Hi,
I was thinking the same thing. But the rear i/o panel ports give the
same problem.
Just to see what would happen, I plugged the cd/dvd recorder in before
booting the system. And viola, the system recognized the burner. So this
sounds like a hot-plugging problem perhaps. I thought hot-plugging was
part of the kernel now, in particular the 2.6 kernels.
Thanks,
Gary
Stephen J. Gowdy wrote:
Where are you plugging it in? If there really is nothing in dmesg it could
be that the ports are not attached correctly (or at all) if it is the
front of the case.
On Sun, 16 Apr 2006, Gary aka SportbikeRR wrote:
Hi,
I have an Intel SE7501CW2 board that I have been unable to get
usb-storage to work correctly using FC1, FC4 with kernel 2.6.16, Centos
v3.6. I have rebuilt the kernel on each of the versions several times
verifying that the appropriate USB options have been chosen based on the
multitude of HowTos. The kernel does not report anything in
/var/log/messages or via dmesg.
I have a Gigabyte GA-6VTXDR-C running FC1 for several years, and
usb-storage works perfectly. And this is what sold me. But after
spending more than a week without any success I'm ready to go back to
Windows. If I leave Linux now, I will not be coming back for a long time.
Output from lspci -v for the USB hubs -
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev
02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation: Unknown device 3425
Flags: bus master, medium devsel, latency 0, IRQ 201
I/O ports at 6c00 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev
02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation: Unknown device 3425
Flags: bus master, medium devsel, latency 0, IRQ 209
I/O ports at 6c20 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #3) (rev
02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation: Unknown device 3425
Flags: bus master, medium devsel, latency 0, IRQ 169
I/O ports at 6c40 [size=32]
Output from lsmod -
Module Size Used by
usb_storage 64320 0
parport_pc 31468 1
lp 17088 0
parport 40264 2 parport_pc,lp
autofs4 23300 2
sunrpc 150052 1
dm_mod 57620 0
video 19332 0
button 10768 0
ac 9092 0
uhci_hcd 36240 0
hw_random 10136 0
i2c_i801 12940 0
i2c_core 25856 1 i2c_i801
shpchp 50624 0
pci_hotplug 14724 1 shpchp
e100 39684 0
mii 9856 1 e100
e1000 111028 0
floppy 68156 0
ext3 133768 2
jbd 60692 1 ext3
aacraid 61696 0
sd_mod 22144 0
scsi_mod 135692 3 usb_storage,aacraid,sd_mod
Output from /proc/bus/usb/devices after attaching my cd/dvd writer -
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.16_fc4_smp_2006-04-15 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.16_fc4_smp_2006-04-15 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.16_fc4_smp_2006-04-15 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
Thanks for the help and advice!!
Gary
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
--
/------------------------------------+-------------------------\
|Stephen J. Gowdy | SLAC, MailStop 34, |
|http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, |
|http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA |
|EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 |
\------------------------------------+-------------------------/
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
