Hello, I've got two systems here: a VIA EPIA M10000 and a VIA EPIA CN10000. The OS is identical: Linux 2.6.19.2 on Debian Etch. The harddisks of the two systems are exact mirrors with rsync, so I think that rules out configuration errors.
Relevant differences between the two systems: the M10000 has a VT8235M south bridge while the CN10000 has a VIA VT8237R. The problem I'm having: The M10000 is OK: inserting a USB2.0 pen drive and it is detected as a high-speed device. The CN10000 is not OK: inserting the same USB2.0 pen drive is detected as a full-speed device, with USB1.1 transfer speeds. Same behaviour with a USB2.0 Western Digital external 250GB harddisk. Having only full-speed on an external 250GB harddisk isn't exactly fun... Some cut/paste of the kern.log file: M10000, upon insertion of the pen drive: --------------------------------------------------------------------- Jan 21 14:22:21 vanaalten kernel: usb 4-2: new high speed USB device using ehci_hcd and address 3 Jan 21 14:22:21 vanaalten kernel: usb 4-2: configuration #1 chosen from 1 choice Jan 21 14:22:21 vanaalten kernel: scsi1 : SCSI emulation for USB Mass Storage devices Jan 21 14:22:21 vanaalten kernel: usb-storage: device found at 3 Jan 21 14:22:21 vanaalten kernel: usb-storage: waiting for device to settle before scanning Jan 21 14:22:26 vanaalten kernel: scsi 1:0:0:0: Direct-Access Generic USB Flash Disk 2.00 PQ: 0 ANSI: 2 Jan 21 14:22:28 vanaalten kernel: ready Jan 21 14:22:28 vanaalten kernel: SCSI device sda: 255488 512-byte hdwr sectors (131 MB) --------------------------------------------------------------------- CN10000, upon insertion of the pen drive: --------------------------------------------------------------------- Jan 21 12:04:36 vanaalten kernel: usb 1-1: new full speed USB device using uhci_hcd and address 2 Jan 21 12:04:36 vanaalten kernel: usb 1-1: configuration #1 chosen from 1 choice Jan 21 12:04:36 vanaalten kernel: scsi1 : SCSI emulation for USB Mass Storage devices Jan 21 12:04:36 vanaalten kernel: usb-storage: device found at 2 Jan 21 12:04:36 vanaalten kernel: usb-storage: waiting for device to settle before scanning Jan 21 12:04:41 vanaalten kernel: scsi 1:0:0:0: Direct-Access Generic USB Flash Disk 2.00 PQ: 0 ANSI: 2 Jan 21 12:04:41 vanaalten kernel: SCSI device sdb: 255488 512-byte hdwr sectors (131 MB) --------------------------------------------------------------------- So the CN10000 isn't using ehci_hcd, which it should for USB2.0. Something I noticed when I was removing/inserting modules using modconf in kern.log: --------------------------------------------------------------------- Jan 21 14:33:06 vanaalten kernel: ehci_hcd 0000:00:10.4: EHCI Host Controller Jan 21 14:33:06 vanaalten kernel: ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 Jan 21 14:33:06 vanaalten kernel: ehci_hcd 0000:00:10.4: can't setup Jan 21 14:33:06 vanaalten kernel: ehci_hcd 0000:00:10.4: USB bus 5 deregistered Jan 21 14:33:06 vanaalten kernel: ACPI: PCI interrupt for device 0000:00:10.4 disabled Jan 21 14:33:06 vanaalten kernel: ehci_hcd 0000:00:10.4: init 0000:00:10.4 fail, -110 Jan 21 14:33:06 vanaalten kernel: ehci_hcd: probe of 0000:00:10.4 failed with error -110 --------------------------------------------------------------------- So it looks like ehci_hcd isn't loaded correctly on my CN10000 system. I've also compiled the latest available kernel: 2.6.20-rc5. Exactly the same problem (but I got additional iptables problems so I went back to 2.6.19.2). Any suggestions how to solve this problem? Additional information needed? How should I proceed? Thanks, Matthijs ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
