According to this descriptor dump, it should be supported as a mass
storage device. modprobe usb-storage and see what happens.
Matt Dharm
On Thu, 30 Mar 2000, Ron Forrester wrote:
> On Thu, Mar 30, 2000 at 08:06:44PM +0200, Marc Mutz wrote:
> > Also try the usb-storage driver. Some Digital Still Cameras present
> > themselves as hard drives (rw or ro). I know of one Sony product (it's
> > listed in the working devices page) and I think the Toshibas work also
> > like that.
>
> I got the camera today, and build a 2.3.99-pre3 with just about all
> USB things turned on (including mass storage).
>
> When I plugged the camera in, I got the output attached below, which
> states the device was not recognized by any usb driver.
>
> So, how do I get started on a driver? Any thoughts?
>
> Thanks.
> rjf&
>
> hub.c: port 1 connection change
> hub.c: portstatus 101, change 1, High Speed
> hub.c: portstatus 103, change 0, High Speed
> usb.c: USB new device connect, assigned device number 3
> usb.c: kmalloc IF cf7a3820, numif 1
> usb.c: new device strings: Mfr=0, Product=0, SerialNumber=0
> usb.c: unhandled interfaces on device
> usb.c: This device is not recognized by any installed USB driver.
> Length = 18
> DescriptorType = 01
> USB version = 1.00
> Vendor:Product = 07cf:1001
> MaxPacketSize0 = 8
> NumConfigurations = 1
> Device version = 90.09
> Device Class:SubClass:Protocol = 00:00:00
> Per-interface classes
> Configuration:
> bLength = 9
> bDescriptorType = 02
> wTotalLength = 0027
> bNumInterfaces = 01
> bConfigurationValue = 01
> iConfiguration = 00
> bmAttributes = 40
> MaxPower = 0mA
>
> Interface: 0
> Alternate Setting: 0
> bLength = 9
> bDescriptorType = 04
> bInterfaceNumber = 00
> bAlternateSetting = 00
> bNumEndpoints = 03
> bInterface Class:SubClass:Protocol = 08:06:00
> iInterface = 00
> Endpoint:
> bLength = 7
> bDescriptorType = 05
> bEndpointAddress = 81 (in)
> bmAttributes = 02 (Bulk)
> wMaxPacketSize = 0040
> bInterval = 00
> Endpoint:
> bLength = 7
> bDescriptorType = 05
> bEndpointAddress = 02 (out)
> bmAttributes = 02 (Bulk)
> wMaxPacketSize = 0040
> bInterval = 00
> Endpoint:
> bLength = 7
> bDescriptorType = 05
> bEndpointAddress = 83 (in)
> bmAttributes = 03 (Interrupt)
> wMaxPacketSize = 0002
> bInterval = 01
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
--
Matthew Dharm Home: [EMAIL PROTECTED]
Engineer, Qualcomm, Inc. Work: [EMAIL PROTECTED]
It was a new hope.
-- Dust Puppy
User Friendly, 12/25/1998
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
