protect is off sda: Mode Sense: 0b 00 00 08 sda: assuming drive cache: write through SCSI device sda: 2060544 512-byte hdwr sectors (1055 MB) ohci_hcd 0000:00:03.1: urb e576f340 path 3 ep1in 92120000 cc 9 --> status -121 sda: Write Protect is off sda: Mode Sense: 0b 00 00 08 sda: assuming drive cache: write through sda: sda1 sd 3:0:0:0: Attached scsi removable disk sda usb-storage: device scan complete cat /proc/bus/usb/devices: T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.15 ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:03.1 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=1043 ProdID=8006 Rev= 1.00 S: Manufacturer=Generic S: Product=Flash Disk S: SerialNumber=200511151939 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.15 ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:03.0 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.15 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:03.3 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms I have installed the latest Kernel(2.6.15) from kernel.org. Any hints to get it running at the right speed? I tried the stick under Windows and its running at high speed. THX Daniel -- DSL-Aktion wegen großer Nachfrage bis 28.2.2006 verlängert: GMX DSL-Flatrate 1 Jahr kostenlos* http://www.gmx.net/de/go/dsl ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
