On Sun, 21 Jan 2007, Matthijs van Aalten wrote: > Something I noticed when I was removing/inserting modules using modconf > in kern.log: > --------------------------------------------------------------------- > Jan 21 14:33:06 vanaalten kernel: ehci_hcd 0000:00:10.4: EHCI Host > Controller > Jan 21 14:33:06 vanaalten kernel: ehci_hcd 0000:00:10.4: new USB bus > registered, assigned bus number 5 > Jan 21 14:33:06 vanaalten kernel: ehci_hcd 0000:00:10.4: can't setup > Jan 21 14:33:06 vanaalten kernel: ehci_hcd 0000:00:10.4: USB bus 5 > deregistered > Jan 21 14:33:06 vanaalten kernel: ACPI: PCI interrupt for device > 0000:00:10.4 disabled > Jan 21 14:33:06 vanaalten kernel: ehci_hcd 0000:00:10.4: init > 0000:00:10.4 fail, -110 > Jan 21 14:33:06 vanaalten kernel: ehci_hcd: probe of 0000:00:10.4 failed > with error -110 > --------------------------------------------------------------------- > > > So it looks like ehci_hcd isn't loaded correctly on my CN10000 system. > > I've also compiled the latest available kernel: 2.6.20-rc5. Exactly the > same problem (but I got additional iptables problems so I went back to > 2.6.19.2). > > Any suggestions how to solve this problem? Additional information > needed? How should I proceed?
Turn on CONFIG_USB_DEBUG and post the kernel log messages you get while loading ehci-hcd. You're probably better off using dmesg rather than looking at kern.log. Alan Stern ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
