I took the suggestion of using usb-storage and see what it thought of
the camera. It does indeed seem to recognize it as a valid device,
giving the output attached below.
However, I have no idea what to do now, i.e. how to actually access
the device, nor can I find any docs on usb-storage in
linux/Documentation or on the net.
Any help is appreciated.
Thanks.
rjf&
hub.c: port 1 enable change, status 100
hub.c: port 1 connection change
hub.c: portstatus 101, change 1, High Speed
hub.c: portstatus 103, change 0, High Speed
usb.c: USB new device connect, assigned device number 3
usb.c: kmalloc IF c9ed1d00, numif 1
usb.c: new device strings: Mfr=0, Product=0, SerialNumber=0
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints In 1 Out 2 Int 3
usb-storage: Result from usb_set_interface is 0
usb-storage: Found existing GUID 07cf10010000000000000000
usb-storage: Allocating IRQ for CBI transport
usb.c: usb-bandwidth-alloc: was: 0, new: 12, bustime = 12 us, Pipe allowed: yes
usb.c: bw_alloc bumped to 12 for 1 requesters
usb-storage: usb_request_irq returned 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
usb.c: usb-storage driver claimed interface c9ed1d00
usb-storage: USB IRQ recieved for device on host 1
usb-storage: Interrupt Status 0x0
usb-storage: ERROR: Unwanted interrupt received!
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
